• 대한치과보철학회지
• /
• 제39권6호
• /
• pp.625-632
• /
• 2001

Statement of Problem. Objective and quantitative measurement of implant stability is very important from implant installation to long-lasting maintenance period thereafter. Purpose of study. This study was to evaluate and compare two ISQ and PTVs on the implant stability measurements according to the increased effective implant length. Materials and methods. Twenty self-tapping fixtures were installed in the bovine scapula and in 10 of those for group I, ISQ and PTVs were obtained in the vertical/horizontal directions according to the increased effective implant length using $Osstell^{TM}$ and $Periotest^{(R)}$. After stability measurement, removal torques were measured between the after installation and after thread exposure group. Results. ISQ and PTVs showed decreased and increased values according to the increased abutment length. Apart from PTVs, ISQ values were shown higher in horizontal direction to the long axis of bone in both the after installation and the after thread exposure groups. Removal torque values were shown higher in after installation group. Conclusion. From the results of this study, implant stability measurement using resonance frequency analysis was more sensitive and discriminative than PTVs measurement.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권2호
• /
• pp.76-81
• /
• 2021

This study proposes a method to reduce the phase error of the received signal to detect the object bearing. The phase shift of the received signal occurs due to the multipath of the signal by natural structure or artificial structures. When detecting the direction of the object using radio waves, the phase of the received signal cannot be accurately detected because of the phase bearing error in the object detection direction. The object detection direction estimation depends on the phase difference, antenna installation distance, signal source wavelength, frequency band and bearing angle. This study reduces the error of the phase bearing by using the phase delay of the relative phase difference for the signals incident on the two antennas. Through simulation, we analyzed the object direction detection performance of the proposed method and the existing method. Three targets are detected from the [-15°, 0°, 15°] direction. The existing method detects the target at [-13°, 3°, 17°], and the proposed method detects the at [-15°, 0°, 15°]. As a result of the simulation, the target detection direction of the proposed method is improved by 2 degrees compared to the existing method.

• 조명전기설비학회논문지
• /
• 제22권11호
• /
• pp.1-8
• /
• 2008

In this paper, the optical properties of the 54[W] LED module have confirmed by changing the angles of LED modules for street light applications. The angle of LED module changed from the $0[^{\circ}]$ to $60[^{\circ}]$ varying by $20[^{\circ}]$ as horizontal direction ${\ominus}_1$. Morever, the angle of LED module changed from the $0[^{\circ}]$ to $15[^{\circ}]$ varying by $5[^{\circ}]$ as vertical direction ${\ominus}_2$. As a result of simulation, the average illumination was about 17[lux] and the overall illuminance uniformity was 0.29 for a 10.39[m] long and 6[m] wide illuminance area at height of 6[m], which is acceptable for street lighting illumination in the Illuminating Engineering Society(IES) standard.

• 조명전기설비학회논문지
• /
• 제18권2호
• /
• pp.150-156
• /
• 2004

단상 전원에 의해 기동되는 영구자석형 단상 동기 전동기는 효율은 높지만, 회전 방향을 결정하기가 어렵다. 본 연구에서는 커패시터 운전 단상 동기 전동기의 기동 특성에 대하여 연구하였다. 고정자는 커패시터 운전 단상 유도기와 동일하지만, 회전자가 영구자석으로 구성된다. 이 경우는 회전자와 고정자 조건에 따라 기동 조건이 결정되고 모터의 회전 방향이 결정될 수 있다. 이 결과에서, 제안된 전동기는 낮은 기동토크를 요구하는 팬과 같은 부하에 적용될 수 있을 것으로 기대된다.

• 조명전기설비학회논문지
• /
• 제21권6호
• /
• pp.71-76
• /
• 2007

본 논문에서는 상용전원이 침수되었을 경우, 이에 의한 인체 감전의 위험성을 실증실험을 통해 검토하였다. 실험을 위해 한쪽 벽면에 노출된 충전부가 설치된 모의수조를 구축하고 내부에 도전성 수용액을 채운 후, 전원으로부터의 거리, 방향, 도전성 수용액의 전도율 및 수위에 따른 전위를 측정하였다. 실험 결과 수중에 설치된 전원장치로 인한 전위분포는 거리에 따라 달라지지만, 침수 수용액의 도전율, 노출된 충전부로부터의 각도 및 측정높이는 전기적으로 미치는 영향이 거의 없음이 확인되었다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.356-359
• /
• 2009

화석연료의 문제점을 보완하고 있는 태양광발전 시스템은 태양전지 모듈의 온도에 따라 출력량이 급격히 변화하는 특성을 가지고 있다. 이러한 특성을 잘 이해하고 전력생산을 극대화하기 위해 태양전지의 온도를 낮추기 위한 방법을 고려하였다. 본 논문에서는 모듈의 앞면과 뒷면에 똑같은 온도 감소 설비를 한 후 뒷면의 온도를 낮추는 것이 발전량에 더 큰 도움을 준다는 결론을 도출하였다.

• 한국공간구조학회논문집
• /
• 제20권4호
• /
• pp.169-176
• /
• 2020

When an unexpected excessive seismic load is applied to the base isolation of arch structure, the seismic displacement of the base isolation may be very large beyond the limit displacement of base isolation. These excessive displacement of the base isolation causes a large displacement in the upper structure and large displacement of upper structure causes structural damage. Therefore, in order to limit the seismic displacement response of the base isolation, it is necessary to install an additional device such as an anti-uplift device to the base isolation. In this study, the installation direction of the base isolation and the control performance of the base isolation installed anti-uplift device were investigated. The installation direction of the base isolation of the arch structure is determined by considering the horizontal and vertical reaction forces of the arch structure. In addition, the separation distance of the anti-uplift device is determined in consideration of the design displacement of the base isolation and the displacement of the arch structure.

• 한국소음진동공학회논문집
• /
• 제22권8호
• /
• pp.784-790
• /
• 2012

This paper describes a stability and dynamic characteristics of bearingless helicopter main rotor in hover. Baseline rotor configuration is defined and modal analysis for the configuration is taken to verify the dynamic characteristics. The kinematic pitch-lag couplings through ways of pitch link installation are analyzed to know effects on loads, frequencies and stability. The effects of pitch link attachments in spanwise direction and chordwise direction as well as pitch link inclination on thrust, power, flpa-lag-pitch mode frequencies and inplane damping are examined. Pitch link at trailing edge location in chordwise direction has influence on aeroelastic stability of the rotor. Also, the pitch link with negative inclination angle makes inplane damping increase.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.394-399
• /
• 2012

This paper describes a stability and dynamic characteristics of bearingless helicopter main rotor in hover. Baseline rotor configuration is defined and modal analysis for the configuration is taken to verify the dynamic characteristics. The kinematic pitch-lag couplings through ways of pitch link installation are analyzed to know effects on loads, frequencies and stability. The effects of pitch link attachments in spanwise direction and chordwise direction as well as pitch link inclination on thrust, power, flpa-lag-pitch mode frequencies and inplane damping are examined. Pitch link at trailing edge location in chordwise direction has influence on aeroelastic stability of the rotor. Also, the pitch link with negative inclination angle makes inplane damping increase.

• 제어로봇시스템학회논문지
• /
• 제11권2호
• /
• pp.122-126
• /
• 2005

A technique for alignment to true north is presented based on synchronized measurements of vision image by a camera and output voltage of wind direction sensor. The true wind direction is evaluated by means of image processing techniques with least square sense, and then evaluated true value is compared with measured output voltage of the sensor. The uncertainty analysis about the component error for the proposed method in practical situation is performed. The proposed technique is applied to real meteorological tower (wind measuring tower) at the Daekwanryung test site. In addition, some uncertainty analysis of this method is presented.