• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.9
• /
• pp.1216-1223
• /
• 2018

As field of application of AMI, AMR uses the power line as the primary means of communication. PLC has a big merit without installation of the new network for communication in a field using the power line which is the existing equipment. However, there is a serious obstacle in commercialization for the instability by noise and communication environment. Therefore, the technical method for maintaining the communication state which overcome such demerit and was stabilized is required essentially. PLC routing technology is applied with the alternative plan now. The routing technology currently managed by field includes many problems by applying the algorithm of an elementary level. PLC routing path search problem can be modeled with the problem of searching for optimal solution as similar to such as optimal routing problem and TSP(Travelling salesman problem). In this paper, in order to search for a PLC routing path efficiently and to choose the optimal path, GA(Genetic Algorithm) was applied. Although PLC was similar in optimal solution search as compared with typical GA, it also has a difference point by the characteristic of communication, and presented the new methodology over this. Moreover, the validity of application technology was verified by showing the experimental result to which GA is applied and analyzing as compared with the existing algorithm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1426-1433
• /
• 2015

CCTV-applied monitoring is an effective measure to suppress potential crimes and record objective relationship; however, there is no methodology that can quantitatively compare and assess the afore-mentioned effects. Thus, this study intended to construct the methodology and analysis application that can measure the changes in the space-corresponding performance of CCTVs depending on installation measures by using 3-dimenstional virtual simulation technology. For analysis, the raster-based Isovist theory was 3-dimensionally expanded and the amount of incident sight line to each point was accumulated. At the same time, the amount of overlapped monitoring in the CCTV cameras that were connected to each measurement node was accumulated for cross-analysis. By applying the examples and analyzing the results, it was possible to construct an analysis application in use of collision detection model and quantify the changes of monitoring performance depending on positioning alternative of the cameras. Moreover, it enabled intuitive review and supplementation by reproducing visible shadow areas in a graph.

• Fire Science and Engineering
• /
• v.31 no.5
• /
• pp.70-77
• /
• 2017

As the quality of live gets better, the frequency of using air conditioner is along drastically increasing. On that matter, setting up measures of preventing increasing fire cases has been required. 43,413 fire cases occurred in last 2016, the cases occurred by electricity account for about 20%(8,655 cases). Among the electricity cases, the amount of cases occurred with air conditioner issues covers 1.5%; causes of the fire incidents vary, including incomplete contacts, short circuits, tracking, and such. In this study, we intend to investigate the case of ignition at the connection point where the power cord connected to the outdoor unit is arbitrarily connected during the air conditioner installation process, and to propose preventive measures against the cause in order to reduce the damage of life as well as the property from electric fire incidents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5290-5299
• /
• 2011

The ultimate purpose of this research is to propose a method to improve water supply management efficiency. As an effort to solve this comprehensive problem, the purposes of this paper are summarized into the following two main subjects. One is the development of a series of demand forecasting models targeting for each theme of urban water such as residential, commercial, industrial water. The other is the suggestion on the development and utilization plan of a GIS-based information system where the developed models are incorporated. For these, a series of efforts were performed such as evaluating and choosing of the candidate field areas, selecting a proper sensor and an installation point for each theme. Installed are sensors, a wireless communication infrastructure, and a field data acquisition and management server. Developed are a protocol for the wireless communication and a real-time data monitoring system. Nextly, the urban water facility-related and other necessary data were handled to make those into a series of GIS-ready databases. Finally, a GIS-based management system was designed and a blueprint for the implementation is suggested.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2195-2200
• /
• 2008

The use of WLAN technology specially 802.11 b and g has seen huge subscriber growth in a relatively short time period due to low cost and ease of installation of WLAN hardware. These technologies provide multiple data rates ranging from 1 to 54 Mbps depending on modulation used in physical layer. This paper presents the performance of 802.11b and g under different data rates in mobile IPv4 environment. OPNET is used in the study as the network simulator. The performance metrics used in this wort is data traffic received by a WLAN station roaming amongst Access Point(AP) of different ESSs. It is found that much data packets are lost during handover between mobile agents. The traffic received by the roaming station varies based on the data rates provided by two different WLAN technologies.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.343-350
• /
• 2019

Objectives: This study aims to identify whether ventilation conditions and their effectiveness can be significantly improved in an experimental chamber by increasing the mixing factor (K-Factor). Methods: In a chamber with a volume of $1m^3$, air velocity was measured at six different points with four roof fans in the upper part of the chamber being operated in order. The impact of the ventilation conditions was analyzed when the flow rates were increasing and the first inlet of the chamber was either open or closed. Smoke patterns were also observed at four corner points where ventilation was limited. Kruskal Wallis and Mann-Whitney tests were performed to compare air velocities measured in the chamber. Results: The air velocities measured at only the third point increased significantly from $0.03{\pm}0.03m/s$ (door open) and $0.05{\pm}0.06m/s$ (door closed) with two fans, $0.08{\pm}0.08m/s$ with three fans, and $0.09{\pm}0.09m/s$ with four fans operating (p<0.05). However, air velocities at the four corner points did not significantly increase. Smoke patters also showed that the open inlet of the chamber had no effect on improvement of ventilation conditions and effectiveness. Conclusions: In this study, the air velocities at six points in the chamber did not significantly increase despite the increase in the mixing factor and flow rates of ventilation in the controlled environment. Therefore, the inflow of outdoor air throughout an open inlet and installation of a forced ventilation system can potentially increase the indoor air velocity and improve ventilation condition without an increase in the mixing factor.

• Advances in aircraft and spacecraft science
• /
• v.3 no.3
• /
• pp.243-257
• /
• 2016

The increase of air traffic volume has brought an increasing amount of issues related to carbon and NOx emissions and noise pollution. Aircraft manufacturers are concentrating their efforts to develop technologies to increase aircraft efficiency and consequently to reduce pollutant discharge and noise emission. Ultra High By-Pass Ratio engine concepts provide reduction of fuel consumption and noise emission thanks to a decrease of the jet velocity exhausting from the engine nozzles. In order to keep same thrust, mass flow and therefore section of fan/nacelle diameter should be increased to compensate velocity reduction. Such feature will lead to close-coupled architectures for engine installation under the wing. A strong jet-wing interaction resulting in a change of turbulent mixing in the aeroacoustic field as well as noise enhancement due to reflection phenomena are therefore expected. On the other hand, pressure fluctuations on the wing as well as on the fuselage represent the forcing loads, which stress panels causing vibrations. Some of these vibrations are re-emitted in the aeroacoustic field as vibration noise, some of them are transmitted in the cockpit as interior noise. In the present work, the interaction between a jet and wing or fuselage is reproduced by a flat surface tangential to an incompressible jet at different radial distances from the nozzle axis. The change in the aerodynamic field due to the presence of the rigid plate was studied by hot wire anemometric measurements, which provided a characterization of mean and fluctuating velocity fields in the jet plume. Pressure fluctuations acting on the flat plate were studied by cavity-mounted microphones which provided point-wise measurements in stream-wise and spanwise directions. Statistical description of velocity and wall pressure fields are determined in terms of Fourier-domain quantities. Scaling laws for pressure auto-spectra and coherence functions are also presented.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.183-189
• /
• 2011

In this study sediments reduction effects on dam have been analyzed in the case of check dam installation in the upstream. Analyzed sediment reduction effects of 27 points conducted for 10 multi-purposes dam, which is target of this study. According to regression analysis result, Sediment reduction effect by installing check dam has shown inclination which increase as area ratio rises. According to analysis result, sediment reduction effect was greatest in Geum-river point at Daecheong-dam. The life-time is estimated to increases about 60% by installing check dams. When Area ratio increases, it was deduced through regression analysis that rise Sediment Reduction Effect by installing check dam. This study can be useful for the management and design plans like the dam's site or priority for placing. Furthermore, it would be able to construct an efficient sand depositing dam if complementary is provided by being considered catchment area and lucrative property.

• Land and Housing Review
• /
• v.12 no.4
• /
• pp.1-13
• /
• 2021

This study investigates the effectiveness of Jeju's public Wi-Fi policy for which the key factors of public Wi-Fi use and location characteristics are analyzed. Spatial regression analysis was conducted within a 100 m radius of public Wi-Fi access points. In the analysis, the dependent variable was public Wi-Fi usage time while independent variables included demographic factors, location factors, and other factors. The findings reveal that demographic factors such as the number of residents, the number of workers, and the number of visitors had a close correlation with the use of public Wi-Fi. In addition, the number of bus stops and land prices of each parcel, land use mix, and AP installation period had a positive correlation with the use of public Wi-Fi. On the contrary, the number of buildings by use, the total floor area of buildings, and the number of tourist attractions had negative correlations with public Wi-Fi usage time. These findings provide policy implications that more active publicity on Jeju's public Wi-Fi is needed and the convenience for access needs to be improved.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.4
• /
• pp.324-332
• /
• 2018

We conducted a questionnaire survey to analyze the current status of the coastal composite fisheries, as well as the improvement point in designing a new type coastal composite fishing boat suitable for Korean fishing environments from April to August 2017. The questionnaire composed of 20 questions about the features of the coastal composite fishing boat and fishing work. The survey sites were selected to cover all parts of the country by considering the geographical position. The significance testing for the response results was accessed by ${\chi}^2$ test and ANOVA. The results revealed that more than half (59.1%) of the fishermen operated one day per voyage and operating alone topped with 22.5% in the number of crews, followed by 2 persons (20.3%) and 5 persons (22.1%). The navigation devices had a high rate of installation and GPS plotter ranked first in the devices. In addition, fish finder ranked first in fishing equipment, followed by net hauler. The most inconvenient work that they felt during the fishing operation was fish handing at 49.8% and other general fishing works like setting and hauling line, deck cleaning accounted for about 25%. The hardest work was the accident by ropes wrapped around propeller and the engine trouble came in second. The most inconvenient facilities to the present design of fishing boat was wheelhouse (76.7%), followed by fish hold (38.5%), and deck (35.1%). Furthermore, inconvenient points related to the movement of fishing gear, noise and vibration of engine, slippery deck and small fish hold exceeded 50%.