• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.4
• /
• pp.263-268
• /
• 1994

Field microplot(D 20cm, L 85cm) experiment filled with Bonryang sandy loam soil(Typic Udifluvents) was conducted to obtain quantitative information on the change of soil pH under different soil moisture regime and ladino clover cultivation, and the movement of applied nutrient under the rainfed bare soil condition. Slaked lime increased soil pH of the applied layer. $NH_4-N$ evolved from urea hydrolysis was more effective in raising the subsoil pH rather than the exchangeable Mg and Ca. Under the different soil miosture condition downward movement of Cl and $NO_3-N$ lowered subsoil pH during the middle of ladino clover growth. Leaching of CI and $NO_3-N$ down to the out of the soil microplot and increasing movement of Ca and Mg into the subsoil produced. a slight increase of subsoil pH during the late crop growth. The mean downward movement of applied nutrient 5.5 months after field installation of microplot in the bare soil under rainfed condition(1207mm) was in the order : Cl= more than 80.0>Inorganic nitrogen= 75.8>K= 67.3>Mg=62.7>Ca=18.1>P=2.3cm respectively.

• Journal of Technology Innovation
• /
• v.18 no.2
• /
• pp.59-89
• /
• 2010

One of the key words that represent the culture and social phenomena in this 21st century is 'Digital Convergence'. Presently our society is going through the second evolving phase of the convergence, integration between industries. Integration between industries refers to the phenomenon of integrating various industrial areas such as broadcasting, communication, finance, automobile, and medical treatment as the range of IT utilization becomes extended. The telecommunication-broadcasting bundling is a typical example of integration between industries. This study analyzed the effect of the service features of the bundling on the customer's acceptance intention by applying the innovative technology product acceptance model, TAM, in the process of accepting the telecommunication-broadcasting bundling. This study suggests three independent variables, the 'low cost(discount)', 'service integrity', and 'selectability', which affect perceived usefulness, perceived ease of use, and perceived risk, and figures out the actual influence as follows. In conclusion, these results suggest that in order to accept and spread the telecommunication-broadcasting bundling, it is necessary to establish (1) the cost discounting strategy realize (price strategy), (2) the fee noticing system, payment system, call-service system, and systemic integration including installation and A/S system integration, and develop (service strategy), (3) the bundling or related options that can provide users with selectability (product strategy).

• The Journal of the Convergence on Culture Technology
• /
• v.3 no.3
• /
• pp.43-49
• /
• 2017

The purpose of this study is to study the standardization of the core business process in the chemical manufacturing industry and to establish a production information management system for the purpose of establishing the production information management system that can achieve mid -To be applied. The development methodology for the standardization of the chemical manufacturing information system is applied to the production information management system development methodology (PSDM) that was developed and developed by the Agency for Technology and Information Promotion of Small and Medium Enterprises. The standardization target is the system structure, It is a core business process that becomes a skeleton during construction. In this study, the chemical manufacturing SMEs and related professional IT companies who want to build the production information management system can apply the standardized core business process more effectively to build the system more effectively, and provide ease of installation and reliability to the system, In order to maximize the utilization of processes, follow-up education training and maintenance measures are suggested. Applying the results of this study, it is possible to eliminate the unreasonable elements of the production process, improve the quality of production product, and reduce production cost.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.8
• /
• pp.53-63
• /
• 2013

Bored pre-cast piles using PHC piles is widely used in foundation of building structures constructed in urban areas because noise and vibration due to pile installation are low. However, since slime is formed at the base of borehole and the density of bearing stratum surrounding the base of borehole is decreased due to stress relaxation in drilling process of bored pre-cast pile method, the base load capacity of bored pre-cast piles is very low compared to the strength of bearing stratum. In this study, a new type of PHC pile, which short steel pipe with the same diameter as the PHC pile is attached to the pile tip, is developed to increase the base load capacity of bored pre-cast piles. In order to check the effect of the use of new PHC pile on the base load capacity of bored pre-cast piles, field pile load tests are performed for bored pre-cast piles using the new and existing PHC piles. Results of the pile load tests show that the new PHC pile gives higher base load capacity to bored pre-cast piles than the existing PHC pile, since the tip of new PHC pile is penetrated to undisturbed bearing stratum passing through the slime at the base of borehole and the loosened bearing stratum under the slime by pile driving using light hammer.

• Journal of the Korean earth science society
• /
• v.36 no.6
• /
• pp.501-511
• /
• 2015

This study suggests a method of alleviating global warming by the increase of the Earth surface albedo through Artificial Sea ice Increasing (ASI) over the Available Freezing Areas (AFA). The method is developed based on the fact that the large sea surface area in or near the Arctic and the Antarctic has no ice even though both water and air temperatures are below zero and the artificial sea ice generation is thus available. The mean energy of $0.85Wm^{-2}$, which was suspected of adding to the earth by the global warming effect was calculated to offset at once when the sea ice area about $4.09{\times}10^6km^2$ was additionally increased. In addition, three techniques for producing ice plates on the sea surface (using ships, installation apparatus, and floating matter such as Green Cell Foam) for ASI were proposed. According to the result of simple analysis using the energy balance model, when ASI was maximally operated only for 3 months (September, October, and November) over AFA, it is expected that the annual mean temperature of earth surface would be decreased about $0.11^{\circ}C$ in the following year. On the other hand, in case of generating the artificial sea ice in all four seasons, a risk of triggering snowball earth was detected.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.353-361
• /
• 2017

The purpose of this study is to provide basic data to confirm the necessity and effectiveness of the memory school by investigating the perception of users and caregivers about the services and programs provided by the memory school, a social welfare institution for the elderly with minor dementia. For this purpose, 363 students and students in Daegu City were surveyed about the satisfaction and attitude of using memory school. As a result of the analysis, it was found that the use of the memory school is very helpful to the users, and at the same time, it is very meaningful for the decrease of the caregiver burden of the caregiver. Thus, it can be seen that the memory school has the effect of appropriately matching the installation purpose of the facility. In particular, it was found that the degree of satisfaction with the program level, type of service, and future sustainability of the memory school exceeded 90%. Therefore, this study aims to provide policy implications for the social welfare response for the elderly with mild dementia and for the basic data on the memory school for this purpose.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.121-133
• /
• 2017

Since the mid 1990s, policies have been actively promoted to improve safety and pedestrian environment around the school such as the improvement of School zone. However, the prevention of accidents was not effective because it did not extend to the school road where the main transportation route for children's commuting takes place. In addition, due to the rapid increase of automobiles, trunk road traffic in the peak time bypasses the back roads, which threatens children's safety and the environment by invading the school area, which is the main living space of children. In this study, the characteristics of domestic children's traffic accidents were investigated and the problems were analyzed by conducting a field survey on Yeouido Secondary School in Seoul and Unjung Elementary School in Gyeonggi Province. In addition, Variable speed limit signs and Beacons were installed in the pedestrian road of comunity including School zone, and the effects of facilities on the speed of vehicles were analyzed. As a result of the analysis, the Variable speed limit sign showed a deceleration effect of about 8.3km/h, and the Beacon showed a phenomenon in which the traveling speed of 0.8km/h increased only slightly. In addition, the traffic violation rate of passenger cars, buses, and lorries decreased by about 3% as a result of investigating the number of traffic violation vehicles before and after installation.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.314-320
• /
• 2014

Regarding the design of the gas sweetening absorber, the gas distribution analysis for the increase of the sour gas removal and reduction of the tower height is very important research topics. Recently, regarding the $CO_2$ capture technology which is a promising option for the reduction of the greenhouse gas (GHG), the need for the gas distribution improvement is increased as the gas treating capacity increases. In this paper, we have investigated the sour gas distribution in the absorber using CFD (Computational Fluid Dynamics) based on 10 MW post-combustion $CO_2$ capture plant installed in Boryeong power station, Korea Midland Power company. For this purpose, we suggested the three possible technology options (splash plate, spiral gas line and U-tube) for the gas distribution enhancement and compared the effect of the each cases. The result showed that the U-tube installed in the absorber increase the gas distribution about 30% compared to the base case, while the delta P increasement was about 10%. From these results, it was found that the U-tube installation is an effective technology option for the gas distribution enhancement in the gas sweetening absorber.

• Journal of Bio-Environment Control
• /
• v.18 no.3
• /
• pp.185-191
• /
• 2009

The construction of experimental greenhouses, operating test, and analysis on variation of different environment factors were conducted to provide fundamental data for design of Korean style air-inflated double-layer plastic greenhouse. The development of technology of attaching plastic to the structure and fasteners to be able to keep airtight was required in order to maintain proper static pressure in air space of double layer coverings. The insulation effect of air inflated greenhouse was better than conventional type. The temperature of arch type roof was greater about $2^{\circ}C$ than peach type roof in air inflated greenhouse. It was recommended that the plastic should be attached at the edges without clearance length in order to ease installation and raise airtightness of double layer coverings. The transmittance of arch type roof was greater than peach type in air inflated one span greenhouse. The transmittance of air inflated greenhouse was greater than conventional type due to frame ratio and distance between double layers in three span greenhouse. The condensation occurred on conventional type greenhouse was more than air inflated type. It was required to examine for a long time in order to analyze it quantitatively.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.6
• /
• pp.653-664
• /
• 2015

When the structural analysis is performed for the concrete lining of the water pressure tunnel, many parameters are considered such as relaxed ground loads, internal water pressure, external water pressure, the shrinkage of the concrete lining, grouting pressure, etc. But, there are no standards and manuals for the structural analysis for the concrete lining of the water pressure tunnel. Above all, the external water pressure has an much effect on the stability of tunnel. So, in case that permeability of ground is large, the external water pressure should be decreased by installation of weep hole, or reinforced ground by ground improvement grouting should be pressed by the external water pressure instead. But, when weep hole is installed to reduce the external water pressure, the many problems may me occurred. Thus, reasonable approach for treatment of the external water pressure is necessary if weep hole is not installed. Therefore, the purpose of this study is to analyze design cases and studies for treatment of the external water pressure in performing structural analysis for the concrete lining of the water pressure tunnel, and to find reasonable method for tunnel lining modeling which is the treatment of the external water pressure according to permeability of ground and consequently the design of ground improvement grouting.