• 제목/요약/키워드: Installation Cost

검색결과 1,175건 처리시간 0.025초

해안개발사업의 부유토사 저감방안의 현황 및 개선방안 - 오탁방지막을 중심으로 - (Status and Improvement of the Mitigation Option to the Suspended Sediments in Coastal Development Projects - Focused on Silt Protector -)

  • 맹준호;조광우;주용준
    • 환경영향평가
    • /
    • 제15권5호
    • /
    • pp.289-297
    • /
    • 2006
  • The study investigates the problems of silt protector used for mitigation measure of suspended sediments (SS) during coastal construction and provides their improvements based on the field investigation and analysis of the environmental impact assessment reports for the coastal development projects of Korea. The field investigation along west, east and south coasts of Korea reveals a variety of problems in the installation and management of silt protector solely used for the SS mitigation in Korea. Major problems include installation itself, low cost and quality of silt protector, and maintenance. These problems superimpose the effectiveness of silt protector in mitigating coastal environment impact. The present study provides the specific guideline on the project type needed for the installation of silt protector, installation standard and planning, maintenance and management. The study also suggests new mitigation options such as environmental window to limit the construction period and environmental dredger to compensate for the deficits of silt protector.

SWOT/AHP 분석을 통한 전략적 AMP 설치 활성화 방안 (Strategic Vitalization Method of AMP Installation through SWOT/AHP Analysis)

  • 김인호;이강원
    • 산업경영시스템학회지
    • /
    • 제42권4호
    • /
    • pp.49-60
    • /
    • 2019
  • Recently the concentration of fine dust and ultra fine dust becomes so bad, which seriously threatens the health and even the life of people. So, government started to investigate several ways to reduce the amount of fine dust and ultra fine dust. From a few years ago it has been known that ships anchored at port emit a lot of pollution and seriously affect air quality of neighboring cities. To reduce the pollution emitted by ship AMP (Alternative Maritime Power Supply) has been proposed, which uses the electricity instead of bunker C oil or diesel. Many developed countries already installed AMP to improve air quality in port area. Korea is in the stage of planning to install AMP at port. However, there are many complicated problems to be handled before AMP installation. Due to huge initial cost and long period of construction ship owner and habour operating company are reluctant to AMP installation. And there are serious technological difficulties in constructing AMP in existing harbour. Lack of AMP core technology and operational difficulties of AMP are also big challenges to be conquered. In this study SWOT/AHP method is used to find strategic and efficient ways to handle above complicated challenges and then to vitalize the AMP installation.

원형검지기와 기존검지기의 비교 분석에 관한 연구 (A Comparison Between Round Loop and Existing Octagonal Loop Detectors)

  • 장덕명;김영남
    • 대한교통학회지
    • /
    • 제12권4호
    • /
    • pp.35-52
    • /
    • 1994
  • In order to operate the computerized traffic signal system, it requires the detectors which ensure the exact detections of actual traffic data (e.g., traffic volume, occupancy and velocity of vehicles). The octagonal detectors are used currently in Korea. However, the maintenance of the detectors has many problems with the road repairs and the constructions on the pavement, and failure due to the disconnection of the wires. Serious delay due to the long installation time of loops also causes the traffic disturbances. The low sensitivities and splash-over effect can sometimes create error data after installation of the octagonal loops. The mai purpose of this study is to evaluate the feasibility of domestic use of the round (circular) inductive loops which developed recently in U.S.A. It was found that the round loops are comparable to the existing octagonal loops. In addition, the use of the high quality of materials in the round loop system can reduce the current problems and weakpoints of the octagonal loops. The installation cost of the round loop was found out as economic as the octagonal loop. The installation time of the round loop system can be reduced with the specially equipped loop truck, and wide/deep slots without sharp corners can extend the durability without serious stress of loop head wires. In conclusion, the round loop is superior to the octagonal type in overall points. It is recommended that the localization of the materials and equipments of round loop system is required to carry out the extensive local installations. Also, several contractors to meet the nationwide demand should be arranged to gurantee the proper maintenance and operation of the systems.

  • PDF

트렌치내에서 복합 해저 관로 안정성의 수치해석과 실험해석 비교 (Comparison of Numerical and Experimental Stability of Dual Subsea Pipeline in Trench)

  • Chul H. Jo;Young S. Shin;Sung G. Hong;Kyoung H. Min;Chung, Kwang-Sic
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2001년도 춘계학술대회 논문집
    • /
    • pp.254-259
    • /
    • 2001
  • There are advantages in the installation of dual subsea pipelines over two separate single lines. In many case it can reduce the cost for trench, back-filling and installation. However the installation of dual pipelines often requires technical challenges. Dual Pipelines should be placed to be stable to external loading not only during the installation but also in the design life. Dual pipelines in trench can reduce the influence of external forces. To investigate applied forces as slope changes, number of experiments are conducted with PIV (Particle Image Velocimetry) in a circulating water channel. Numerical approaches are also made to compare with experimental results. The velocity fields around dual pipelines in trench are investigated and analysed. Comparison of both results show similar pattern of flow around dual pipelines. it is proved that the trench slope affects the pipeline stability significantly. The results can be applied in the stability design of dual pipelines in trench section. The complex flow patterns can be referenced effectively linked in the understanding of fluid around circular bodies in trench.

  • PDF

해상풍력 석션버켓 기초 구조-지반 상호작용 비선형 구조해석 및 실험결과 비교 (Nonlinear Structure-Soil Interaction Analysis for the Suction Bucket Foundation of Offshore Wind-Turbine)

  • 진정인;김동현;정민욱
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제2권3호
    • /
    • pp.469-475
    • /
    • 2016
  • 최근 석유 에너지 고갈의 문제에 봉착함에 따라 신재생 에너지, 즉 풍력 에너지 분야에 대한 연구가 자연스럽게 부각되고 있다. 그 중 해상풍력은 육상풍력에 비교해 바람 자원이 풍부하기 때문에 효율성 측면에서 주목 받고 있지만 전체 시스템의 설치비용에 따른 경제성이 중요한 문제가 되고 있다. 일반적으로 해상 풍력 사업의 구성비에서 지지구조물 설치비용의 비율이 통상 25% 이상을 차지하는 경향이 있으며, 설계된 지지구조에 대해 정확한 해석과 분석이 가능 하다면 설치 및 시공분야의 경제성을 확보하는데 중요한 역할을 할 수 있다. 본 연구에서는 해상 부유식 풍력발전시스템의 경제성 확보에 중요한 역할을 할 수 있는 석션버켓 기초의 지반연성 비선형 구조해석 기법을 구축하고 이에 대한 검증을 위해 실험결과와 비교검증을 수행하였다.

해상풍력발전 단지배치에 따른 민감도 분석에 관한 연구 (A Study on the Sensitivity Analysis of Offshore wind farm Design)

  • 김도형;장은영;경남호;김홍우;김성완;김창석
    • 한국태양에너지학회 논문집
    • /
    • 제31권3호
    • /
    • pp.29-35
    • /
    • 2011
  • This study draws economic expense factors according to the influence of generation resulted from slipstream and the arrangement of the complex when arranging and designing the complex for offshore windpower development as a model of 50MW offshore wind farm and conducts economics analysis. According to the result of the analysis, O (Optimize) arrangement was the one that has the highest generation for having the best windpower resources in terms of design and being least affected by slipstream; however, the arrangement requires expensive submarine cables and high installation cost. Therefore, according to the analysis of economics, it was thought that 50MW complex should have less economics as BC ratio 0.95 than the series arrangement of main wind direction and I+80 series arrangement would be rather more economical. This economics evaluation provides comparison according to the arrangement of the development complex considering the uncertainty of the electricity price and gross construction cost. And it is expected that the result of economics evaluation would greatly differ by installation capacity, and the reason is that the cost of electric infrastructure takes up a higher portion than the gross construction cost of the development complex. The only way to compensate this part is to make the windpower development complex larger. It seems that it will be necessary to enhance spot applicability to evaluate economics afterwards and pay consistent attention to and conduct follow-up research on the economics evaluation of the complex construction.

경찰CCTV 운용상의 문제점과 개선방안 (A Study on the Problems in the Use of CCTV by the Police and Some Proposals)

  • 이상원;이승철
    • 시큐리티연구
    • /
    • 제10호
    • /
    • pp.215-242
    • /
    • 2005
  • 현대범죄의 특징인 지능화, 광역화, 폭력화 등의 범죄 형태에 효율적인 범죄예방 및 진압을 하기 위한 방안의 하나인 기계경비시스템을 이용한 공공장소에서 CCTV의 감시는 일상생활에서 널리 사용되고 있다. 이는 급속히 발달하고 있는 과학기술을 이용한 경찰활동으로 증가하는 범죄사건을 효율적으로 대응할 수 있는 대안점이기도 하다. 그러나, 이러한 CCTV의 폭넓은 활용은 범죄예방이라는 긍적적인 점과 시민의 기본권 침해라는 양자간의 가치가 충돌하는 문제가 발생되고 있다. 공공부문에 있어서 경찰의 CCTV활용은 그 효과성에 대한 명확한 논의가 계속되고 있음에도 불구하고 계속적으로 증대하고 있다. 이것은 시민의 기본권에 대한 침해의 소지가 많아 생겨날 수 있다는 것이다. 기본권의 침해는 쉽지만 그 회복은 많은 비용과 시간이 투입되어야 한다. 또한, 현재 한국에서는 CCTV 운용에 대한 구체적인 법적 규제도 없는 현실에서는 자칫 시민의 기본권 침해에 대한 사실을 무감각하게 만들 수 있다는 것이 문제가 될 수 있다. 본 연구에서는 경찰의 CCTV활용에 대한 선행연구를 기초로 한 법적 문제점, 설문조사를 통한 인식적측면을 고찰하고, 선진국들의 CCTV활용에 대한 현황을 기초로 하여 법적측면과 인식적측면 운영적측면을 중심으로 한국 경찰의 CCTV 운영에 대한 개선방안을 제시하고자 하였다.

  • PDF

비용편익 분석에 기초한 공동구의 경제적 타당성 평가 (Economic Feasibility of Common Utility Tunnel based on Cost-Benefit Analysis)

  • 강영구;최익창
    • 한국안전학회지
    • /
    • 제30권5호
    • /
    • pp.29-36
    • /
    • 2015
  • Common utility tunnel is essential to the daily lives of people underground utilities (electricity, gas and supply facilities such as water, communication facilities, sewer facilities, etc.) to improve the appearance by co-acceptance and disaster prevention, important for the conservation of the city's population was concentrated road construction the city-based facilities. There is recognition of the importance of the various supply treatment facilities in common utility tunnel as infrastructure to accommodate joint according to the city expanded, the demand for infrastructure. In this paper, a cost-benefit analysis using a one-time occurrence, without simply relying on cost or current cost, project manager for the city-dimensional feasibility study conducted, the user level of the maintenance costs and user costs, including social costs items from various angles can be investigated and proposed a mechanism of economic feasibility common utility tunnel. Evaluation of the proposed technique is cost-benefit and cost caused by installing common utility tunnel the existing pipeline area - was investigated by the benefit analysis, extended and repeated common utility tunnel installation depends much affected by the excavation, so users of reducing the number of repeat excavation convenience can be seen that this occurs.

사설 및 농어촌 통합 디지탈 교환기 (Service Integrated Digital PBX / RX)

  • Jeong Rhul Lee
    • 정보와 통신
    • /
    • 제9권1호
    • /
    • pp.37-42
    • /
    • 1992
  • This paper presents a multi-purpose digital exchange which can be used as a private branch exchange(PBX) or a rural exchange(RX) or an exchange for the private special network. This new idea provides various features, reduced cost of installation and operation, easy expansion, replacement and relocation or reuse for another purpose at other locations.

  • PDF

모듈러 건축 타워크레인 운용 계획의 대안 평가 모델 - 유닛 설치 및 마감공사를 중심으로 - (Alternative Evaluation Model for Tower Crane Operation Plan in Modular Construction - Focusing on Modular Unit Installation and Finishing works -)

  • 김주호;박문서;이현수;현호상
    • 한국건설관리학회논문집
    • /
    • 제19권2호
    • /
    • pp.50-60
    • /
    • 2018
  • 최근 인력자원 투입량 감소 및 공기단축이 가능한 모듈러 건축공법은 반복 공정이 많은 기숙사, 주거시설, 호텔 공사 등에 다양하게 적용되고 있다. 모듈러 건축공법은 유닛 설치비용을 제외한 현장 공사비에서 외장 마감공사 비용의 비중은 약 40%를 차지하며, 마감공사는 목표공기와 비용을 유지하는데 주요한 역할을 한다. 모듈러 현장에서 유닛 설치 및 마감공사 수행을 위해 한정된 장비가 후속 액티비티에 영향을 주지 않도록 공유되어야 하며 현장 마감 비중이 커지는 모듈러 프로젝트일수록 공정관리에서 양중 계획은 매우 중요하기 때문이다. 이와 같은 T/C 운용 계획은 단일 사이클 또는 다중 사이클의 형태를 가지게 되며 사이클 주기 조율은 장비효율을 높일 수 있다. 그러나 유닛 설치 및 마감공사를 지원하기 위한 T/C 운용 계획의 대안을 평가하는데 어려움이 있다. 따라서 본 연구는 모듈러 건축 현장에서 T/C 운용의 사이클 주기 설정에 따른 운용방식의 대안을 평가하기 위해 유닛 양중 시간 및 주기, 외장재 양중 시간, 마감 작업 소요시간을 변수화하여 T/C 가동시간과 공정에 주는 영향을 파악한다. 이러한 목적을 달성하기 위해 현장에서 이루어지는 작업 프로세스 분석을 바탕으로 작업 속도를 조절하여 T/C 효율을 증대시킬 수 있는 시뮬레이션 모델을 개발한다. 본 연구는 양중 사이클 개념을 적용한 자원 평준화 방법을 제시함으로써 학술적 기여가 있으며 실무적으로 현장관리자에게 장비 계획의 대안 선택을 위한 기초자료로서 활용될 수 있을 것이다.