• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2344-2353
• /
• 2018

A coupled recursive total least squares (CRTLS) algorithm is proposed for parameter estimation of permanent magnet synchronous machines (PMSMs). TLS considers the errors of both input variables and output ones, and thus achieves more accurate estimates than standard least squares method does. The proposed algorithm consists of two recursive total least squares (RTLS) algorithms for the d-axis subsystem and q-axis subsystem respectively. The incremental singular value decomposition (SVD) for the RTLS obtained by an approximate calculation with less computation. The performance of the CRTLS is demonstrated by simulation and experimental results.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권2호
• /
• pp.157-165
• /
• 2002

Nonlinear analysis of the reinforced concrete beam subjected to torsion is presented. Seventeen equations involving seventeen variables are derived from the equilibrium equation, compatibility equation, and the material constitutive laws to solve the torsion problem. Newton method was used to solve the nonlinear simultaneous equations and efficient algorithms are proposed. Present model covers the behavior of reinforced concrete beam under pure torsion from service load range to ultimate stage. Tensile resistance of concrete after cracking is appropriately considered. The softened concrete truss model and the average stress-strain relations of concrete and steel are used. To verify the validity of present model, the nominal torsional moment strengths according to ACI-99 code and the ultimate torsional moment by present model are compared to experimental torsional strengths of 55 test specimens found in literature. The ultimate torsional moment strengths by the present model show good results.

• Industrial Engineering and Management Systems
• /
• 제9권1호
• /
• pp.54-59
• /
• 2010

A two-plan sampling system is proposed for a failure-censored life testing when the lifetime follows a Weibull distribution with known shape parameter. The proposed sampling system is based on a switching rule, for switching between the tightened and the normal inspection levels when lots are submitted for inspection in the order of production or in some other systematic way. The design parameters of the proposed sampling system are determined by the two-point approach considering the producer's risks and the consumer's at the specified acceptable reliability level and the lot tolerance reliability level, respectively. It has been observed that the proposed system requires only a single failure for the observation.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권3호
• /
• pp.203-211
• /
• 2001

This paper presents load transfer efficiency of skewed transverse joint of jointed concrete pavement with the fatigue model test. A 1/12 scale model was used to satisfy the geometry, loading, material similitude, which are variables to the skew angel of transverse joint. As the test results by fatigue load 700kgf applied, the deflection and stress of transverse joint were decreased as to increasing of skew angle of transverse joint. In addition, load transfer efficiency of transverse joint with skew angle is better than the load transfer efficiency of transverse joint without skew angle.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권3호
• /
• pp.123-130
• /
• 2001

The purpose of this study is to suggest the non-destructive equation for the estimation of concrete strength by ultrasonic pulse velocity at the Age of 28day compressive strength of $600{\sim}1000kg/cm^2$. For this purpose, selected test variables were water-hinder ratio, replacement ratio of silica fume, binder content, maximum size of coarse aggregate and sand-aggregate ratio. From the results, the average increase or decrease of ultrasonic pulse velocity is 61m/sec for each 1% of moisture content. And the correlation equation between the ultrasonic pulse velocity and the compressive strength of concrete is as follows. $F_c=896.3V_p-3514$ ($R^2$ = 0.81) where, $F_c$ : compressive strength($kgf/cm^2$), $V_p$ : ultrasonic velocity(km/sec).

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권4호
• /
• pp.201-207
• /
• 2002

An advanced fiber sheet has been widely used for strengthening of the concrete structures due to its excellent properties such as high strength and light weight. Bond strength is very important in strengthening the concrete structures using an advanced fiber sheet. This research examines the bond behavior between fiber sheet and concrete, investigates the bond strength by the direct pull-out test and the tensile-shear test. To obtain the tensile-shear strength a double-face shear type bond test is conducted. The primary test variables are the types of concrete surface roughness (disk-grinding/chipping) and retrofitting methods (bonding/injection). Thirty specimens were tested to evaluate the bond strength. It is shown that the average bond strength between fiber sheet and concrete by the direct pull-out test and the tensile-shear test is $22.3{\sim}23.1kgf/cm^2$ $17.92{\sim}19.75kgf/cm^2$, respectively.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.85-86
• /
• 2022

Traditionally, the facility inspection was visually conducted by the managers, and consequently the result can be subjective because of different perspective and experience of them. To solve this problem, the studies on this topic has tried to integrate the UAS. However, it is still concerned to use in practice due to the lack of analysis of the performance factors affecting the UAS-based facility condition inspection. Hence, the purpose of this study is to identify the critical factors as well as their correlations by modeling causal loop diagram (CLD). A total of 20 variables were derived in four categorized groups, and the relationships were analyzed. Further study will develop a system dynamics (SD) model to simulate various scenarios based on stock-flow diagram through the defined relationships in this study.

• 한국식품저장유통학회지
• /
• 제30권3호
• /
• pp.459-471
• /
• 2023

뱀장어 생산단계 안전성조사 부적합여부에 영향을 미치는 특성변수를 베이지안 네트워크(BN) 모델을 적용하여 분석하였다. 2012년부터 2021년까지의 통합식품안전정보망(IFSIN)의 뱀장어 생산단계 안전성조사 데이터에 양식장의 HACCP 정보, 지리적 정보 및 용수환경 데이터를 연계하여 BN 모델을 수립하였다. 뱀장어의 부적합여부에 영향을 주는 특성변수로 양식장의 HACCP 인증여부, 양식장의 이전 5년간 검사대상 유해물질의 검출여부, 해당 양식장의 이전 5년간 부적합적발이력, 사용되는 용수환경의 적정성이 제안되었으며, 이때 용수환경의 적정성은 총대장균군과 총유기탄소량으로부터 산출되었다. 뱀장어 부적합이 발생할 확률이 가장 높은 경우는 지난 5년간 검사대상 유해물질의 검출이력이 있으면서 동시에 부적합 적발 이력이 있는 HACCP 인증을 받지 않은 양식장으로서, 용수환경도 총대장균군 또는 총유기탄소가 높아 오염이 의심되는 용수를 사용하는 경우로 이때 부적합이 발생할 확률은 24.5%로 뱀장어 생산단계 안전성 조사 시 부적합률인 0.26%의 94배 높았다. 2022년 1월부터 8월까지 뱀장어 양식장 안전성조사 결과를 시험용 데이터세트(6,785건 중 부적합 15건)로 하여 BN 모델의 적정성을 검토하였다. 영향강도가 높았던 설명변수인 HACCP, 검출이력, 부적합이력으로 구성한 BN 모델을 시험용 데이터세트에 적용한 결과 부적합일 확률이 15.8%로 시험용데이터의 부적합률인 0.22%의 약 71.4배 개선할 수 있었다. 그러나 이 모델의 재현율은 0.2에 머물렀는데, 이는 특히 부적합항목인 유해물질의 기준·규격이 신설되어 해당 양식장에서 검사기록이 없는 경우와, 매우 드물게 발생하여 10년 동안 검출이력이 없어 학습데이터세트에는 없는 경우이었다. 베이지안 네트워크를 적용하여 부적합확률이 높은 생산단계 안전성 조사대상을 선정하게 되면 설명변수별로 시나리오에 따라 부적합확률을 설명가능하게 되어 다른 머신러닝 알고리즘을 적용하는 경우 지적되어온 설명불가능이라는 문제점을 해소할 수 있으며, 향후 안전성조사 데이터 축적 시 용이하게 모델 업데이트가 가능하며 이를 통해 모델의 예측성능개선도 기대할 수 있다는 장점이 있다.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2009년도 추계학술대회
• /
• pp.3-10
• /
• 2009

When the measurement method for a performance variable is destructive or expensive, it is profitable to replace the performance variable with a highly correlated surrogate variable. In this paper we propose screening procedures using a surrogate variable with specified producer's and consumer's risks. Blending the basic concepts of acceptance sampling plans and screening procedures, the proposed model can be used effectively by quality professionals. Two models are considered: the normal model with dichotomous performance and continuous surrogate variables, and the bivariate normal model with continuous performance and surrogate variables. It is assumed the surrogate variable given the performance variable is normally distributed in the normal model, and performance and surrogate variables are jointly normally distributed in the bivariate normal model. For the two models, Producer's and consumer's risks are derived, and methods of finding the optimal screening procedures are presented. Numerical examples are also given.

• 품질경영학회지
• /
• 제37권4호
• /
• pp.23-30
• /
• 2009

When the measurement method for a performance variable is destructive or expensive, it is profitable to replace the performance variable with a highly correlated surrogate variable. In this paper we propose screening procedures using a surrogate variable with specified producer's and consumer's risks. Blending the basic concepts of acceptance sampling plans and screening procedures, the proposed model can be used effectively by quality professionals. Two models are considered: the normal model with dichotomous performance and continuous surrogate variables, and the bivariate normal model with continuous performance and surrogate variables. It is assumed the surrogate variable given the performance variable is normally distributed in the normal model, and performance and surrogate variables are jointly normally distributed in the bivariate normal model. For the two models, producer's and consumer's risks are derived, and methods of finding the optimal screening procedures are presented. Numerical examples are also given.