• The Journal of the Korea Contents Association
• /
• v.18 no.7
• /
• pp.245-252
• /
• 2018

The rose bengal reagent, based on the phase transfer catalysis technique, is a calcium-targeting reagent that forms an insoluble salt that does not dissolve in a neutral or basic solution. It is expected to be effective in developing a latent fingerprint in a wet sample. However, many previous studies did not observe the fluorescence of the developed fingerprints, nor were the proposed methods of producing the reagents the optimal develop conditions. The aim of this study was to investigate the optimum reagent composition of rose bengal by varying the concentration of rose bengal dye and phase transfer catalyst based on maximum emission fluorescence of rose bengal. As a result, it was confirmed that rose bengal and surfactant concentration were the most effective when 0.01M: 0.008M, respectively.

• Macromolecular Research
• /
• v.14 no.2
• /
• pp.173-178
• /
• 2006

Poly(3-(2-hydroxyethyl)thiophene) (P3HET) was synthesized using oxidative coupling polymerization that involved the protecting and deprotecting of hydroxyl groups but not the chlorine substitution or oxidative decomposition of the hydroxyl groups. The resulting P3HET exhibited good solubility in aprotic solvents, in contrast to the insoluble polymer product synthesized directly from the monomer, 3-(2-hydroxyethyl)thiophene (3HET). P3HET had low conductivity due to the strong hydrogen bonding of its hydroxyl groups. The ester-functionalized poly(3-(2-acetoxyethyl)thiophene) and poly(3-(4-pentylbenzoateethyl)thiophene) were also prepared with reasonably high molecular weights in order to examine how this functionalization modified the physical and chemical properties of P3HET. These polymers exhibited better solubility in common solvents and higher conductivity than P3HET. All these polymers exhibited bathochromic shifts of their film state absorption maxima with respect to those found in the UV-visible spectra of their solution phases. The extent of the bathochromic shift was found to vary with the lengths of the side chains of the ester-functionalized polymers.

• Clean Technology
• /
• v.13 no.4
• /
• pp.237-243
• /
• 2007

Phase behavior of the ternary systems of water-insoluble simvastatin drug, which is well known to be effective drugs for hypercholesterolemia therapy, in solvent mixtures of dimethyl ether (DME) and supercritical carbon dioxide was investigated to present a guideline of establishing operating conditions in the particle formation of the drugs by a supercritical anti-solvent recrystallization process utilizing DME as a solvent and carbon dioxide as an anti-solvent. The solubilities of simvastatin in the mixtures of DME and carbon dioxide were determined as functions of temperature, pressure and solvent composition by measuring the cloud points of the ternary mixtures at various conditions using a high-pressure phase equilibrium apparatus equipped with a variable-volume view cell. The solubility of the drug increased as the DME composition in solution and the system pressure increases at a fixed temperature. A lower solubility of the drug was obtained at a higher temperature.

• Journal of Korea Soil Environment Society
• /
• v.2 no.2
• /
• pp.73-79
• /
• 1997

Removal of the Arsenic components from the closed mine tailings has been attempted by the alkali-leaching method. Two tailings collected from the Daduck and Yuchon mine which were already closed many years ago were leached with caustic soda solutions. The Arsenic components in the leach liquor resulted from the alkali treatment of tailings could be removed fairly well in the form of insoluble calcium-Arsenic compound by the precipitation with calcium chloride. As a result, the extraction of about 60~90% Arsenic from the tailings could be obtained depending on the leaching conditions and the influence of temperature and the slurry density on the extraction of Arsenic was also found to be very small at the NaOH concentration more than 0.5N. In addition, it seemed that a caustic soda solution over 0.5N NaOH could be used repeatedly for the leaching of tailings since the consumption of NaOH was not so great in a leaching of them. As far as the precipitation of Arsenic components was concerned, more than 99% of Arsenic could be precipitated within 10 minutes by the addition of 2wt% CaC12 in to the leach liquor.

• Journal of Photoscience
• /
• v.4 no.3
• /
• pp.147-160
• /
• 1997

INTRODUCTION : Various types of organic reactions in the crystalline state, so-called "topochemical reaction", have been reported in this century." Among the reactions, [2+2] photocycloaddition of diolefin crystals are one of the most intensively investigated examples. In the topochemical reaction in a pure sense, the space group symmetry is perfectly preserved throughout the reaction as were demonstrated by the crystalline-state photopolymerization of 2,5-distyrylpyrazine (2,5-DSP) and photodimerization of propyl $\alpha$-cyano-4-[2-(4-pyridyl) ethenyl]cinnamate. 2,5-DSP was initially prepared by Franke and in 1958 Koelsch and Gumprecht described briefly in their article of diazine-derivatives that it was found that the compound (2,5-DsP) was converted into a colorless insoluble polymer (\ulcorner) dec. 331~331$\circ$ when the solid was exposed for a few hours to ultraviolet light. Wright described in his book as if Koelsch and Gumprecht had investigated both the structure of the photoproduct and the crystal structure 2,5-DSP in detail. However, in the paper, they have not described any study on chemically correct analysis and crystallography of the resulting photoproduct at all. In 1967, one of present authors (M. H.) independently made the same observation as Franke that brilliant yellow crystal of 2,5-DSP was converted into powdery white substance under the sunlight in the course of a preparative study of pyrazine-2,5-dicarboxylic acid from 2,5-DSP. He investigated this phenomenon and concluded for the first time that a linear highmolecular-weight polymer crystal ([$\eta$] > 3.0 in $CF_3COOH$ solution) with recurring cyclobutane units in the main chain, had been produced from 2,5-DSP crystal by the action of sunlight.on of sunlight.

• Korean Journal of Agricultural Science
• /
• v.45 no.2
• /
• pp.169-176
• /
• 2018

This study evaluated the effects of Glycine soja (GS) and hairy vetch supplementation on the quality of corn silage. The feeding regimen consisted of a corn silage (Control) and a control supplemented either with 20% GS or 20% hairy vetch with four replicates. All experimental diets were stored for 40 days at room temperature ($20-25^{\circ}C$). The control had a higher (p < 0.05) dry matter level but had a lower level (p < 0.05) of crude protein, crude fat, acid detergent fiber and neutral detergent fiber than any other treatments. Hairy vetch had a higher level (p < 0.05) of acetic acid and butyric acid than any other groups but had a lower level (p < 0.05) of lactic acid than that of the control. A lower silage pH was observed (p < 0.05) in the control compared to the other treatments. The control had lower (p < 0.05) sucrose and fructose concentrations compared to the other treatments. Corn silage supplemented with hairy vetch showed a higher level (p < 0.05) of crude protein and buffer solution protein and a higher ratio of soluble protein to insoluble protein than any of the other groups. Thus, the results of the present study suggest that GS and hairy vetch supplementation of corn silage would be beneficial for maintaining quality and elevating protein levels when compared to the control.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.2 s.52
• /
• pp.125-134
• /
• 2007

This study has been carried out in order to examine the precipitation characteristics of Fe, Mn and Al ions in coal mine drainage before removing heavy metals by using the froth flotation method. The removal rate of Fe(III), Mn(II) and Al(III) within 1 h accounted for over 99% in pH 5.0, 10.0, and $6.0{\sim}9.0$ respectively, and residual concentrations of which were under $1mgL^{-1}$. When sodium oleate as a collector was added to the solution of Fe, Mn, and Al ions, insoluble salts was not formed by the reaction of heavy metal and sodium oleate. So, we must remove the metals from coal mine drainage by using not the ion flotation method, but the precipitation flotation method

• KSBB Journal
• /
• v.21 no.3
• /
• pp.199-203
• /
• 2006

Precipitation and reactive distillation were employed to recover lactic acid from fermentation broth. Lime was initially added to fermentation broth in order to convert soluble lactic acid to an insoluble calcium lactate form. Drowning-out crystallization was used to decrease the solubility of calcium lactate by adding ethanol as a co-precipitant. In the ideal solution of organic acids as well as fermentation broth, precipitation experiments were performed with varying amounts of ethanol. Precipitation process was followed by reactive distillation. Carboxylate salts formed in the previous precipitation process were mixed with carbon dioxide and triethylamine to precipitate as calcium carbonate. The remaining liquid was distilled for 1 hr at different temperatures. Triethylamine and water were recovered from the top of the distiller, while organic acids, inducing lactic acid as a main component remained in feeding bottle. The yield of recovered lactic acid was 67.5% with the purity of 99.7%.

• Journal of Environmental Science International
• /
• v.25 no.5
• /
• pp.737-744
• /
• 2016

For electrolysis process using an insoluble electrode, electrochemical performance was greatly affected by the manufacturing method and procedure, such as the firing temperature, pre-treatment, type of precursor solution, coating method, electrode material, etc. Components of the electrode therein is one of the most important factors in electrochemical reaction. To achieve such characteristics, a appropriate ratio of the electrode material should be carefully chosen. The aim of this research was to apply experimental design method in the optimization of electrode component for the maximum generation of oxidants in electrochemical oxidation process. Mixture design, especially expanded simplex lattice design, in DOME (design of mixture experiments) with Design Expert - commercial software - was used to analyze the data. Analysis of variance (ANOVA) showed a high coefficient of determination ($R^2$) value of 0.9470, thus ensuring a satisfactory adjustment of the $3^{rd}$ order special cubic regression model with the experimental data. The application of response surface methodology (RSM) yielded the following regression equation, which is an empirical relationship between the TRO generation concentration and independent variables(mol ratio of 3 electrode components) in a real unit: TRO generation concentration $(mg/L)=TRO\;conc.=98.25{\times}[Ir]+49.71{\times}[Sn]+95.29{\times}[Sb]-16.91{\times}[Ir]{\times}[Sn]-29.47{\times}[Ir]{\times}[Sb]-22.65{\times}[Sn]{\times}[Sb]+703.19{\times}[Ir]{\times}[Sn]{\times}[Sb]$. The optimized formulation of the 3 component electrode for an high TRO (total residual oxidants) generation was acquired at mol ratio of Ir 0.406, Sn 0.210, Sb 0.384 (desirability d value, 1).

• Journal of Korean Elementary Science Education
• /
• v.22 no.2
• /
• pp.138-148
• /
• 2003

This study was to analyze how elementary school science textbooks explain dissolution and to examine the patterns of elementary school teachers' conceptions on dissolution and the teaching practices on dissolution of elementary school teachers. According to the result of the textbook analysis, the textbooks based on the 7th curriculum didn't explain dissolution very differently from those based on the 6th curriculum. The contents dealing with dissolution in the textbooks of 7th curriculum became difficult gradually as the year went up, but the connected organization of the contents made students learn it easily. For example, in order to learn dissolution introduced first in the 3rd year 2nd semester textbook, students would tell soluble substance in water from insoluble substance in water as they put powdered substance in water. In the 5th year 1st semester textbook students were supposed to acquire the knowledge related to dissolution through the designed activities such as comparing solubility produced by different solvents and defining a solvent, a solute, dissolution, and a solution. In addition, teachers' guide for 5th year 1st semester textbook elucidated the principle of dissolution using attraction concept that was scientific. The result of the survey on teachers showed that 90% of elementary school teachers understood the dissolution of salt in water just as millet particles' filling the space between bean particles and they responded that they demonstrated millet particles' filling the space between been particles when they taught the dissolution of salt in water. When it comes to teachers who had the right idea on dissolution as the attraction conception, understanding was one thing and teaching was another, because they often instructed dissolution as the space conception in the real teaching.