• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.41-46
• /
• 2023

It is very important to meet the maximum detection range in a radar system. In order to meet the maximum detection Range, the sensitivity of the received signal of the radar system must be high. In addition, the dynamic range should be wide in the radar signal processing board. To meet these requirements, the signal processing board must be designed to be robust against external and internal noise. In particular, a design is required to minimize the effect of noise generated by various switching circuits inside the board on the received radar signal. In this paper, we derive the requirements of the signal processor board to meet the radar system performance and describe the design to meet the derived requirements. In addition, the EMC design to minimize the influence of noise input from the outside or generated from the inside is described. Confirm the secured performance through the test of the manufactured board.

• Journal of Environmental Health Sciences
• /
• v.46 no.4
• /
• pp.398-409
• /
• 2020

Objectives: This study aimed to evaluate environmental exposure to tobacco-specific nitrosamines (TSNAs) by conducting an analysis of the concentration of TSNAs in deposited dust collected from a fertilizer plant and the surrounding village, a simulation of high-temperature drying of tobacco waste, and CALPUFF modeling. Methods: The raw materials of the products, deposited dust (inside and outside the plant and residential area), soil, and wastewater were sampled and the TSNA concentrations were analyzed by LC-MS/MS. As the plant was closed down before the investigation, simulation tests were conducted to confirm the substances discharged during high-temperature (300℃) drying of tobacco waste. CALPUFF modeling was performed to identify the area of influence due to exposure to TSNAs. Results: TSNAs were detected in organic fertilizers estimated to contain tobacco waste, deposited dust, and soil collected from inside and outside the plant. N'-nitrosonornicotine (NNN), 4-(methylnitrosoamino)-1-(3-pyridyl)-1-butanone (NNK), and N'-nitrosoanatabine (NAT) components were detected in five of 15 deposited dust samples collected from the residential area around the plant, while TSNAs were not detected in the five sampling points in the control area. Also, the simulation test for the high temperature drying of tobacco waste found emissions of TSNAs. The CALPUFF modeling results showed that the survey area was likely to be included in the area of influence of TSNA emissions from the plant. Conclusions: It is estimated that harmful tobacco ingredients such as TSNAs were dispersed in nearby areas due to the illegal use of tobacco waste as a raw material to produce organic fertilizers at the plant. These findings assume that the residents have been exposed to TSNAs and suggest that the need for the establishment of measures to manage environmental health.

• Journal of the Korea Convergence Society
• /
• v.6 no.6
• /
• pp.231-239
• /
• 2015

This study examines the self-efficacy, job satisfaction and the desire degree of self-development according to the general characteristics of dental hygienists. It aims to contribute to the establishment of the education system considering the characteristics of organization and effectively motivates the self-development of the dental hygienists. With the collected data, frequency, percentage, One-Way ANOVA and t-test were conducted using SPSS 20.0. This study result showed that among the general characteristics, activities inside and outside of the hospital, working experience, education and the size of the hospital affect the self-efficacy, job satisfaction and the desire degree of self-development. to enhance the motivation for the self-efficacy, job satisfaction and self-development of the dental hygienists, it is necessary to establish the advanced medical environment, provide support for the activities inside and outside of the hospital, and develop the systematic education program. Also, dental hygienists need to put their greatest effort into enhancing their self-efficacy, job satisfaction and self-development.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.1974-1979
• /
• 2007

In this study, Ice slurry generator heat transfer characteristics are experimentally investigated for the ice slurry generating system with scraper which is pneumatically operated. The ice slurry generator has the same shape as the vertical double tube type heat exchanger. Refrigerant is flowing in the outside tube and ethylene glycol solution in the inside tube. Refrigerant and solution water are parallel flow type which entering bottom of generator and leaving top of generator. The experimentations are conducted under the various test conditions such as compressor speed and cooling water temperature. For the above experimental conditions, heat transfer characteristics of the ice slurry generating system are evaluated in terms of the overall heat transfer coefficient and the heat transfer rate. And the experimental results show that the heat transfer rate of the system is increased as the compressor speed increases and the cooling water temperature decreases.

• Journal of Power System Engineering
• /
• v.9 no.2
• /
• pp.73-80
• /
• 2005

Both theoretical and experimental investigations were conducted to analyze defrosting behavior of a window heater operating in the low outdoor temperature($-20^{\circ}C$). To achieve this purpose, first a warm-chamber experiment($23^{\circ}C$) was performed to measure inner and outer surface temperature of the rear window(heated by the electric heater supplying 195 W) as functions of both time and position. Secondly, a cold chamber experiment was made to continuously record defrosting process of the frosted window. From the comparisons of the two experimental results, it was found that there was a similarity between the spatial distributions of both temperature and remaining frost. Thus, the temperature data from the warm-chamber experiments can be utilized to predict an expected zone covered with remaining frosts, and this approach can also be adopted in the inspection process in order to economically guarantee optimized performance of the window heater. Finally, an analytical model based on one-dimensional, steady-state heat transfer theories was proposed and successfully predicted the outer surface temperature of the rear window surrounded by cold air($-20^{\circ}C$) for the given operating conditions(heater power, inside and outside heat transfer coefficients, and surrounding air temperature, etc.).

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.24 no.4
• /
• pp.265-276
• /
• 2017

Purpose: This study was conducted to design and implement a fundamental nursing practice based on flipped learning and to examine the effects. Methods: Participants were 57 students who were taking the fundamental nursing practice course at D university in N city. The study included processes of instructional design, action/effects and reflection. Data were analyzed using paired t-test with the SPSS/WIN 23.0. Results: In the instructional design stage, the class consisted of 3 parts: outside class (pre-learning), inside class (assessment, collaborative practice, peer review, reflection), after-class (self-directed practice, feedback). In the action/effects stage, the flipped learning was applied for 15 weeks according to the instructional design and then the effects of flipped learning were evaluated. Students showed a significant improvement in self-directed learning ability (t=-3.56, p=.001) and critical thinking disposition after the class (t=-3.72, p<.001). Finally, in the reflection stage, the researchers examined whether the four pillars of flipped learning occurred. Conclusion: Findings indicate that flipped learning applied in fundamental nursing practice is effective in improving self-directed learning ability and critical thinking disposition. The action research method was a useful way to foster professor's educational competency as well as to verify effects of a new nursing education method.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.3
• /
• pp.67-76
• /
• 2011

Column base is very important part of steel structure because it transmits load to foundation in structure. Column base which is used frame construction in the inside and outside of the country is distributed into exposed-type, concrete encased and imbeded-type. Exposed-type column base is most profitable, if consider reuse and recycle of elements first of all. In this study, we proposed a new style exposed-type column base improved in performance for construction work and mechanical performance.

• Tribology and Lubricants
• /
• v.22 no.3
• /
• pp.149-154
• /
• 2006

This paper presents the braking friction and wears on the rubbing surfaces of a friction pad-disk brake. In this study, four friction disk specimens are sampled from unused and used disks in which are taken from the disk brake system when the friction induced vibration and noise problems have been occurred during a braking period at a running period of 10,000 km, 20,000 km, and 30,000 km in random. The experimental results indicate that the tribological characteristics of an unused disk brake shows equal and stable as a friction coefficient and temperature distributions during a braking friction/wear test period including a total friction mode from the start to running periods. But the used disk brake shows unstable and uneven friction modes between an outside and inside rubbing surfaces of a disk brake in terms of a friction coefficient and wears. This may lead to a friction induced friction vibration and noise problems of a used disk brake.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.108-111
• /
• 2003

The main objective of this paper is to module design and pressure relief test a new type of polymer gapless surge arrester for power distribution line. Metal oxide surge arrester for most electric power system applications, power distribution line and electric train are now being used extensively to protect overvoltage due to lightning. Surge arresters with porcelain housing must not have explosive breakage of the housing to minimize damage to other equipment when subjected to internal high short circuit current. When breakdown of gapless elements in a surge arrester occurs due to flashover, fault short current flows through the arrester and internal pressure of the arrester rises. The pressure rise can usually be limited by fitting a pressure relief diaphragm and transferring the arc from the inside to the outside of the housing. However, there is possibility of porcelain fragmentation caused by the thermal shock, pressure rise, etc. Non-fragmenting of the housing is the most desired way to prevent damage to other equipment. The pressure change which is occurred by flashover become discharge energy. This discharge energy raises to damage arrester housing and arrester housing is dispersed as small fragment. Therefore, the pressure relief design is requested to obstruct housing dispersion.

• 한국해양학회지
• /
• v.20 no.3
• /
• pp.62-69
• /
• 1985

Comparision of the classical taxonomy and the numerical taxonomy was carried out on 108 strains isolated from Chung-mu bay and it was confirmed that correlation coefficient measured between strains represented similarities. Gram stain is the most important test in the classical taxonomy, while Gram positive and Gram negative strains were distributed evenly over the whole cluster and coccus and rod were separated in the numerical taxonomy. Both the numerical taxonomy and the classical taxonomy showed high similarity in the classification between the genera. The strains collected in bottom layer marked lower taxonomic similarity between strains than those in upper and middle strains. The distance between the inside (Group I) and the outside (Group II) strains of the bay was larger than that between the strains collected in high and low tide.