• 조명전기설비학회논문지
• /
• 제26권11호
• /
• pp.48-53
• /
• 2012

In this paper designed J-class amplifier that have high efficiency using parasitic of pHEMT. Measured results of the designed J-class amplifier is maxmum output power of 31.5dBm and gain of 16.5dB, minimum output power of 29.8dBm. when input power 15dBm. Maxmum drain efficiency is 76.2% at 2.95GHz, maxmum drain efficiency is 61%. The J-class amplifier has average gain of 15.35dB and average efficiency of 35%.

• 생태와환경
• /
• 제43권1호
• /
• pp.161-167
• /
• 2010

In this study, we implemented an experimental approach of ecological model development in order to emphasize the importance of input variable selection with respect to time-delayed arrangement between input and output variables. Time-series modeling requires relevant input variable selection for the prediction of a specific output variable (e.g. density of a species). Inadequate variable utility for input often causes increase of model construction time and low efficiency of developed model when applied to real world representation. Therefore, for future prediction, researchers have to decide number of time-delay (e.g. months, weeks or days; t-n) to predict a certain phenomenon at current time t. We prepared a total of 3,900 equation models produced by Time-Series Optimized Genetic Programming (TSOGP) algorithm, for the prediction of monthly averaged density of a potamic phytoplankton species Stephanodiscus hantzschii, considering future prediction from 0- (no future prediction) to 12-months ahead (interval by 1 month; 300 equations per each month-delay). From the investigation of model structure, input variable selectivity was obviously affected by the time-delay arrangement, and the model predictability was related with the type of input variables. From the results, we can conclude that, although Machine Learning (ML) algorithms which have popularly been used in Ecological Informatics (EI) provide high performance in future prediction of ecological entities, the efficiency of models would be lowered unless relevant input variables are selectively used.

• 한국수산과학회지
• /
• 제41권6호
• /
• pp.485-492
• /
• 2008

To propose proper vessel characteristics for sustainable fisheries in Korean waters, we analyzed the fishing capacity, scale efficiency and utilization of large pair-trawl vessels based on the database of catch, effort and vessel characteristics (gross tonnage and engine power) in 1990 by applying data envelopment analysis (DEA). The input factors were gross tonnage, horse power and days operated; whereas the output factor was expected catch by vessel characteristics. The optimal vessel types, selected based on the input-oriented technical efficiency and gross tonnages, was 100 GT with engine power <600 HP. The output-oriented unbiased estimate of capacity utilization (CD) decreased with increasing vessel tonnage. For the same tonnage vessels, the CD decreased with increasing engine power.

• 한국컴퓨터정보학회논문지
• /
• 제23권12호
• /
• pp.203-209
• /
• 2018

This study analyzed the employment efficiency of Korean colleges and universities using DEA(2015 GOMS), which was surveyed by the Ministry of Employment and Labor and the Korea Employment Information Service. The input variables were employment program participants, language educators, family economic applicants, and employment targets. As a result, the college was more efficient than the college and the college was relatively ineffective. The contribution of input and output contributed the highest efficiency with 99.9% of the participants in the employment program, and the possibility of improving the efficiency of the language educator was the highest at 70.04. Based on the results of the above research, it suggests the necessity of activation of employment programs and activation of language training in each university. Future studies will need to study the efficiency of universities nationwide.

• 산업경영시스템학회지
• /
• 제42권3호
• /
• pp.8-14
• /
• 2019

Most of the data envelopment analysis (DEA) models evaluate the relative efficiency of a decision making unit (DMU) based on the assumption that inputs in a specific period are consumed to produce the output in the same period of time. However, there may be some time lag between the consumption of input resources and the production of outputs. A few models to handle the concept of the time lag effect have been proposed. This paper suggests a new multi-period input DEA model considering the consistent time lag effects. Consistency of time lag effect means that the time delay for the same input factor or output factor are consistent throughout the periods. It is more realistic than the time lag effect for the same output or input factor can vary over the periods. The suggested model is an output-oriented model in order to adopt the consistent time lag effect. We analyze the results of the suggested model and the existing multi period input model with a sample data set from a long-term national research and development program in Korea. We show that the suggested model may have the better discrimination power than existing model while the ranking of DMUs is not different by two nonparametric tests.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.85-89
• /
• 2003

Many single-stage PFC(power-facto.-correction) ACHC converters suffer from the high link voltage at high input voltage and light load condition. In this paper, to suppress the link voltage, a novel high power factor high efficiency PFC AC/DC converter is proposed using the single controller which generates two gate signals so that one of them is used far gate signal of the flyback DC/DC converter switch and the other is applied to the Boost PFC stage. A 130w prototype for LCD monitor adapter with universal input $(90-265V_{rms})$ and 19.5V 6.7A output is implemented to verify the operational principles and performances. The experimental results show that the maximum link voltage stress is about 450V at 270Vac input voltage. Moreover, efficiency and power factor are over $84\%$ and 0.95, respectively, under the full load condition.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.85-88
• /
• 2003

In this Paper, we report the experimental results of the Forward-flyback U-U converter with current doubler and synchronous rectifier. The experimental converter, that has a output voltage 3.3V, output current 20A, maximum power of 66W, switching frequency of 290kHz and input voltage range of 36-75V, has been successfully implemented. As a result, in the entire voltage range the measured full load efficiency was above 85$\%$, and the output voltage was regulated at 3.3V within $\pm3{\%}$ tolerance.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1999년도 학술대회논문집-국제 전기방전 및 플라즈마 심포지엄 Proceedings of 1999 KIIEE Annual Conference-International Symposium of Electrical Discharge and Plasma
• /
• pp.67-70
• /
• 1999

This paper describes preliminary discussions on manufacture of a He-Ne laser and investigation of output characteristics. The He-Ne laser which is to be manufactured is what is the most common wavelength λ=632.8[nm] transition in the red portion of the spectrum. The output characteristics as various parameters, such as gas mixture ratio, gas pressure, discharge current, resonator, resonator length, and the efficiency characteristics as a input power will be investigated.

• 한국전기전자재료학회논문지
• /
• 제19권4호
• /
• pp.350-356
• /
• 2006

In this study, piezoelectric transformer was manufactured at the sintering temperature of $950^{\circ}C$, and then the feasibility of application to low temperature sintering piezoelectric transformers was investigated by evaluating the electrical characteristics of it. The voltage ratio of piezoelectric transformer showed the maximum value at the resonant frequency of input part, and increased according to the increase of load resistance. The output power and efficiency of piezoelectric transformer showed the superior properties when the output impedance of it coincides with the load resistance. Piezoelectric transformer manufactured at the low temperature of $950^{\circ}C$ showed the heat generation less than $20^{\circ}C$ at the output power of 30 W, and stable driving characteristics.

• 농촌계획
• /
• 제26권2호
• /
• pp.13-24
• /
• 2020

This study analyzed the management efficiency of local food stores that are increasing recently. The analysis targeted 25 local food outlets in Jeonbuk area, and the analysis method analyzed the efficiency by CCR model. The input variables used to analyze the input-oriented efficiency of local food stores are business expenses, employees, organizational number of participating farms, and number of items, and sales are used as output variables. The main contents of the analysis are as follows. First, local food outlets increased due to support projects such as the government, local governments, and agricultural cooperatives, but their dependence was high. Second, the management efficiency of 25 local food stores in Jeonbuk is 28.0% when the efficiency is 1.000, and 72.0% of inefficient local food stores. Third, considering the projection point and the reference group, there was room for improvement in input variables. Therefore, it was determined that improvement efforts are needed to secure the continuity of local food outlets in the future. However, this study will require review of variable selection and analysis methods for further analysis.