• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.8
• /
• pp.883-892
• /
• 1992

In order to remove the assumption of full state availability which is one of the major difficulties with the practical realization of variable structure control system (VSCS), an output feedback variable structure control scheme for multivariable systems is proposed. The proposed output feedback VSCS is composed of a switching surfaces with dynamic structure and a new output feedback control input that can be constructed by using conventional output feedback control input design methodologies. With the proposed scheme, the practical realization of VSCS for the systems with unmeasurable states and for high order systems that conventional schemes cannot be applied is possible. Simulation results show that proposed scheme is a viable method to achieve the desired control performance, for example, good transient response, robustness against process parameter variations and external disturbance without measuring all the state variables.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.1
• /
• pp.30-34
• /
• 2005

This study shows the lasing characteristics of InGaAs/InGaAsP multiple-quantum-well waveguide-type depleted optical thyristor (DOT) using the vertical window. The measured switching voltage and current are 3.36 V and 10 ㎂, respectively. The lasing threshold current is 131 mA at 25 ℃. The output peak wavelength is 1570 nm at a bias current of 1.22 Ith and there is not input signal anymore in the output port. The vertical injection depleted optical thyristor - laser diode (VIDOT-LD) using the vertical-injection structure shows very good isolation between input and output signal.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.4
• /
• pp.40-57
• /
• 1998

The dynamic feedback is well-known to be much more powerful tool compensating the ononlinearity in nonlinear control system than the static one. In this paepr we consider the input-output linearization problem via a regular dynamic feedback which is to make linear the input-dependent part of the output sufficient conditions for the existence of such a regular dynamic feedback control law, after defining the structure algorithm for a dynamic feedback.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.415.2-415.2
• /
• 2016

Triboelectric nanogenerator (TENG) is one of ways to convert mechanical energy sound, waves, wind, vibrations, and human motions to available electrical energy. The principal mechanism to generate electrical energy is based on contact electrification on material surface and electrostatic induction between electrodes. The performance of TENG are dependent on amount of the input mechanical energy and characteristics of triboelectric materials. Furthermore, the whole TENG system including mechanical structure and electrical system can effect on output performance of TENG. In this work, we investigated the effect of gear train on output performance and power conversion efficiency (PCE) of TENG under a given input energy. We applied the gear train on mechanical structure to improve the contact rate. We measured the output energy under a constant input energy by controlling the size of the working gear. We prepared gears with gear ratios (rin/rw) of 1, 1.7, and 5. Under the constant input energy, the voltage and current from our gear-based TENG system were enhanced up to the maximum of 3.6 times and 4.4 times, respectively. Also, the PCE was increased up to 7 times at input frequency of 1.5 Hz. In order to understand the effect of kinematic design on TENG system, we performed a capacitor experiment with rectification circuit that provide DC voltage and current. Under the input frequency of 4.5 Hz, we obtained a 3 times enhanced rectifying voltage at a gear ratio of 5. The measured capacitor voltage was enhanced up to about 8 fold in using our TENG system. It is attributed that our gear-based TENG system could improve simultaneously the magnitude as well as the generation time of output power, finally enhancing output energy. Therefore, our gear-based TENG system provided an effective way to enhance the PCE of TENGs operating at a given input energy.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.6
• /
• pp.157-172
• /
• 2020

This study attempts to analyze trade flows between Vietnam and China in order to understand the mutual influence of bilateral trade relations. China is a country with the world's leading economic potential. China and Vietnam are neighboring countries sharing a border of 1,281 km. Trade relations between the two countries are a necessity and, with a right policy, are beneficial to both. Vietnam has a trade deficit with China. This situation is exacerbated by the continuing rise in the gap. Vietnam trade deficit from China was USD12.5 billion in 2010, increasing to USD24 billion in 2018. Data are extracted from the 2015 national input-output tables of Vietnam and China as well as Vietnam Household Living Standard Survey statistics. The research identified 36 sectors of bilateral input-output trade between Vietnam and China. A bilateral output-input model is applied to analyze how final demand and use of input in the production of this country induces output and value added of the other country. The results show that China benefits more from Vietnam's production and consumption than Vietnam does. Vietnam's inter-sector structure does not stimulate domestic production due to the absence of supporting products as inputs in the production process.

• Journal of Korean Association for Spatial Structures
• /
• v.13 no.3
• /
• pp.91-98
• /
• 2013

A multi-input single-output (MISO) semi-active control systems were studied by many researchers. For more improved vibration control performance, a structure requires more than one control device. In this paper, multi-input multi-output (MIMO) semi-active fuzzy controller has been proposed for vibration control of seismically excited small-scale buildings. The MIMO fuzzy controller was optimized by multi-objective genetic algorithm. For numerical simulation, five-story example building structure is used and two MR dampers are employed. For comparison purpose, a clipped-optimal control strategy based on acceleration feedback is employed for controlling MR dampers to reduce structural responses due to seismic loads. Numerical simulation results show that the MIMO fuzzy control algorithm can provide superior control performance to the clipped-optimal control algorithm.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.41
• /
• pp.169-183
• /
• 2009

This study has been conducted under the background of the high rocketed international oil price in the mid of the 2008 year. Korean logistics industry then suffered from a harsh labor strike which paralyzed temporarily Korean exports and imports activities mainly due to the rising motor fuel prices. The theme of this study started from the highly practical question: what would be the impact of the soaring crude oil price on the cost structure of the Korean logistics industry? For this practical question this study conducted an input-output analysis utilizing the 2003 year benchmark input-output table, published by the Bank of Korea in 2007.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.3
• /
• pp.354-362
• /
• 2000

This paper identifies a discrete-time linear combustion model of Refuse Incineration Plant(RIP) which characterizes steam generation quantity, where the RIP is considered as a MIMO system with thirteen-inputs and one-output. The structure of RIP model is described as an ARX model which are analytically obtained from the combustion dynamics. Furthermore, using the Instrumental Variable(IV) identification algorithm, model structure and unknown parameters are identified from experimental input-output data sets, In result, it is shown that the identified ARX model well approximates the input-output combustion characteristics given by experimental data sets.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.301-305
• /
• 2005

This paper introduces a novel technique to detect and isolate the failures of multiple actuators connected to a system. Failure of actuator considered in this study could be any type of erroneous input that is different from commanded one. The interaction matrix technique allows the development of input-output equations that are only influenced by one target input. These input-output equations serve as an effective toot to monitor the integrity of each actuator regardless of the status of the other actuators. The method is capable of real-time actuator failure detection and isolation under any type of input excitation. The laboratory experiment using 8-bay NASA truss structure verifies the feasibility of the proposed method.

• Health Policy and Management
• /
• v.10 no.1
• /
• pp.126-147
• /
• 2000

This paper empirically explores the nature of the medical service industry and its various propagation effects on the economy in the input-output model, as revealed by a comparative analysis between Korea and Japan. The main findings of the paper are as follows; First, the growth of medical industry induces above-average effect on employment. Second, the industry is of the characteristics of weak both backward and forward linkage effects implying a 'final demand dependency industry'. When compared with public service sectors, however, the medical services industry shows stronger backward linkage effect than those sectors. Furthermore, it has strong repercussion effects on the goods industries. Third, in order to produce per unit of services, the medical services industry of Korea uses relatively more drugs and medical devices than that of Japan. In general, it has been shown that production structure of medical service industry in Korea is 'hardware-oriented' one; on the other hand, 'software-oriented' in Japan which means that, as intermediate inputs, outsourcing and informatization has been used than those of Korea. From the findings of the paper it could be emphasized that the medical organizations in Korea should put more efforts on shifting the current hardware-oriented production structure to strengthen core competence by enhancing productivity and by outsourcing to improve efficiency of production process. However, the medical organizations in Korea would not have enough incentives for high value-added production structure because they enjoy high operating surplus. Therefore, it would be necessary that government policy should be taken into account of these environments.