• Journal of Power Electronics
• /
• v.12 no.3
• /
• pp.439-447
• /
• 2012

In this paper, an input-series auxiliary power supply scheme is proposed, which is suitable for high input voltage and multiple-output applications. The power supply scheme is based on a two-transistor forward topology, all of the series modules have a common duty ratio, all the switches are turned on and off simultaneously, and the whole circuit has a single power transformer. It does not require an additional controller but still achieves efficient input voltage sharing (IVS) for each series module through its inherent transformer-integration strategy. The IVS process of this power supply scheme is analyzed in detail and the design considerations for the related parameters are given. Finally, a 100W multiple-output auxiliary power supply prototype is built, and the experimental results verify the feasibility of the proposed scheme and the validity of the theoretical analysis.

• Journal of Korea Water Resources Association
• /
• v.33 no.5
• /
• pp.647-658
• /
• 2000

The purpose of this study is to estimate the forward impact of water supply bottleneck using a supply-side input-output model. The failure cost analysed in this study can be used to estimate the values of the water supply reliability and can provide the bases of policy decision for the effective reallocation when water supply constraint will occur. So the position of water supply in the national economy is identified, and direct and indirect impacts are estimated by means of the interindustry analysis. Also the failure cost index is suggested to determine the prior order of water supply important in drought. By the way, the occurrence of drought having regional properties, the failure cost of the regional level using a national input-output table may be overestimated or underestimated. For the preceding reason, the failure cost estimated by a national input-output table is compared with and analysed to a regional input-output table for Kyung- Nam.g- Nam.

• Journal of electromagnetic engineering and science
• /
• v.16 no.2
• /
• pp.126-133
• /
• 2016

Wireless power transfer (WPT) efficiencies for multiple-input multiple-output (MIMO) systems are formulated with a goal of achieving their maximums using Z matrices. The maximum efficiencies for any arbitrarily given configurations are obtained using optimum loads, which can be determined numerically through adequate optimization procedures in general. For some simpler special cases (single-input single-output, single-input multiple-output, and multiple-input single-output) of the MIMO systems, the efficiencies and optimum loads to maximize them can be obtained using closed-form expressions. These closed-form solutions give us more physical insight into the given WPT problem. These efficiencies are evaluated theoretically based on the presented formulation and also verified with comparisons with circuit- and EM-simulation results. They are shown to lead to a good agreement. This work may be useful for construction of the wireless Internet of Things, especially employed with energy autonomy.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.8
• /
• pp.1997-2004
• /
• 1994

A model analysis method has been developed in the paper. The method estimates the modal parameters of multiple input-output systems, assesses their quality, and seperates structural modes form computation ones. The modal parameter extraction algorithm is the least squares method with a finite difference model relating input and output time data. The quality of the estimated system model can be assessed in narrow frequency bands by comparing the measured and model predicted responses in time domain with the aid of digital filters. Structural modes can be effectively separated from computational ones using the convergence factor which represents the pole convergence rate. The modal analysis method has been applied to simulated and experimental vibration data to evaluate its utility and limitations.

• Journal of Information Technology Services
• /
• v.17 no.3
• /
• pp.37-51
• /
• 2018

Recently, cloud computing market is growing geometrically in both private and public area, and many global companies in various domains have developed and provided cloud computing services. In such situation, Korean government made multiple plans for domestic cloud computing industry. However, most research institutes have focused on market size and status information, which makes actual effectiveness of cloud computing service hard to recognize. In this study, we define cloud computing Industry by rearranging Input-Output table published by the Bank of Korea to use Input-Output Analysis. The Input-Output Analysis was devised in 1963 by Leontief and it is used in many fields of study until now. It produces various coefficients that are able to identify production-inducing effect, value-added effect, labor-inducing effect, front and rear chain effect. The analysis results show that production-inducing effect, front and rear chain effect of cloud computing industry is low compared to other industries. However, cloud computing Industry possesses relatively high value-added effect and labor-inducing effect. It is because industry magnitude of cloud computing is smaller than other industries such as manufacturing, chemical industries. The economic effects of the cloud computing industry are not remarkable, but this result is significant to emerging markets and industries and presents the fresh way of analyzing cloud computing research field.

• Journal of Information Technology Services
• /
• v.17 no.1
• /
• pp.47-58
• /
• 2018

In this study, we define Fintech services as review previous literatures and identify the traditional Fintech service market for analysing the economic effects of the Fintech Industry by using the 2014 Input-Output Table. We can identify the current market of Fintech industry which consists of VAN, PG, financial SW, mobile banking and Fintech R&D and we conduct Input-Output analysis by using non-competitive import model. The Input-Output analysis results show that production inducement effect and front/rear chain effect of the Fintech Industry are below average of other industries. This is because the Fintech technology and industry were emerging in Korea at that time (2014), and thus the ripple effects are not significant. Especially, due to the existing white risk financial regulation, new business opportunities have not been open to adapt new ICT-financial technologies. Therefore, when the business ecosystem is build through deregulation and platforms of the financial sector, it is expected that the Fintech Industry will have a high ripple effect. In this study, we identify the current market of Fintech industry from ICT indusries and conduct Input-Output analysis. The economic effects of the Fintech industry are not remarkable, but it is significant to identify the emerging market and present the basic analysis of issued research field.

• Water for future
• /
• v.28 no.1
• /
• pp.81-90
• /
• 1995

This study attempts to develop a stochastic system model for extension and prediction of monthly runoff series in river basins where the observed runoff data are insufficient although there are long-term hydrometeorological records. For this purpose, univariate models of a seasonal ARIMA type are derived from the time series analysis of monthly runoff, monthly precipitation and monthly evaporation data with trend and periodicity. Also, a causual model of multiple input-single output relationship that take monthly precipitation and monthly evaporation as input variables-monthly runoff as output variable is built by the cross-correlation analysis of each series. The performance of the univariate model and the multiple input-output model were examined through comparisons between the historical and the generated monthly runoff series. The results reveals that the multiple input-output model leads to the improved accuracy and wide range of applicability when extension and prediction of monthly runoff series is required.

• The Journal of Fisheries Business Administration
• /
• v.46 no.1
• /
• pp.109-119
• /
• 2015

This paper is to estimate the economic effect of benefits of the R&D and recreational fishing as well as input-output analysis in the Tae-an Trial Sea Farm Project(TTSFP). We use B/C model to indicate the effects of economic valuation. B/C analyses model consists of Benefit Cost Ratio(BCR), Net Present Value(NPV) and Internal Ration of Return(IRR). Using 5.5% discounting rates and the survey data, the sub-models show economically feasible in the all of analysis and analyzed the results as follows. NPV is 42,147 million won, BCR is 3.29 and IRR is 34.30%. This study attempts to apply input-output(I-O) analysis in connecting the economic effect of TTSFP. I-O model was constructed, focusing on three effects; the production-inducing effect, the value-added-inducing effect and employment-inducing effect. There are positive effects on economic value and job creation in Tae-an and Nation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.7
• /
• pp.1127-1140
• /
• 1997

With the study for identifying the transmission characteristics of vibration and noise generated by operating engine system of a vehicle, recently many engineers have studied actively the reduction of vibration and noise inducing uncomfortableness to the passenger. In this study, output noise was analyzed by multi-dimensional spectral analysis and vector synthesis method. The multi-dimensional analysis method is very effective in case of identification of primary source, but this method has little effect on suggestion for interior noised reduction. For compensation of this, vector synthesis method was used to obtain effective method for interior noise reduction, after identifying primary source for output noise. In this paper, partial coherence function of each input was calculated to know which input was most coherent to output noise, then with simulation of changes for input magnitude and phase by vector synthesis diagram, the trends of synthesized output vector was obtained. As a result, the change of synthesized output vector could be estimated.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.05a
• /
• pp.1707-1714
• /
• 2006

In order to enhance sustainable war fighting capabilities, it is important to maintain a good ammunition support system. In this paper, we evaluate the performance of Ammunition companies using Imprecise Data Envelopment Analysis (IDEA)-BCC and IDEA-Additive model, which can deal with imprecise data in DEA. In order to select a list of input and output variables, we used a multiple regression analysis. We could choose input variables that have significant effects on the output performance with stepwise regression model. From the regression analysis, the number of soldiers, officers, and ammunition warehouses were selected as the input variables. Seven out of sixteen Ammunition companies were found to be inefficient by the IDEA-BCC model. And using IDEA-Additive model, we could identify the input excess and the output shortfall in reaching at a point on the efficiency frontier.