• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.826-833
• /
• 2010

Electric-thermal-structural actuated compliant mechanisms are mechanisms onto which electric voltage drop is applied as input instead of force. This mechanism is based on thermal expansion of material while being heated. Compliant mechanisms are designed subjected to electric charge input using BESO(bi-directional evolutionary structural optimization) method. Reliability-based topology optimization (RBTO) is applied to the topology design of actuators. performance measure approach (PMA), which has probabilistic constraints that are formulated in terms of the reliability index, is adopted to evaluate the probabilistic constraints. In this study, BESO method is used to obtain optimal topology of compliant mechanisms from initial design domain. PMA approach is used to evaluate reliability index. The procedure has been tested in numerical applications and compared with the results obtained by other methods to validate these approaches.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2061-2068
• /
• 2016

A Bloom filter is a space-efficient data structure popularly applied in many network algorithms. This paper proposes a vectored Bloom filter to provide a high-speed Internet protocol (IP) address lookup. While each hash index for a Bloom filter indicates one bit, which is used to identify the membership of the input, each index of the proposed vectored Bloom filter indicates a vector which is used to represent the membership and the output port for the input. Hence the proposed Bloom filter can complete the IP address lookup without accessing an off-chip hash table for most cases. Simulation results show that with a reasonable sized Bloom filter that can be stored using an on-chip memory, an IP address lookup can be performed with less than 0.0003 off-chip accesses on average in our proposed architecture.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1733-1740
• /
• 2004

In the transverse flux linear induction motor(TFLIM) with the general secondary composed of conductor and back-yoke, there exists a magnetized force into the normal direction or the air-gap direction of the thrust motion as well as the thrust force. Therefore, the various methodologies have been tried to use the normal force by the two independent control variables of the multi-phase input. But, as the force depends inevitably and strongly on the thrust force, it is essential to decouple both forces for two control index. In this paper, we suggest a novel approach capable of compensating the couple between both forces and the control index by using the DC-biased multi-phase input, and then realizing the independent control of TFLIM.

• Structural Engineering and Mechanics
• /
• 제53권5호
• /
• pp.957-979
• /
• 2015

The present paper investigates the influence of the orientation of the ground-motion reference axes, the seismic incident angle and the seismic intensity level on the inelastic response of asymmetric reinforced concrete buildings. A single storey asymmetric building is analyzed by nonlinear dynamic analyses under twenty bi-directional ground motions. The analyses are performed for many angles of incidence and four seismic intensity levels. Moreover three different pairs of the horizontal accelerograms corresponding to the input seismic motion are considered: a) the recorded accelerograms, b) the corresponding uncorrelated accelerograms, and c) the completely correlated accelerograms. The nonlinear response is evaluated by the overall structural damage index. The results of this study demonstrate that the inelastic seismic response depends on the orientation of the ground-motion reference axes, since the three individual pairs of accelerograms corresponding to the same ground motion (recorded, uncorrelated and completely correlated) can cause different structural damage level for the same incident angle. Furthermore, the use of the recorded accelerograms as seismic input does not always lead to the critical case of study. It is also shown that there is not a particular seismic incident angle or range of angles that leads to the maximum values of damage index regardless of the seismic intensity level or the ground-motion reference axes.

• The Journal of Korean Physical Therapy
• /
• 제22권4호
• /
• pp.97-101
• /
• 2010

Purpose: Sensory input is very important for proper performance of human. Two-point discrimination is the most widely used tactile sensory test. The purpose of this study was to find the changes in cortical activation patterns between tactile stimulation and two-point discrimination. Methods: Two healthy subjects participated in our study. fMRI scanning was done during 4 repeated blocks of tactile stimulation and two point discrimination of the right index finger tip. In one block, stimuli were repeated 10 times every three seconds. To determine the changes of cortical neurons during sensory input, intensity index was analyzed. Results: When tactile stimulation of the right index finger tip was completed, only contralateral primary somatosensory area was activated. In contrast, during two-point discrimination, both the primary somatosensory area and ipsilateral supplementary sensory area were activated. Conclusion: During two point discrimination, both primary somatosensory area and ipsilateral supplementary sensory area were activated. Therefore, two-point discrimination is required more complex and conscious activity than tactile stimulation.

• 한국소음진동공학회논문집
• /
• 제14권11호
• /
• pp.1195-1202
• /
• 2004

The international competition in refrigerator markets has continuously required the research for sound quality of a refrigerator to improve the quality of a life. In this paper, A new method for evaluation of the sound quality of a refrigerator is developed based on human sensibility engineering by using ANN(artificial neural network). In this paper, the loudness and the sharpness of the refrigerator's signals was used for the input value in ANN's training process because the loudness and the sharpness has a good correlation between the output of the ANN and the target of the individual evaluation In the training process. Two input factor was used repeatedly in the training process to get more optimum weighting value. And then finally we developed the sound quality index of a refrigerator. The developed sound quality index was confirmed by the 96.5 % of correlation between the output of the ANN and the real evaluation. It will be applied to evaluate the sound quality of a refrigerator in the industry.

• Smart Structures and Systems
• /
• 제15권1호
• /
• pp.227-244
• /
• 2015

This study develops a two stage procedure to identify the structural damage based on the optimized artificial neural networks. Initially, the modal strain energy index (MSEI) is established to extract the damaged elements and to reduce the computational time. Then the genetic algorithm (GA) and artificial neural networks (ANNs) are combined to detect the damage severity. The input of the network is modal strain energy index and the output is the flexural stiffness of the beam elements. The principal component analysis (PCA) is utilized to reduce the input variants of the neural network. By using the genetic algorithm to optimize the parameters, the ANNs can significantly improve the accuracy and convergence of the damage identification. The influence of noise on damage identification results is also studied. The simulation and experiment on beam structures shows that the adaptive parameter selection neural network can identify the damage location and severity of beam structures with high accuracy.

• 동아시아경상학회지
• /
• 제9권2호
• /
• pp.1-10
• /
• 2021

Purpose - The purpose of this study is to measure the efficiency of social security expenditure in 31 provinces, cities and autonomous regions in China and proposes corresponding improvement plans. Research design, data, and methodology - The data were obtained from the statistical yearbook of each province. The BCC and CCR models of DEA model and Malmquist index are used to analyze the efficiency, and the input-output index is expanded. Result - The results show that the social security performance of the Chinese government has improved on the whole despite the unbalanced development in different regions. Each region should look for strategies to improve the efficiency of social security according to its own problems. The study suggests that provinces affected by TCI should improve their internal environment, such as raising social security fund structure and strengthening fund supervision, to improve efficiency. Areas affected by TECI need to be more responsive to policy, socio-economic and technological development. Conclusion - The research conclusion can provide reference for Chinese provinces to improve the efficiency of social security expenditure in the future. This study is not comprehensive enough in the selection of input-output indicators, which can be further expanded in the future.

• 자원ㆍ환경경제연구
• /
• 제9권3호
• /
• pp.489-513
• /
• 2000

This paper introduces a new method to estimate and decompose sources of carbon dioxide emissions using an input-output model with decomposition method free of residual usually associated with this kind of analysis. This method is different from others, using what we call 'mean rate-of-change index (MRCI)' for weights of the decomposed terms. Ang et al.(1998) asserted that logarithmic mean divisia index(LMDI) is superior to Laspeyres index(LI) or simple average divisia index(SADI) since it reduces residual to zero. We claim that our method is an improvement over the other methods because it enables residual free decomposition even when data contain negative values, the case which LMDI cannot handle. We demonstrate by way of showing some examples that our method is superior to LI, SADI(Proops, 1993 and Chung, 1998) or LMDI(Ang et al., 1998).

• 정보처리학회논문지D
• /
• 제11D권3호
• /
• pp.495-508
• /
• 2004

최근 내용 기반 음악 정보 검색 시스템에서는 사용자의 응답 시간을 단축시키기 위해 음악의 대표성을 갖는 선율을 추출하여 색인하고, 검색시 이를 이용한다 음악에서 대표성을 갖는 선율은 해당 음악을 대표하여 사용자가 기억하고 있으며, 사용자가 질의 선율로 사용할 가능성이 높아야 한다. 그러나, 기존의 내용 기반 음악 정보 검색 시스템에서는 음악 구성 형식을 고려하지 않기 때문에 음악 구성 형식에 따라 반복, 대조되는 선율들을 해당 음악을 대표하는 선율로 추출하지 못한다. 본 논문에서는 해당 음악을 대표하는 선율을 추출하기 위하여 한 음악에서 음악 구성 형식을 반영하여 일정한 유사도내에서 반복되는 선율들을 해당 음악의 반복 주제 선율로 추출한다. 또한, 사용자가 일반적으로 인지하는 첫 동기 선율과 절정 선율에 해당되는 선율들을 인식하여 대표 선율에 추가한다. 본 논문에서 제안된 시스템의 성능을 평가하기 위해 프로토타입을 구현하고, 다른 선을 색인과 비교 실험하였다. 실험 결과, 대표 선율 색인은 전체 동기를 색인한 경우에 비해 34％의 적은 저장 공간으로 색인을 구성하여 사용자의 응답 시간을 단축시켰다. 또한, 반복 주제 선율만으로 색인한 경우에 비해 사용자가 질의 가능성이 높은 첫 동기 선율, 절정 선율 등을 대표 선율로 색인하기 때문에 추가적으로 20의 색인 공간이 필요하였으나, 다양한 사용자의 질의 선율에 대해 검색의 정확성을 증진할 수 있음을 보였다.