• 전기의세계
• /
• 제31권5호
• /
• pp.361-367
• /
• 1982

The problem of parameter identification for multivariable stochastic linear systems from output measurements, which are corrupted by noises, is considered. A modified Luenberger's input/output canonical form is used for reducing the number of unknown coefficients. A computationally and conceptionally simple systematic procedure for parameter estimation is obtained using output correlation method. The estimates are shown to be asymptotically normal, unbiased and consistent. Numerical examples are presented to illustrate the identification method.

• 한국음향학회지
• /
• 제22권6호
• /
• pp.457-462
• /
• 2003

본 논문에서는 GMM (Gaussian Mixture Model)에 기반한 문맥독립 화자식별 시스템의 식별성능 향상과 실시간 처리를 위한 계산량 감소를 위하여 화자 프루닝 (Speaker Pruning) 방법을 제안한다. 기존의 화자식별 방법인 최대유사도(Maximum Likelihood) 방법과 가중모델순위 (Weighting Model Rank) 방법, 수정된 가중모델순위 (Modified WMR) 방법 등은 입력 음성 전체와 모든 화자모델들과의 유사도를 프레임 단위로 계산하여 가장 큰 누적 유사도를 가지는 화자를 식별화자로 결정하는 방법으로써, 입력 프레임 및 등록 화자수가 늘어남에 따라 계산량 및 식별시간이 늘어나는 단점이 있었다. 이러한 단점을 해결하기 위하여, 제안방법은 입력음성 프레임의 일부분만을 이용하여 화자모델들과의 프레임 유사도를 계산한 후 계산된 유사도를 이용하여 등록화자의 상위 일부분의 화자만을 선택하고, 선택된 화자들에서만 유사도 계산을 수행함으로서 계산량 및 식별시간을 줄이는 방법이다. 또한, 화자 프루닝을 적용할 경우 화자수가 가변 되더라도 수정된 가중모델 순위방법을 적용할 수 있어 식별성능을 높일 수 있다. 식별실험결과, 제안방법을 적용한 경우 기존의 최대 유사도 방법이나 가중모델순위 방법보다 최대 65%의 계산량 및 식별시간을 감소시킬 수 있었으며, 약 2%의 향상된 식별결과를 나타내어, 본 논문에서 제안한 방법의 유효성을 확인할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.635-640
• /
• 2001

This paper introduces a frequency-domain method of structural damage identification. It is formulated in a general form from the dynamic stiffness equation of motion for a structure and then applied to a beam structure. The appealing features of the present damage identification method are: (1) it requires only the frequency response functions experimentally measured from damaged structure as the input data, and (2) it can locate and quantify many local damages at the same time. The feasibility of the present damage identification method is tested through some numerically simulated damage identification analyses and then experimental verification is conducted for a cantilevered beam with damage caused by introducing three slots.

• 대한조선학회논문집
• /
• 제43권1호
• /
• pp.50-58
• /
• 2006

Free running model tests gives us only maneuvering indices not hydrodynamic derivatives. For this reason, system identification method has been applied to the measured data to identify mathematical model describing hydrodynamic force. However It is difficult to obtain complete set of maneuvering derivatives because of strong correlation of sway velocity and yaw rate. Therefore, in this paper, we assumed that sway velocity related coefficients would be obtained by oblique towing test. and then proposed new procedure to estimate yaw related coefficients. To do this, correlation and regression analyses were carried out to establish modified model and estimate maneuvering derivatives. Also D-optimal rudder input scenario was found based on the modified model and confirmed the validity of its sufficient richness as a input scenario.

• 한국정보통신학회논문지
• /
• 제23권5호
• /
• pp.622-629
• /
• 2019

가상현실 속에서 실제와 같은 서비스를 제공하는 기술 VR(Virtual Reality)은 Head Mounted Display(HMD) 기기를 이용하여 실제와 유사한 체험을 제공한다. 최근 VR의 시장은 커졌으나 가상현실에서의 보안에 대한 연구는 다른 분야에 비해 미흡하다. 현재 VR을 활용한 많은 개인화된 서비스들이 진행되고 있는 만큼 안전한 사용자 인증이 중요하다. VR의 HMD 기기를 착용을 하면 주변 환경을 인식하지 못하기에 Personal Identification Number(PIN)입력 시에 Shoulder Surfing Attack (SSA)으로 사용자의 입력 패턴을 분석이 용이하다. 본 논문에서는 사용자의 편의성은 그대로 유지하면서 해커가 입력 패턴을 분석하더라도 사용자의 비밀 번호를 안전하게 보호할 수 있는 방법에 대해 제안한다. VR 특성에 맞게 기존 직사각형 모양에서 벗어난 새로운 형태의 가상 키패드와 사용자와 직관적인 상호작용을 위해 자물쇠 오브젝트를 최초로 구현 하였다. 또한 VR의 기존 입력 장치들과 동일한 센서를 사용하는 스마트 글러브와 이에 적합한 회전방식의 PIN입력 방식을 구현하였다. 따라서 총 세 가지의 VR 상에서의 안전한 PIN 입력 방법에 대하여 제안하며 실험을 통해 SSA에 대한 안전성을 검증하였다.

• Journal of Electrical Engineering and Technology
• /
• 제6권6호
• /
• pp.853-866
• /
• 2011

We propose a multi-objective space search algorithm (MSSA) and introduce the identification of fuzzy inference systems based on the MSSA and information granulation (IG). The MSSA is a multi-objective optimization algorithm whose search method is associated with the analysis of the solution space. The multi-objective mechanism of MSSA is realized using a non-dominated sorting-based multi-objective strategy. In the identification of the fuzzy inference system, the MSSA is exploited to carry out parametric optimization of the fuzzy model and to achieve its structural optimization. The granulation of information is attained using the C-Means clustering algorithm. The overall optimization of fuzzy inference systems comes in the form of two identification mechanisms: structure identification (such as the number of input variables to be used, a specific subset of input variables, the number of membership functions, and the polynomial type) and parameter identification (viz. the apexes of membership function). The structure identification is developed by the MSSA and C-Means, whereas the parameter identification is realized via the MSSA and least squares method. The evaluation of the performance of the proposed model was conducted using three representative numerical examples such as gas furnace, NOx emission process data, and Mackey-Glass time series. The proposed model was also compared with the quality of some "conventional" fuzzy models encountered in the literature.

• 전자공학회논문지T
• /
• 제35T권3호
• /
• pp.25-30
• /
• 1998

본 논문에서는 미지의 디지털 변조신호가 입력되는 경우에 변조방식을 식별하는 방법을 제안한다. 제안하는 식별 방법은 입력신호의 순시진폭, 순시주파수, 순시 위상을 구하고, 이를 바탕으로 특징벡터를 추출하여 신경망을 이용하여 식별하도록 구성하였다. 식별방법의 타당성을 검증하기 위해 백색 가우스성 잡음환경 하에서 8가지 입력신호를 사용하여 SNR을 변화시켜가며 모의실험을 수행하였다. 모의실험 결과 신경망을 이용하여 SNR 10 [㏈]까지 모든 입력 신호들을 식별해 낼 수 있었다.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권2호
• /
• pp.109-113
• /
• 2002

Van de Vusse reactor is known as a highly nonlinear chemical process and has been considered by a number of researchers as a benchmark problem for nonlinear chemical process. Various identification methods for nonlinear system are also verified by applying these methods to Van de Vusse reactor. From the point of view of identification, only the Volterra kernel of second order has been obtained until now. In this paper, the authors show that Volterra kernels of nonlinear Van de Vusse reactor of up to 3rd order are obtained by use of M-sequence correlation method. A pseudo-random M-sequence is applied to Van de Vusse reactor as an input and its output is measured. Taking the crosscorrelation function between the input and the output, we obtain up to 3rd order Volterra kernels, which is the highest order Volterra kernel obtained until now for Van de Vusse reactor. Computer simulations show that when Van de Vusse chemical process is identified by use of up to 3rd order Volterra kernels, a good agreement is observed between the calculated output and the actual output.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2885-2887
• /
• 2005

We introduce a hybrid identification of information granulation(IG)-based fuzzy model to carry out the model identification of complex and nonlinear systems. To optimally design the IG-based fuzzy model we exploit a hybrid identification through genetic alrogithms(GAs) and Hard C-Means (HCM) clustering. An initial structure of fuzzy model is identified by determining the number of input, the seleced input variables, the number of membership function, and the conclusion inference type by means of GAs. Granulation of information data with the aid of HCM clustering help determine the initial paramters of fuzzy model such as the initial apexes of the membership functions and the initial values of polyminial functions being used in the premise and consequence part of the fuzzy rules. And the inital parameters are tuned effectively with the aid of the GAs and the least square method. Numerical example is included to evaluate the performance of the proposed model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2522-2524
• /
• 2005

We need build a mathematical to apply the system theory to real system, phenomenon analysis, prediction, control, simulation and so on. Especially system identification is building a model from input and output data. This study shows q-Markov Cover based system identification. When we do this, in order to make the identification possible under more general conditions with estimation of the system order, Markov parameters and covariance parameters from input and douput data, 1 suggest the way we can get an optimal model by estimating and Identifying of covariance matrix of observation noises repeatedly.