• 방송공학회논문지
• /
• 제15권3호
• /
• pp.346-354
• /
• 2010

지상파 DMB에서는 양방�� 데이터 서비스를 위하여 MPEG-4 BIFS 규격을 사용하고 있다. BIFS는 콘텐츠의 장면을 구성하는 AV, 이미지, 그래픽, 텍스트 등의 다양한 멀티미디어 객체를 장면상에 표현하고, 사용자로부터 입력을 받아 표현된 객체를 조작하도록 하는 것이 가능하다. 그러나 BIFS가 다양한 형태의 입력장치를 갖는 멀티미디어 시스템에 부합되도록 설계되었지만, 오늘날과 같이 제한적 입력장치를 갖는 휴대 단말에 대한 고려가 결여되어 있다. 문제는 DMB 단말들이 제한적 입력을 가질 수밖에 없기 때문에 사용자가 양방향 데이터 콘텐츠를 조작하는 방법이 일관적이지 못하다는 것이다. 본 논문에서는 이러한 문제를 해결하기 위하여 콘텐츠 제공자와 사용자간의 통일되고 효율적인 콘텐츠 조작을 위해 현재의 BIFS 규격에 KeyNavigator 노드를 추가로 정의하였다. KeyNavigator 노드는 BIFS 콘텐츠에서 휴대 단말의 방향키를 이용하여 BIFS 객체간의 이동이나 BIFS 객체를 선택하는 방법을 제공한다. KeyNavigator 노드를 사용함으로써 BIFS 콘텐츠 제공자는 의도하는 바에 따라 콘텐츠를 저작할 수 있고 휴대 단말 사용자에게도 통일되고 효율적인 BIFS 콘텐츠 제어 방법을 제시하는 우수한 효과가 있다.

• 한국정보통신학회논문지
• /
• 제26권9호
• /
• pp.1279-1292
• /
• 2022

신체적 불편함으로 인해 기존의 마우스와 같은 입력 장치의 사용이 힘든 사용자에게 도움이 될 수 있는 시스템으로 얼굴 인식과 Pyautogui 마우스 제어 기반의 비접촉식 입력 기법을 제안한다. 본 연구는 특히 화면 확대/축소나 스크롤 기능과 같이 웹 서핑을 보다 편리하게 돕는 기능이 포함되어 있으며, 개인의 신체적 차이 및 웹 사용 습관을 고려해 여러 설정값을 조정할 수 있도록 하였다. 또한, 기존의 시스템에서 한계점으로 제시되었던 눈 피로도에 대한 문제도 해결하였다. 추가로 고성능 CPU나 GPU 환경이 요구되지 않고 별도의 트래커 장치나 고성능 카메라 또한 필요하지 않다. 이러한 연구를 통해 손을 쓰기 어려운 장애인 및 노인들의 웹 접근성을 높여 배리어프리 실현에 기여하고자 한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.654-657
• /
• 2002

This paper introduces the design and implementation of 40-㎓-band low noise amplifier (LNA) with ultra low gain flatness for wide-band wireless multimedia and satellite communication systems. The 40-㎓-band 4-stage LNA MMIC (Monolithic Microwave Integrated Circuit) demonstrates a small signal gain of more than 20 ㏈, an input return loss of 10.3 ㏈, and an output return loss of 16.3 ㏈ for 37$\square$42 ㎓. The gain flatness of the 40-㎓-band 4-stage LNA MMIC was 0.1 ㏈ for 37$\square$42 ㎓. The noise figure of the 40 ㎓-band LNA was simulated to be less than 2.7 dB for 37~42 ㎓. The chip size of the 4-stage LNA MMIC was 3.7${\times}$1.7 $\textrm{mm}^2$.

• 대한의용생체공학회:의공학회지
• /
• 제29권2호
• /
• pp.164-171
• /
• 2008

Recently, many of hospitals have hurried to computerize the resulting data from medical devices, in order to introduce Electric Medical Record(EMR). In terms of the linkage between medical devices and hospital information systems, however, many difficulties have arisen due to some reasons such as the variety of prescription input, the format difference of the resulting data sheet, and the interface difference between medical devices from different companies. To solve these problems, many researches on standardization of the resulting data of medical devices have been performed. In this study, the linkage between hospital information systems and resulting datum in Electrocardiogram(ECG) generating biosignal waveform was tested by applying Medical waveform Format Encoding Rules(MFER) Version 1.02, which has more advantages than existing global standard. MFER viewer, in addition, was made to display the resulting data on a screen. The MFER viewer was tested and compared to the existing Scalable Vector Graphics (SVG) Viewer. The results showed that this method is more effective in the interface the data storage and application, because of simplicity and easiness in data applications. And the results show that the MFER is convenience and effective for physician. It is considered that the role of MFER as the interface in biosignal waveform including Electrocardiogram medical devices would expand in the near future.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권4호
• /
• pp.221-225
• /
• 2014

Low power RF devices, such as RFID and Zigbee, are important for ubiquitous sensing. These devices, however, are powered by portable energy sources, such as batteries, which limits their use. To mitigate this problem, this study developed RF energy harvesting with W-CDMA for a low power RF device. Diodes are required with a low turn on voltage because the diode threshold is larger than the received peak voltage of the rectifying antenna (rectenna). Therefore, a Schottky diode HSMS-286 was used. A prototype of RF energy harvesting device showed the maximum gain of 5.8dBi for the W-CDMA signal. The 16 patch antennas were manufactured with a 10 dielectric constant PTFT board. In low power RF devices, the transmitter requires a step-up voltage of 2.5~5V with up to 35 mA. To meet this requirement, the Texas Instruments TPS61220 was used as a low input voltage step-up converter. From the evaluated result, the achievable incident power of the rectenna at 926mV to operate Zigbee can be obtained within a distance of 12m.

• 한국학교ㆍ지역보건교육학회지
• /
• 제24권3호
• /
• pp.51-63
• /
• 2023

Objectives: This study aims to examine factors affecting depression of Older Adults by using the data of the elderly survey conducted by the Korea Institute of Health and Social Affairs in 2020. Methods: The total sample was 4,777 people aged over 65 years old. In this study, sociodemographic variables, information devices'use behavior and discomfort variables were input to examine the effect on depression. The data was analyzed with t²-test, ANOVA and hierarchical regression by SPSS statistic program. Results: First, use behavior and discomfort of information devices and depression were significantly different by sociodemographic variables(sex, age, level of education, marital status). Secondly, regression analysis showed that age and level of education affected an influence on depression in Model 1, which analyzed only sociodemographic variables. However, Model 2, which analyzed devices' use behavior and discomfort variables at the same time, showed that they affected depression. Conclusions: It was suggested to develop customized health education and mental health promotion were needed to reduce depression in the elderly.

• KIEE International Transactions on Power Engineering
• /
• 제3A권3호
• /
• pp.139-147
• /
• 2003

The paper presents a novel approach of constructing the state matrix of the multi-machine power system for SSR (subsynchronous resonance) analysis using the linearized equations of individual devices including electrical transmission network dynamics. The machine models in the local d-q reference frame are integrated with the network models in the common R-I reference frame by simply transforming their output equations into the R-I frame where the transformed output is used as the input to the network dynamics or vice versa. The salient feature of the formulation is that it allows for modular construction of various component models without rearranging the overall state space formulation. This universal SSR small signal stability program provides a flexible tool for systematic analyses of SSR small-signal stability impacts of both conventional devices such as generation systems and novel devices such as power electronic apparatus and their controllers. The paper also presents its application results to IEEE benchmark models.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.54-59
• /
• 1994

In this study, a high-speed servo valve with no outer leakage is developed, which is used to drive flexible hydraulic actuators (FHA) for extreme environments. In the valve, multilayered PZT devices are used to drive a spool directly and quickly. A bellows is also used to prevent outer leak from the clearance between the spool and the sleeve. Employing a disturbance observer, the lack of the system damping of the valve is improved by feeding back the estimated velocity of the spool, as well as the estimated disturbance is fed back to eliminate effectively the hysteresis between input voltage and output displacement of the PZT devices.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.252-258
• /
• 1995

The purpose of this study is to provide the integrated process control system, utilizing neural network modeling, to search for the appropriate choice input, and to keep the process output within the desired rang in the real etch process.

• 컴퓨터교육학회논문지
• /
• 제14권2호
• /
• pp.95-102
• /
• 2011

본 논문에서는 AAM의 영상처리기법을 통하여 학교 현장에서 아동들의 얼굴을 검출 추적하고, 얼굴 움직임의 특징점으로 구성된 입력벡터를 측정할 수 있는 측정도구를 제안한다. 제안된 측정도구를 이용하여 ADHD 아동의 행동패턴을 분류하였으며 이를 기반으로 하여 ADHD 아동을 판별하는 실험에 적용시켜보았다. 실험 결과 기존의 ADHD 아동 판별법인 교사와 부모의 주관적 관찰 및 면담을 이용한 방법에 비하여 객관적이고 정량적인 데이터 획득이 가능함을 확인하였으며, 시간적 공간적 제약없이 학교 현장의 보건실 및 상담실에서 검사가 가능한 장점을 지닌 방법이 될 수 있음을 확인하였다.