• 한국CDE학회논문집
• /
• 제16권3호
• /
• pp.227-235
• /
• 2011

Ship handling simulator should have capabilities of calculating ship motions (heave, pitch, and roll) at given sea state and displaying the calculated motions through a real-time 3D visualization system. Motion solver of a ship handling simulator generally calculates those motions in addition to position for an own ship, a main simulation target, but provides only position information for traffic ships. Therefore, it is required to simulate real-time traffic ship and buoy motions coupled with ocean waves in a ship handling simulator for the realistic visualization. In the paper, the authors propose a simple dynamics model by which ship and buoy motions are calculated with the input data of wave height and discuss a method for the implementation of a ship and buoy motions calculation module.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권4호
• /
• pp.196-202
• /
• 2006

This paper presents a new magneto-thermal finite element analysis for predicting the temperature rise of the EHV GIS busbar. Joule's heat due to current flowing in the main conductor and the heat due to the induced eddy current in the tank are calculated by the magnetic field analysis. And these heats are used as the input data to predict the temperature rise for the thermal analysis. However, it is not easy to apply the heat-transfer coefficients on the boundaries for the thermal analysis. In this paper, the heat-transfer coefficients on the boundaries are analytically calculated by applying the Nusselt number considering material constant and model geometry for the natural convection. The temperature distribution in the busbar by coupled magneto-thermal finite element analysis shows good agreement with the experimental data.

• 전자공학회논문지A
• /
• 제31A권5호
• /
• pp.68-75
• /
• 1994

A new Predistortor that is designed using Feedforward type is proposed to overcome the nonlinearity of HPA (High Power Amplifier). HPA has the nonlinearity of the gain compression and phase distorton, so digital communication system of multi-carrier TDMA needs the linear RF transmitter. Using IMD (Intermodulation Distortion) of drive amplifier, as Feedforward type, the inverse IMD is coupled to the main loop with variable attenuators, phase shifters, and sub-amplifiers well designed. At the input of main amplifier, the over-coupled IMD surpresses the main amplifier 's IMD. Adjusting the level and phase of IMD at the sub loop, C/I of HPA is better than before correction.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1513-1520
• /
• 2000

Complex modal testing method for rotating disks with support motion is introduced which handles the pairs of two point excitation and responses of the disk as complex input and output, respectively. This method utilizes the directivity information and the separation over the rotational speed of forward and backward traveling wave modes or bending coupled modes in the directional frequency response functions(dFRFs). This method synthesizes the normal/reverse dFRFs and complex wave dFRF, which were originally applied to rotating shaft and rotating disk, respectively, and is applied to complex system with dynamically coupled rotating disks and shaft. Experiments with a commercial hard disk drive spindle system demonstrate the validity of this method.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.199-208
• /
• 2003

Continuously variable transmission (CVT) mechanisms considered here combine the functions of a K-H-V type differential gear unit and a V-belt type continuously variable unit (CVU). As combining the functions of a K-H-V type differential gear unit and a V-belt type CVU, 24 different mechanisms are presented. Some useful theoretical formula related to speed ratio, power flow and efficiency are derived and analyzed. These mechanisms have many advantages which are the decrease of CVT size, the increase of overall efficiency, the extension of speed ratio range, and the generation of geared neutral.

• 디지털콘텐츠학회 논문지
• /
• 제10권3호
• /
• pp.389-393
• /
• 2009

본 논문에서는 유한차분 시간영역법(Finite Difference Time Domain method)을 이용하여 단일 패치를 갖는 마이크로스트립 안테나와 2개의 패치를 갖는 광대역 갭 결합 마이크로스트립 패치안테나를 설계 및 해석하였다. 반사파를 최소로 하기 위해 Mur의 2차 흡수경계조건을 적용하였다. 이 안테나의 구동패치의 길이와 폭, 기생패치의 길이와 폭, 구동패치와 기생패치의 간격 등에 의한 반사손실, 전압정재파비, 입력 임피던스 등의 주파수 응답 특성을 해석하여 최적의 광대역 안테나의 설계치를 보여 주었고 이로부터 복사패턴을 제시하였다. 또한 광대역 안테나 특성이 일어나는 원인을 분석하였다.

• Journal of the Optical Society of Korea
• /
• 제18권2호
• /
• pp.180-183
• /
• 2014

The surface of semiconductor solar cells, such as a-Si or CIGS (CuInGaSe) solar cells is not flat but textured in the microscopic domain. With textured surfaces, the optical reflectivity of a solar cell is different from that of flat surfaces in the wavelength region. In this paper, the effects of a textured surface on a CIGS solar cell are presented by RCWA (Rigorous Coupled Wave Analysis) method. The effect of incoherent light is also considered by RCWA with a Fourier analysis while conventional optical simulation uses the input light on the solar cell as coherent light. Using experimental results, the author showed that the RCWA method with a Fourier analysis is a proper method to simulate the optical properties of CIGS solar cells.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.460-462
• /
• 1998

In this study, we deal with a multivariable system which its input and output are coupled. This study presents a method for designing a controller which allows a coupled system to be transformed to a decoupled system in a standard model adopting 2DOF controller. And Wiener-Hopf($H_2$) approach is used so that the designed controller can minimize given cost function.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.78-85
• /
• 2015

This paper presents a new structure of single-stage flyback power factor correction (PFC) converter with a controllable coupled negative magnetic feedback (NMF) winding. NMF winding is used to reduce the bulk capacitor voltage at high line voltages and light loads. However, it would cause line current distortion at zero crossing condition. In the proposed circuit, a series winding is used with NMF inductor to eliminate the NMF inductor at low line voltages. As a result, the dead angle of the input current, near zero voltage crossing, is eliminated and the power factor is increased. The presented experimental results of the proposed PFC converter confirm the integrity of the new idea and the theoretical analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1695-1697
• /
• 2003

In this paper the emission properties of electrodeless fluorescent lamp were discussed using the inductively coupled plasma. To transmit the electromagnetic energy into the chamber a RF power of 13.56MHz was appied to the antenna and considering the Ar gas pressure and the RF electric power change, the emission spectrum, Ar-I line, luminance were investigated. At this time the input parameter for ICP RF plasma, Ar gas pressure and RF power were applied in the range of 10${\sim}$60m Torr, 10${\sim}$300W respectively.