• Journal of Mechanical Science and Technology
• /
• 제14권4호
• /
• pp.393-400
• /
• 2000

In this paper, a new algorithm for noninteracting control system design is proposed and applied to ship propulsion system control. For example, if a ship diesel engine is operated by consolidated control with controllable pitch propeller (CPP), the minimum fuel consumption is achieved satisfying the demanded ship speed. For this, it is necessary that the ship is operated on the ideal operating line which satisfies the minimum fuel consumption, and the both pitch angle of CPP and throttle valve angle are controlled simultaneously. In this context of view, this paper gives a controller design method for a ship propulsion system with CPP based on noninteracting control theory. Where, linear matrix inequality (LMI) approach is introduced for the control system design to satisfy the given $H_{\infty}$, constraint in the presence of physical parameter perturbation and disturbance input. To the end, the validity and applicability of this approach are illustrated by the simulation in the all operating ranges.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.530-533
• /
• 1995

This paper deals with the problem of motion planning for a unicycle-like robot. We present a simple local planner for unicycle model, based on an approximation of the desired configuration generated by local holonomic planner that ignores motion constraints. To guarantee a collision avoidance, we propose an inequality constraint, based on the motion analysis with the constant control input and time interval. Consequently, we formulate our problem as the constrained optimization problem and a feedback scheme based on local sensor information is established by simply solving this problem. Through simulations, we confirm the validity and effectiveness of our algorithm.

• 제어로봇시스템학회논문지
• /
• 제11권3호
• /
• pp.240-245
• /
• 2005

In this paper, planar waypoint guidance synthesis for UAVs using the LQ optimal impact-angle-control guidance law is proposed. We prove that the energy-optimal control problem with the constraint of passing through the waypoints is equivalent to the problem of finding the optimal pass angles on each waypoint of the optimal impact-angle-control law. The optimal pass angles can be obtained as a numerical solution of the simple pass angle optimization problem that requires neither input parameterization nor constraints. The trajectory obtained by applying the optimal impact-angle-control law with these optimal pass angles becomes energy optimal.

• 대한기계학회논문집A
• /
• 제25권5호
• /
• pp.779-787
• /
• 2001

The multi degree of freedom system using magnetic levitation has been implemented successfully. Differently from another noncontact systems, the developed system was focused on the maximization of the system stiffness under the constraint of a limited input. The variation of a relative adopting point between the magnetic pair, its location on the fixed base, and the selection of optimal specifications for the main active magnetic elements give us another chance to realize the increased robustness against external disturbances with the less control inputs. In this paper, the overall development procedures are given including the optimal design, the dynamic modeling, the various control tests, and the main issues to be solved.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1997년도 Proceedings International Workshop on New Video Media Technology
• /
• pp.31-36
• /
• 1997

Bit allocation is a critical problem in video encoding such as MPEG. To improve the quality of the reconstructed sequence for a given bit rate, the assigned target bits for a group of pictures (GOP) must be allocated to each picture efficiently. In this paper, we derive a target bit allocation algorithm for more efficient rate control, by assuming that the average rate-distortion curve for an input source is logarithmic. This target bit allocation is based on Shannon's rate-distortion theory, which deals with the minimization of source distortion subject to a channel rate constraint. Simulation results show that the proposed target bit allocation algorithm provides better performance than the one in MPEG-2 Test Model 5 (TM5).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권11호
• /
• pp.5360-5376
• /
• 2017

In this paper, we study the cross-layer design for the AMC/HARQ-based wireless networks, and propose a new dynamic transmission-mode selection scheme to improve system spectrum efficiency. In the proposed scheme, dynamic thresholds for transmission-mode selection in each packet transmission and retransmission are jointly designed under the constraint of the overall packet error rate. Comparing with the existing schemes, the proposed scheme is inclined to apply higher modulation order at the first several (re)transmissions, which corresponds to higher-rate transmission modes thus higher average system spectrum efficiency. We also extend the cross-layer design to MIMO (Multi-input Multi-output) communication scenarios. Numerical results show that the proposed new dynamic transmission-mode selection scheme generally achieves higher average spectrum efficiency than the conventional and existing cross-layer design.

• 한국음향학회지
• /
• 제7권2호
• /
• pp.5-19
• /
• 1988

본 논문은 최적조절기, 최적추적제어, 최단시간제어 및 힘상쇄 관측기이론 등을 이용하여 탄성계 진동을 능동적으로 제어하기 위한 제어기 개발에 관한 연구로 탄성계의 모달해석방법을 통하여 작동기의 설치위치, 가중치의 선정 등 각종 파과미터가 제어기의 제어성능에 미치는 영향에 대하여 검토하였다.

• Journal of Welding and Joining
• /
• 제10권2호
• /
• pp.32-42
• /
• 1992

A method of optimization of process parameters in Arc Welding has been discussed in this paper. The method of investigation is based on the numerical calculation of weld bead by a finite element method and non-linear optimization technique is applied to estimated the optimization process parameters from the numerical calculation. The common package program(ANSYS 4.4A) was used to obtain the process parameters for a thin plate arc welding (TIG, CO$_{2}$). The results on some test are satisfactory and the used method of this paper is a useful guide to the optimum welding condition.

• 제어로봇시스템학회논문지
• /
• 제14권3호
• /
• pp.295-300
• /
• 2008

In this paper, a new looper controller is proposed to minimize the tension variation of a strip in the hot strip finishing mill. The proposed control technology is based on a receding horizon control (RHC) to satisfy the constraints on the control input/state variables. The finite terminal weighting matrix is used instead of the terminal equality constraint. The closed loop stability of the RHC for the looper system is analyzed to guarantee the monotonicity of the optimal cost. Furthermore, the RHC is combined with a 4SID(Subspace-based State Space System Identification) model identifier to improve the robustness for the parameter variation and the disturbance of an actuator. As a result, it is shown through a computer simulation that the proposed control scheme satisfies the given constraints on the control inputs and states: roll speed, looper current, unit tension, and looper angle. The control scheme also diminishes the tension variation for the parameter variation and the disturbance as well.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.233-236
• /
• 2004

This paper proposes new method for the enhancement of nonexistent high frequency spectral contents from low sample rate audio signal. For example, Due to the protocol constraint, the audio bandwidth of MP3 is restricted to 16Khz. Although band-restricted MP3 audio provide savings of storage space and network bandwidth, it suffers a major problem of a loss in high frequency fidelity such as localization, ambient information, and bright nature of audio. This paper provides a new mathematical analysis for the adaptive estimation of the high frequency contents based on the nature of the input low sample rate audio. Proposed method can be worked globally to any kind of audio such as speech and music that are restricted by sampling rate and bandwidth.