• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.225-231
• /
• 2020

Fresh water that can be used by a person of the total amount of water on the planet is increased because it is less than 0.01 % except underground water, ice and snow, etc. water management response need. In order to protect and efficiently utilize water resources, major countries are conducting water footprint studies that can quantitatively estimate the amount of water put into the operating phase of the resource harvesting phase, mainly agriculture. Korea has also recently developed a number of policies in order to cope with water shortages, and in the construction industry, as well as the need for basic research to support it has been emphasized. This study was constructed DB up to the raw material harvesting step, the transport step, the production stage in order to estimate the water consumption of resources to be put into the work process to target the drainage of the road. Water usage estimation method was utilized the method presented in the Water Footprint Manual and the environmental score card certification guide, unit water usage each drainage main method was calculated after estimating the water footprint considering the water character factor, indirect water and the direct water, the water consumption factor of material input to each process. Brown asphalt, rebar, remicon of the drainage material as a result of the water footprint calculation accounted for 97 % of the total. Drainage method is a culvert, a side channel, a culvert wing wall, reinforced concrete open channel accounted for 92.2 % of the total. Drainage total step-by-step calculated water consumption and water footprint was found in order of raw material harvesting step, transport stage, production stage. Water footprint each drainage method or total drainage material calculated in this study can be used as a base data in the agricultural and construction sectors. In order to increase the reliability of the analysis, it is believed that further overseas databases will be needed for continuous review and research.

• Geotechnical Engineering
• /
• v.2 no.1
• /
• pp.27-44
• /
• 1986

The measured soil data are analyzed to the descriptive statistics and classified into the four models of uncorrelated-normal (UNNO), uncorrelated-nonnormal (VNNN), correlatedonnormal(CONN), and correlated-nonnormal(CONN) . This paper presents the comparisons of reliability index and check points using the advanced first-order second-moment method with respect to the four models as well as BASIC Program. A sin91e-mode Performance function is consisted of the basic design variables of bearing capacity and settlements on shallow foundations and input the above analyzed soil informations. The main conclusions obtained in this study are summarized as follows: 1. In the bearing capacity mode, cohesion and bearing-capacity factors by C-U test are accepted for normal and lognormal distribution, respectively, and negatively low correlated to each other. Since the reliability index of the CONN model is the lowest one of the four model, which could be recommended a reliability.based design, whereas the other model might overestimate the geotechnical conditions. 2. In the case of settlements mode, the virgin compression ratio and preccnsolidation pressure are fitted for normal and lognormal distribution, respectively. Constraining settlements to the lower ones computed by deterministic method, The CONN model is the lowest reliability of the four models.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.1
• /
• pp.69-84
• /
• 2023

Despite the continuous installation and regular inspection of waste treatment facilities, complaints about excessive incineration and illegal dumping stench continue to occur at on-site treatment facilities. In addition, field surveys were conducted on the waste treatment facilities currently in operation (6 type) to understand the waste treatment process for each field, to grasp the main operating factors applied to the inspection. In addition, we calculated the material·energy balance for each main process and confirmed the proper operation of the waste disposal facility. As a result of the site survey, in the case of heat treatment facilities such as incineration, cement kilns, and incineration heat recovery facilities, the main factors are maintenance of the temperature of the incinerator required for incineration and treatment of the generated air pollutants, and in the case of landfill facilities Retaining wall stability, closed landfill leachate and emission control emerged as major factors. In the case of sterilization and crushing facilities, the most important factor is whether or not sterilization is possible (apobacterium inspection).In the case of food distribution waste treatment facilities, retention time and odor control during fermentation (digestion, decomposed) are major factors. Calculation results of material balance and energy resin for each waste treatment facility In the case of incineration facilities, it was confirmed that the amount of flooring materials generated is about 14 % and the amount of scattering materials is about 3 % of the amount of waste input, and that the facility is being operated properly. In addition, among foodwaste facilities, in the case of an anaerobic digestion facility, the amount of biogas generated relative to the amount of inflow is about 17 %, and the biogas conversion efficiency is about 81 %, in the case of composting facility, about 11 % composting of the inflow waste was produced, and it was comfirmend that all were properly operated. As a result, in order to improve the inspection method for waste treatment facilities, it is necessary not only to accumulate quantitative standards for detailed inspection methods, but also to collect operational data for one year at the time of regular inspections of each facility, Grasping the flow and judging whether or not the treatment facility is properly operated. It is then determined that the operation and management efficiency of the treatment facility will increase.

• Journal of Intelligence and Information Systems
• /
• v.21 no.4
• /
• pp.111-131
• /
• 2015

There are only a handful number of research conducted on pattern analysis of corporate distress as compared with research for bankruptcy prediction. The few that exists mainly focus on audited firms because financial data collection is easier for these firms. But in reality, corporate financial distress is a far more common and critical phenomenon for non-audited firms which are mainly comprised of small and medium sized firms. The purpose of this paper is to classify non-audited firms under distress according to their financial ratio using data mining; Self-Organizing Map (SOM). SOM is a type of artificial neural network that is trained using unsupervised learning to produce a lower dimensional discretized representation of the input space of the training samples, called a map. SOM is different from other artificial neural networks as it applies competitive learning as opposed to error-correction learning such as backpropagation with gradient descent, and in the sense that it uses a neighborhood function to preserve the topological properties of the input space. It is one of the popular and successful clustering algorithm. In this study, we classify types of financial distress firms, specially, non-audited firms. In the empirical test, we collect 10 financial ratios of 100 non-audited firms under distress in 2004 for the previous two years (2002 and 2003). Using these financial ratios and the SOM algorithm, five distinct patterns were distinguished. In pattern 1, financial distress was very serious in almost all financial ratios. 12% of the firms are included in these patterns. In pattern 2, financial distress was weak in almost financial ratios. 14% of the firms are included in pattern 2. In pattern 3, growth ratio was the worst among all patterns. It is speculated that the firms of this pattern may be under distress due to severe competition in their industries. Approximately 30% of the firms fell into this group. In pattern 4, the growth ratio was higher than any other pattern but the cash ratio and profitability ratio were not at the level of the growth ratio. It is concluded that the firms of this pattern were under distress in pursuit of expanding their business. About 25% of the firms were in this pattern. Last, pattern 5 encompassed very solvent firms. Perhaps firms of this pattern were distressed due to a bad short-term strategic decision or due to problems with the enterpriser of the firms. Approximately 18% of the firms were under this pattern. This study has the academic and empirical contribution. In the perspectives of the academic contribution, non-audited companies that tend to be easily bankrupt and have the unstructured or easily manipulated financial data are classified by the data mining technology (Self-Organizing Map) rather than big sized audited firms that have the well prepared and reliable financial data. In the perspectives of the empirical one, even though the financial data of the non-audited firms are conducted to analyze, it is useful for find out the first order symptom of financial distress, which makes us to forecast the prediction of bankruptcy of the firms and to manage the early warning and alert signal. These are the academic and empirical contribution of this study. The limitation of this research is to analyze only 100 corporates due to the difficulty of collecting the financial data of the non-audited firms, which make us to be hard to proceed to the analysis by the category or size difference. Also, non-financial qualitative data is crucial for the analysis of bankruptcy. Thus, the non-financial qualitative factor is taken into account for the next study. This study sheds some light on the non-audited small and medium sized firms' distress prediction in the future.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.1
• /
• pp.124-136
• /
• 2002

As an official journal of the Asian-Australasian Association of Animal Production Societies (AAAP), the Asian-Australasian Journal of Animal Sciences (AJAS) was born in February 1987 and the first issue (Volume 1, Number 1) was published in March 1988 under the Editorship of Professor In K. Han (Korea). By the end of 2001, a total of 84 issues in 14 volumes and 1,761 papers in 11,462 pages had been published. In addition to these 14 volumes, a special issue entitled "Recent Advances in Animal Nutrition" (April, 2000) and 3 supplements entitled "Proceedings of the 9th AAAP Animal Science Congress" (July, 2000) were also published. Publication frequency has steadily increased from 4 issues in 1988, to 6 issues in 1997 and to 12 issues in 2000. The total number of pages per volume and the number of original or review papers published also increased. Some significant milestones in the history of the AJAS include that (1) it became a Science Citation Index (SCI) journal in 1997, (2) the impact factor of the journal improved from 0.257 in 1999 to 0.446 in 2000, (3) it became a monthly journal (12 issues per volume) in 2000, (4) it adopted an English editing system in 1999, and (5) it has been covered in "Current Contents/Agriculture, Biology and Environmental Science since 2000. The AJAS is subscribed by 842 individuals or institutions. Annual subscription fees of US$ 50 (Category B) or US$ 70 (Category A) for individuals and US$ 70 (Category B) or US$ 120 (Category A) for institutions are much less than the actual production costs of US$ 130. A list of the 1,761 papers published in AJAS, listed according to subject area, may be found in the AJAS homepage (http://www.ajas.snu.ac.kr) and a very well prepared "Editorial Policy with Guide for Authors" is available in the Appendix of this paper. With regard to the submission status of manuscripts from AAAP member countries, India (235), Korea (235) and Japan (198) have submitted the most manuscripts. On the other hand, Mongolia, Nepal, and Papua New Guinea have never submitted any articles. The average time required from submission of a manuscript to printing in the AJAS has been reduced from 11 months in 1997-2000 to 7.8 months in 2001. The average rejection rate of manuscripts was 35.3%, a percentage slightly higher than most leading animal science journals. The total number of scientific papers published in the AJAS by AAAP member countries during a 14-year period (1988-2001) was 1,333 papers (75.7%) and that by non- AAAP member countries was 428 papers (24.3%). Japanese animal scientists have published the largest number of papers (397), followed by Korea (275), India (160), Bangladesh (111), Pakistan (85), Australia (71), Malaysia (59), China (53), Thailand (53), and Indonesia (34). It is regrettable that the Philippines (15), Vietnam (10), New Zealand (8), Nepal (2), Mongolia (0) and Papua New Guinea (0) have not actively participated in publishing papers in the AJAS. It is also interesting to note that the top 5 countries (Bangladesh, India, Japan, Korea and Pakistan) have published 1,028 papers in total indicating 77% of the total papers being published by AAAP animal scientists from Vol. 1 to 14 of the AJAS. The largest number of papers were published in the ruminant nutrition section (591 papers-44.3%), followed by the non-ruminant nutrition section (251 papers-18.8%), the animal reproduction section (153 papers-11.5%) and the animal breeding section (115 papers-8.6%). The largest portion of AJAS manuscripts was reviewed by Korean editors (44.3%), followed by Japanese editors (18.1%), Australian editors (6.0%) and Chinese editors (5.6%). Editors from the rest of the AAAP member countries have reviewed slightly less than 5% of the total AJAS manuscripts. It was regrettably noticed that editorial members representing Nepal (66.7%), Mongolia (50.0%), India (35.7%), Pakistan (25.0%), Papua New Guinea (25.0%), Malaysia (22.8%) and New Zealand (21.5%) have failed to return many of the manuscripts requested to be reviewed by the Editor-in-Chief. Financial records show that Korea has contributed the largest portion of production costs (68.5%), followed by Japan (17.3%), China (8.3%), and Australia (3.5%). It was found that 6 AAAP member countries have contributed less than 1% of the total production costs (Bangladesh, India, Indonesia, Malaysia, Papua New Guinea and Thailand), and another 6 AAAP member countries (Mongolia, Nepal and Pakistan, Philippine and Vietnam) have never provided any financial contribution in the form of subscriptions, page charges or reprints. It should be pointed out that most AAAP member countries have published more papers than their financial input with the exception of Korea and China. For example, Japan has published 29.8% of the total papers published in AJAS by AAAP member countries. However, Japan has contributed only 17.3% of total income. Similar trends could also be found in the case of Australia, Bangladesh, India, Indonesia, Malaysia and Thailand. A total of 12 Asian young animal scientists (under 40 years of age) have been awarded the AJAS-Purina Outstanding Research Award which was initiated in 1990 with a donation of US$ 2,000-3,000 by Mr. K. Y. Kim, President of Agribrands Purina Korea Inc. In order to improve the impact factor (citation frequency) and the financial structure of the AJAS, (1) submission of more manuscripts of good quality should be encouraged, (2) subscription rate of all AAAP member countries, especially Category B member countries should be dramatically increased, (3) a page charge policy and reprint ordering system should be applied to all AAAP member countries, and (4) all AAAP countries, especially Category A member countries should share more of the financial burden (advertisement revenue or support from public or private sector).

• Journal of Intelligence and Information Systems
• /
• v.27 no.1
• /
• pp.1-21
• /
• 2021

As the global business environment changes, uncertainties in technology development and market needs increase, and competition among companies intensifies, interests and demands for R&D activities of individual companies are increasing. In order to cope with these environmental changes, R&D companies are strengthening R&D investment as one of the means to enhance the qualitative competitiveness of R&D while paying more attention to facility investment. As a result, facilities or R&D investment elements are inevitably a burden for R&D companies to bear future uncertainties. It is true that the management strategy of increasing investment in R&D as a means of enhancing R&D capability is highly uncertain in terms of corporate performance. In this study, the structural factors that influence the R&D capabilities of companies are explored in terms of technology management capabilities, R&D capabilities, and corporate classification attributes by utilizing data mining techniques, and the characteristics these individual factors present according to the level of R&D capabilities are analyzed. This study also showed cluster analysis and experimental results based on evidence data for all domestic R&D companies, and is expected to provide important implications for corporate management strategies to enhance R&D capabilities of individual companies. For each of the three viewpoints, detailed evaluation indexes were composed of 7, 2, and 4, respectively, to quantitatively measure individual levels in the corresponding area. In the case of technology management capability and R&D capability, the sub-item evaluation indexes that are being used by current domestic technology evaluation agencies were referenced, and the final detailed evaluation index was newly constructed in consideration of whether data could be obtained quantitatively. In the case of corporate classification attributes, the most basic corporate classification profile information is considered. In particular, in order to grasp the homogeneity of the R&D competency level, a comprehensive score for each company was given using detailed evaluation indicators of technology management capability and R&D capability, and the competency level was classified into five grades and compared with the cluster analysis results. In order to give the meaning according to the comparative evaluation between the analyzed cluster and the competency level grade, the clusters with high and low trends in R&D competency level were searched for each cluster. Afterwards, characteristics according to detailed evaluation indicators were analyzed in the cluster. Through this method of conducting research, two groups with high R&D competency and one with low level of R&D competency were analyzed, and the remaining two clusters were similar with almost high incidence. As a result, in this study, individual characteristics according to detailed evaluation indexes were analyzed for two clusters with high competency level and one cluster with low competency level. The implications of the results of this study are that the faster the replacement cycle of professional managers who can effectively respond to changes in technology and market demand, the more likely they will contribute to enhancing R&D capabilities. In the case of a private company, it is necessary to increase the intensity of input of R&D capabilities by enhancing the sense of belonging of R&D personnel to the company through conversion to a corporate company, and to provide the accuracy of responsibility and authority through the organization of the team unit. Since the number of technical commercialization achievements and technology certifications are occurring both in the case of contributing to capacity improvement and in case of not, it was confirmed that there is a limit in reviewing it as an important factor for enhancing R&D capacity from the perspective of management. Lastly, the experience of utility model filing was identified as a factor that has an important influence on R&D capability, and it was confirmed the need to provide motivation to encourage utility model filings in order to enhance R&D capability. As such, the results of this study are expected to provide important implications for corporate management strategies to enhance individual companies' R&D capabilities.

• Journal of Internet Computing and Services
• /
• v.15 no.3
• /
• pp.79-90
• /
• 2014

User authentication based on ID and PW has been widely used. As the Internet has become a growing part of people' lives, input times of ID/PW have been increased for a variety of services. People have already learned enough to perform the authentication procedure and have entered ID/PW while ones are unconscious. This is referred to as the adaptive unconscious, a set of mental processes incoming information and producing judgements and behaviors without our conscious awareness and within a second. Most people have joined up for various websites with a small number of IDs/PWs, because they relied on their memory for managing IDs/PWs. Human memory decays with the passing of time and knowledges in human memory tend to interfere with each other. For that reason, there is the potential for people to enter an invalid ID/PW. Therefore, these characteristics above mentioned regarding of user authentication with ID/PW can lead to human vulnerabilities: people use a few PWs for various websites, manage IDs/PWs depending on their memory, and enter ID/PW unconsciously. Based on the vulnerability of human factors, a variety of information leakage attacks such as phishing and pharming attacks have been increasing exponentially. In the past, information leakage attacks exploited vulnerabilities of hardware, operating system, software and so on. However, most of current attacks tend to exploit the vulnerabilities of the human factors. These attacks based on the vulnerability of the human factor are called social-engineering attacks. Recently, malicious social-engineering technique such as phishing and pharming attacks is one of the biggest security problems. Phishing is an attack of attempting to obtain valuable information such as ID/PW and pharming is an attack intended to steal personal data by redirecting a website's traffic to a fraudulent copy of a legitimate website. Screens of fraudulent copies used for both phishing and pharming attacks are almost identical to those of legitimate websites, and even the pharming can include the deceptive URL address. Therefore, without the supports of prevention and detection techniques such as vaccines and reputation system, it is difficult for users to determine intuitively whether the site is the phishing and pharming sites or legitimate site. The previous researches in terms of phishing and pharming attacks have mainly studied on technical solutions. In this paper, we focus on human behaviour when users are confronted by phishing and pharming attacks without knowing them. We conducted an attack experiment in order to find out how many IDs/PWs are leaked from pharming and phishing attack. We firstly configured the experimental settings in the same condition of phishing and pharming attacks and build a phishing site for the experiment. We then recruited 64 voluntary participants and asked them to log in our experimental site. For each participant, we conducted a questionnaire survey with regard to the experiment. Through the attack experiment and survey, we observed whether their password are leaked out when logging in the experimental phishing site, and how many different passwords are leaked among the total number of passwords of each participant. Consequently, we found out that most participants unconsciously logged in the site and the ID/PW management dependent on human memory caused the leakage of multiple passwords. The user should actively utilize repudiation systems and the service provider with online site should support prevention techniques that the user can intuitively determined whether the site is phishing.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.705-715
• /
• 2010

The adoption of carbon foot print system is being activated mostly in the developed countries as one of the long-term response towards tightened up regulations and standards on carbon emission in the agricultural sector. The Korean Ministry of Environment excluded the primary agricultural products from the carbon foot print system due to lack of LCI (life cycle inventory) database in agriculture. Therefore, the research on and establishment of LCI database in the agriculture for adoption of carbon foot print system is urgent. Development of LCA (life cycle assessment) methodology for application of LCA to agricultural environment in Korea is also very important. Application of LCA methodology to agricultural environment in Korea is an early stage. Therefore, this study was carried out to find out the effect of lettuce cultivation on agricultural environment by establishing LCA methodology. Data collection of agricultural input and output for establishing LCI was carried out by collecting statistical data and documents on income from agro and livestock products prepared by RDA. LCA methodology for agriculture was reviewed by investigating LCA methodology and LCA applications of foreign countries. Results based on 1 kg of lettuce production showed that inputs including N, P, organic fertilizers, compound fertilizers and crop protectants were the main sources of major emission factor during lettuce cropping process. The amount of inputs considering the amount of active ingredients was required to estimate the actual quantity of the inputs used. Major emissions due to agricultural activities were $N_2O$ (emission to air) and ${NO_3}^-$/${PO_4}^-$ (emission to water) from fertilizers, organic compounds from pesticides and air pollutants from fossil fuel combustion in using agricultural machines. The softwares for LCIA (life cycle impact assessment) and LCA used in Korea are 'PASS' and 'TOTAL' which have been developed by the Ministry of Knowledge Economy and the Ministry of Environment. However, the models used for the softwares are the ones developed in foreign countries. In the future, development of models and optimization of factors for characterization, normalization and weighting suitable to Korean agricultural environment need to be done for more precise LCA analysis in the agricultural area.

• Journal of Society of Preventive Korean Medicine
• /
• v.6 no.1
• /
• pp.51-95
• /
• 2002

1. As a point at issue of occidental medicine examination, followings have been indicated, 1) Occidental medical examination is performed by mainly test and instrument and therefore, role of doctors could be excluded and it could be diagnosed only for target disease and 2) in Korea, it could not be conducted in public medical system and therefore improvement effect of public health promotion could not be made due to increase of total medical expenses and infirmity of post management. These points are substantial limit of paradigm resided in occidental medicine and also problem caused by unique characteristics of medical system of Korea. In Korea, result of occidental medical examination show increased health risk from aged thirties and major diagnosed diseases are circulatory disease or chronic disease such as hepatic, hyperlipemic, hypertensional disease and diabetes, etc. Accounting that those chronic disease make a role as major public health risk, it is difficult that medical examination by only occidental medicine make effect on public health promotion. 2. Characteristics of oriental medicine examination could be summarized as diagnosis (information acquisition based on the facts) and demonstration (speculation based on acquired information) and in addition, quadruple diagnosis, as a medical examination method, include test as well as basic examination. Accounting on oriental medical examination, principally it is performed by independent herbalist and therefore, herbalist could acquire systemic result during first medical examination. Based on the theory of inner-outer examination, oriental medical examination has a principle of universe theory, systemic analysis of quadruple diagnosis, demonstration & reasoning. In addition, root of oriental medical examination could be found in pre-disease theory, a principal theory of oriental medicine. Pre-disease service could prove the advantage of oriental medicine in medical examination activities and therefore, it is needed that content of oriental medical examination should be actualized in current medical system. 3. In this study, oriental medical examination program, comprised of pulse-diagnosis, contrast muscular taking and medical consultation of herbalist is progressed communally with occidental medical examination. As pre-examination, questionary was given of general characteristics, health promoting life style, physical constitution and subjective symptom of musculoskeletal system. In addition, post-examination notification was given to subjects about health promoting control, physical constitution regimen and management of musculoskeletal system. During this study program, verification was conducted for input of acquired information and difference of each information after analysis and in addition, performed was analysis of factor influencing health promoting life style and musculoskeletal subjective symptom and evaluation of relationship of physical constitution and health promoting life study. In addition, it was verified of difference between musculoskeletal subjective symptom and result of muscle contrast picture evaluation. 4. Evaluation of oriental medical examination model is divided into 2 categories of oriental medical examination-consultation and result evaluation -post management. Oriental medical examination-consultation demands establishment of examination system, standardization of examination and establishment of examination form and in addition, it should be admitted as enlarged examination assists systemic quadruple diagnosis of herbalist not a key of oriental medical examination. In addition, information acquisition for research purpose should be performed according to the systemic research plan based on the separation of questionary for examination purpose and research purpose. For evaluation of the result, it was concluded that needed are result evaluation meets oriental medical system and post-notification system, informing health management information, based on examination result. 5. Accounting on satisfaction for oriental medical examination model, affirmative reply was much higher (66%) than negative (8.64%). Satisfaction of each area was in order of consultation of herbalist, systemic muscle contrast taking, pulse examination, post-notification and questionary fill-up and dissatisfaction was in order of post-notification, questionary fill-up, consultation of herbalist, systemic muscle contrast taking and pulse measurement. Satisfaction for collaborative examination of occidental and oriental medicine was over 60% and over 75% hope oriental examination would be included in later medical examination program. Based on this result, collaborative examination including occidental and oriental medicine could increase satisfaction of subjects for medical examination program.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1157-1163
• /
• 2012

This study was performed a comparative life cycle assessment (LCA) among three rice production systems in order to analyze the difference of greenhouse gases (GHGs) emissions and environment impacts. Its life cycle inventory (LCI) database (DB) was established using data obtained from interview with conventional, without agricultural chemical and organic farming at Gunsan and Iksan, Jeonbuk province in 2011. According to the result of LCI analysis, $CO_2$ was mostly emitted from fertilizer production process and rice cropping phase. $CH_4$ and $N_2O$ were almost emitted from rice cultivation phase. The value of carbon footprint to produce 1 kg rice (unhulled) on conventional rice production system was 1.01E+00 kg $CO_2$-eq. $kg^{-1}$ and it was the highest value among three rice production systems. The value of carbon footprints on without agricultural chemical and organic rice production systems were 5.37E-01 $CO_2$-eq. $kg^{-1}$ and 6.58E-01 $CO_2$-eq. $kg^{-1}$, respectively. Without agricultural chemical rice production system whose input amount was the smallest had the lowest value of carbon footprint. Although the yield of rice from organic farming was the lowest, its value of carbon footprint less than that of conventional farming. Because there is no compound fertilizer inputs in organic farming. Compound fertilizer production and methane emission during rice cultivation were the main factor to GHGs emission in conventional and without agricultural chemical rice production systems. In organic rice production system, the main factors to GHGs emission were using fossil fuel on machine operation and methane emission from rice paddy field.