• 한국산업융합학회 논문집
• /
• 제23권1호
• /
• pp.9-15
• /
• 2020

The cooperation with other work types and designing procedure in plant industry and engineering showed clear differences from general construction industries. Current problems are that design's consistency is reduced because of the false system of interface and it ultimately causes frequency changes of design and delayed submission of final book. To solve the problems, the improvements of designing procedure were studied by focusing on the field of architectural designing and the range was limited from power plant construction industry to engineering designing field. If combining GA with the field of architectural designing and receiving data previously, it's possible to conduct expectable designing on small changes in the future, so it's expected to improve greatly cooperation with interface among the work types of power plant engineering received previously from the aspect of consistency. For the application of designing tool, a checklist, interim check will be conducted if progressed by list's division in the designing procedure, not book's completing period. In the interface among the designing work types, direct confirmation and revision must be conducted. In case of 3D modeling, the reflection of input data must be conducted from the basic designing so as to solve interferences intensively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.103-106
• /
• 2002

We prepared $Co_{77}Cr_{20}Ta_{3}$ thin film with Facing Targets Sputtering Apparatus. which can deposit a high quality thin film CoCrTa magnetic layer for Perpendicular magnetic recording media. In order to obtain Good Crystal orientation of CoCrTa thin films. We prepared Thin Films on slide glass substrate. The thickness of Buffer-layer were varied from 10 to 50 nm and Magnetic layer thickness fixed 100[nm]. input current was varied from 0.2[A] to 0.5[A]. Substrate temperature was varied from room temperature to ${250^{\circ}C}$ respectively. The crystal orientation of the CoCrTa film were examined with XRD. Introduce Buffer-layer thin films showed improvement of dispersion angle of c-axis orientation (${\Delta\theta}_{50}$).

• 전기학회논문지
• /
• 제64권4호
• /
• pp.653-659
• /
• 2015

In the last few years, the regulations for efficiency grade of the three phase induction motor are internationally being discussed and upgraded for the protection of environment and energy saving. So the efficiency improvement and the reliable test result are essential to determine the premium grade three phase induction motor. While a study on developing the efficiency motor is active, there is little research about the guarantee for efficiency. So in this paper, the dispersion characteristic of the efficiency is studied using uncertainty theory for the three phase induction motor to improve the reliability of efficiency. The values such as input voltage, current, speed, torque were obtained by loss separation method to evaluate the uncertainty. From the result, it was known that the important loss factor could affect the uncertainty is the stray loss.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.705-709
• /
• 1995

The objective of this study is to design a multi-layer neural network which controls the position of excavator's attachment. In this paper, a dynamic controller has been developed based on an error back-propagation(BP) neural network. Since the neural network can model an arbitrary nonlinear mapping, it was used as a commanded feedforward input generator. A PD feedback controller is used in parallel with the feedforward neural network to train the system. The neural network was trained by the current state of the excavator as well as the PD feedback error. By using the BP network as a feedforward controller, no a priori knowledge on system dynamics is need. Computer simulation results demonstrate such powerful characteristics of the proposed controller as adaptation to changing environment, robustness to disturbancen and performance improvement with the on-line learning in the position control of excavator attachment.

• Smart Structures and Systems
• /
• 제20권5호
• /
• pp.595-605
• /
• 2017

The present article reported the thermal buckling strength of the sandwich shell panel structure and subsequent improvement of the same by embedding shape memory alloy (SMA) fibre via a general higher-order mathematical model in conjunction with finite element method. The geometrical distortion of the panel structure due to the temperature is included using Green-Lagrange strain-displacement relations. In addition, the material nonlinearity of SMA fibre due to the elevated thermal environment also incorporated in the current analysis through the marching technique. The final form of the equilibrium equation is obtained by minimising the total potential energy functional and solved computationally with the help of an original MATLAB code. The convergence and the accuracy of the developed model are demonstrated by solving similar kind of published numerical examples including the necessary input parameter. After the necessary establishment of the newly developed numerical solution, the model is extended further to examine the effect of the different structural parameters (side-to-thickness ratios, curvature ratios, core-to-face thickness ratios, volume fractions of SMA fibre and end conditions) on the buckling strength of the SMA embedded sandwich composite shell panel including the different geometrical configurations.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1187-1194
• /
• 2017

In this paper, a high step-up DC-DC PWM converter with continuous input current and low voltage stress is presented for renewable energy application. The proposed converter is composed of a boost converter integrated with an auxiliary step-up circuit. The auxiliary circuit uses an additional coupled inductor and a balancing capacitor with voltage doubler and switching capacitor technique to achieve high step-up voltage gain with an appropriate switch duty cycle. The switched capacitors are charged in parallel and discharged in series by the coupled inductor, stacking on the output capacitor. In the proposed converter, the voltage stress on the main switch is clamped, so a low voltage switch with low ON resistance can be used to reduce the conduction loss which results in the efficiency improvement. A detailed discussion on the operating principle and steady-state analyses are presented in the paper. To justify the theoretical analysis, experimental results of a 200W 40/400V prototype is presented. In addition, the conducted electromagnetic emissions are measured which shows a good EMC performance.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1998년도 21세기 한반도 농업전망과 대책(한국작물학회.한국육종학회 공동주관 심포지움 회보)
• /
• pp.189-209
• /
• 1998

Food resources have been supplied more and more by crop land expansion, technological Improvement for higher crop yield, establishment of irrigation system, and input of fertilizers, chemicals and others, to sustain a world population increase currently about 6 billion. Food demand will be significantly increased in the 21st century due to population increases of 90 million per year and more consumption of meat with per capital income increase. But food production increase will be limited by difficulty of crop/irrigation land expansion and small or decreasing effectiveness of fertilizer use. Development of new techniques for higher yield per ha is only one way to meet future food demand increase. Optimistic prospect for food demand/supply balance was reported by FAO until 2010, and IFPRI until 2020. However, Worldwatch Institute warned world food supply will be less than expected demand by 500 million tons of cereal grains in 2030. It is necessary to establish a national plan to meet expected worldwide shortage of food resources in 21 century. What planning should be under taken to meet the upcoming century of food shortage in Korea whose food self-sufficiency rate is only $30{\%}$. It is recommended that (1) keep paddy field area as much as 1,100 thousand ha, (2) expansion of barley and wheat cultivation on all paddy area in winter season, (3) continue development of new technology to get international superiority of food resources produced in Korea, (4) expand nationwide the importance of food security under the current financial crisis encountered In Korea, and for food security in the future unified Korean peninsula.

• Journal of information and communication convergence engineering
• /
• 제2권2호
• /
• pp.110-115
• /
• 2004

The prosthesis of current commercialized apparatus has considerable problems, requiring improvement. Especially, LLP(Lower Limb Prosthesis)-related problems have improved, but it cannot provide normal walking because, mainly, the gait control of the LLP does not fit with patient's gait manner. To solve this problem, HCI((Human Computer Interaction) that adapts and controls LLP postures according to patient's gait manner more effectively is studied in this research. The proposed control technique has 2 steps： 1) the multilayer neural network forecasts angles of gait of LLP by using the angle of normal side of lower limbs； and 2) the adaptive neural controller manages the postures of the LLP based on the predicted joint angles. According to the experiment data, the prediction error of hip angles was 0.32［deg.］, and the predicted error of knee angles was 0.12［deg.] for the estimated posture angles for the LLP. The performance data was obtained by applying the reference inputs of the LLP controller while walking. Accordingly, the control performance of the hip prosthesis improved by 80% due to the control postures of the LLP using the reference input when comparing with LQR controller.

• 조명전기설비학회논문지
• /
• 제18권2호
• /
• pp.115-124
• /
• 2004

본 논문은 링형 초음파모터의 진동모드에 의한 진동특성 개선을 제안하였다. 고정자의 압전세락믹과 탄성체에 대한 설계는 공진주파수, 진동모드 및 결합계수 등을 고려한 유한요소법(FEM)에 의해 계산되었다. 6차로부터 8차까지의 진동해석 결과를 통하여, 7차 모드는 결합효율, 최소전력소비 및 굴곡 진동에 있어서 매우 우수한 결과를 얻었다. 또한 7차 모드 이상에서는 입력전압에 대한 출력전류가 매우 크게 증가함을 알 수 있었다. 두께 0.5[mm]∼2[mm]까지의 진동계산 결과 0.5[mm]에서 진동변위가 매우 높은 값을 지님을 알 수 있었다. 이러한 해석결과로부터 본 연구에서는 약 43.86[KHz]의 공진주파수을 갖는 외경 50[mm], 내경 22[mm]의 초음파모터를 제조하였으며 다음의 시뮬레이션 결과 42.2[KHz]와 실험결과43.86(KHz)의 값을 얻었다. 따라서 본 논문의 타당성은 시뮬레이션 결과와 실험결과의 비교 검토를 통하여 거의 일치하는 결과를 입증하였다.

• 디지털융복합연구
• /
• 제18권4호
• /
• pp.91-100
• /
• 2020

본 논문은 실종사건에 대한 대응체계의 개선방안을 제시하기 위해 수행되었다. 기존 관련 연구는 대부분 경찰 내부의 실종 대응현황에 대한 검토와 분석을 통하여 개선방안을 제시하는 방법을 활용하였으나, 본 연구는 외부 일반사회의 시각에서 제기하는 현행 실종 대응체계에 대한 우려 또는 비판을 분석하였다. 이를 위하여 지난 5개년 동안 보도된 실종 관련 기사를 질적 연구 프로그램으로 분석한 결과, 초기대응의 비효율, 실종 대응절차별 전문성 부족, 실종 대응 종합관리의 미흡 및 지역사회의 협력 부족 등에 대한 우려가 있음을 발견하였다. 이에 대하여 실종 초기대응의 개선안으로 실종 위험성 판단절차의 정비, 대응절차별 전문성 확보방안으로 실종전담팀의 확충과 프로파일링 입력시스템의 개선 및 실종자 가족 대상 업무의 설정 및 전문화, 실종 대응 종합체계의 구축방안으로 컨트롤타워의 역할 강화 및 체계적 정보관리체계 구축 등을 제시하였다. 제시된 방안을 보다 구체적이고 종합적으로 후속 연구하고 실무의 측면에서 이를 분석 및 검토하여 실종 대응에 대한 지속적인 개선이 도출되어야 한다.