• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.2
• /
• pp.53-62
• /
• 2012

Demand for high resolution weather data grows in the agriculture and forestry fields. Local Analysis and Prediction System (LAPS) can be used to analyze the local weather at high spatial and temporal resolution, utilizing the data from various sources including numerical weather prediction models, wind or temperature profilers, Automated Weather Station (AWS) networks, radars, and satellites. LAPS has been set to analyze weather elements such as air temperature, relative humidity, wind speed, and wind direction every hour at the spatial resolution of $100m{\times}100m$ for Gyeonggi-do on near real-time basis. The AWS data were revised by adding the agricultural field AWS data (33 stations) in addition to the KMA data. The analysis periods were from 1 to 31 August 2009 and from 15 to 21 February 2010. The comparison of the LAPS output showed the smaller errors when using the agricultural AWS observation data together with the KMA data as its input data than using only either the agricultural or KMA AWS data. The accuracy of the current system needs improvement by further optimization of analyzing options of the system. However, the system is highly applicable to various fields in agriculture and forestry because it can provide site specific data with reasonable time intervals.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6247-6253
• /
• 2015

This paper presents the transient-response improved LDO regulator based on parallel error amplifiers. The proposed LDO regulator consists of an error amplifier (E/A1) which has a high gain and narrow bandwidth and a second amplifier (E/A2) which has low gain and wide bandwidth. These amplifiers are in parallel structure. Also, to improve the transient-response properties and slew-rate, some circuit block is added. Using pole-splitting technique, an external capacitor is reduced in a small on-chip size which is suitable for mobile devices. The proposed LDO has been designed and simulated using a Megna/Hynix $0.18{\mu}m$ CMOS parameters. Chip layout size is $500{\mu}m{\times}150{\mu}m$. Simulation results show 2.5 V output voltage and 100 mA load current in an input condition of 2.7 V ~ 3.3 V. Regulation Characteristic presents voltage variation of 26.1 mV and settling time of 510 ns from 100mA to 0 mA. Also, the proposed circuit has been shown voltage variation of 42.8 mV and settling time of 408 ns from 0 mA to 100 mA.

• Journal of Korea Water Resources Association
• /
• v.35 no.6
• /
• pp.737-751
• /
• 2002

Water quality in Daechung Lake was predicted for various discharge conditions of Yongdam dam. The same scenarios were applied as in the previous paper by the authors for Keum River water quality modeling. Effects in water quality due to changes in discharge conditions from Yongdam Dam were less distinct to the Daechung Lake than to the inflowing Keum River due to sink processes in the lake. For the minimum flow year, it is appropriate to maintain Yongdam dam discharge rate to 8.9 $m^3$/sec considering the current field conditions and future predictions of TN and TP concentrations of Yongdam dam. Effect of Yongdam dam discharge conditions to the Daechung Lake water quality were stronger for drier years. However it should be noted that the effects were dependent upon the water quality of Yongdam discharge at the same time. Therefore, water quality management effort should be emphasized before the discussion over the discharge volume of Yongdam dam. The input data sets for simulations in this study were formulated using the available data and assumptions based on authors experiences for the fields. Therefore, continued data collection effort will ensure the validity of this study.

• Korean Journal of Organic Agriculture
• /
• v.7 no.1
• /
• pp.35-48
• /
• 1998

The total amount of dry matter for the green manure crops was great wheat> rye> barley> Italian ryegrass in that order. The green manure crope were verified to have the reducing effect of injury of successive croppingin peper, mainly reducing the occurance of the most important pepper disease, Phytophthora capsisi, and enhancing the pepper quality in the fruit length and diameter. The direct seeding using current commercial pepper variety was proved as not economical one. In the first year of compost application, the growth and yield of red pepper were rather somewhat decreasing compared with those of check plot applied with organic fertilizers. compst application increased the content of organic matter in soil, which suggested compost could be applied for the sustainable purposes. In preference analysis about taking the new technique, the smaller farmer's cultivation area the more they wanted to accept the LISA farming, compared with the conventional one, could be possible to save 12% in the inorganic fertilizer expenses but wasted 412% ant 163% in both organic fertilizer and operator labor expenses, respectively. At the same time, the LISA decreased 15% in production cost but increased 225% and 139% in organic fertilizer quantity and operator labor hours. Since there was a great deal of difference in technological and economic factors from two farming methods, LISA multi-goal decision modeling is further required.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.61-67
• /
• 2016

With the current high distribution rate of smart devices and the recent development of computing technology, user interest in multimedia, such as photos, videos, and so on, has rapidly increased, which is a departure from the simple pattern of information retrieval. Because of these increasing interests, image processing techniques, which generate and process images for diverse applications, are being developed. In entertainment recently, there are some techniques that present a celebrity's image as a mosaic comprising many small images. In addition, studies into the mosaic technique are actively conducted. However, conventional mosaic techniques result in a long processing time as the number of database images increases, because they compare the images in the databases sequentially. Therefore, to increase search efficiency, this paper proposes an algorithm to generate a mosaic image using a discrete cosine transform (DCT) hash. The proposed photo mosaic-generation algorithm is composed of database creation and mosaic image generation. In database creation, it first segments images into blocks with a predefined size. And then, it computes and stores a DCT hash set for each segmented block. In mosaic generation, it efficiently searches for the most similar blocks in the database via DCT hash for every block of the input image, and then it generates the final mosaic. With diverse experimental results, the proposed photo mosaic-creation algorithm can effectively generate a mosaic, regardless of the various types of images and sizes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.101-110
• /
• 2017

The National Emergency Management Agency (NEMA) presented the disaster prevention performance target rainfall (DPPTR) for disaster prevention. The estimation criteria for DPPTR is a 10 year cycle. On the other hand, the target rainfall recalculated every 10 years is difficult to reflect the current change in rainfall on climate change. In this study, the probability of precipitation using the recent rainfall data was prepared and the weights according to socio-economic criteria reflecting the urban characteristics and adjusted probability rainfall criteria were applied to the results. The difference between the existing target rainfall and recalculated result was compared. The input data for the estimated probability rainfall was selected from 6 points located in the rainfall observing station of Chungcheongnam-do, Daejeon region. As a result of the estimation, in the case of upward probability precipitation weight, some similar areas were observed. On the other hand, there were a few cases of upward or downward changes within 10 mm. Considering the rainfall variability and uncertainty due to climate change, the existing target rainfall does not present the condition properly. Therefore, hydrological designers need to calculate the target rainfall, reflecting the present condition.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1899-1909
• /
• 2007

A cross-coupled charge pump with internal pumping capacitor, witch is advantages from a point of minimizing TFT-LCD driver IC module, is newly proposed in this paper. By using a NMOS and a PMOS diode connected to boosting node from VIN node, the pumping node is precharged to the same value each pumping node at start pumping operation. Since the lust-stage charge pump is designed differently from the other stage pumps, a back current of pumped charge from charge pumping node to input stage is prevented. As a pumping clock driver is located the font side of pumping capacitor, the driving capacity is improved by reducing a voltage drop of the pumping clock line from parasitic resistor. Finally, a layout area is decreased more compared with conventional cross-coupled charge pump by using a stack-MIM capacitors. A proposed charge pump for TFT-LCD driver IC is designed with $0.13{\mu}m$ triple-well DDI process, fabricated, and tested.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1845-1852
• /
• 2008

The key elements of inter prediction are motion estimation(ME) and motion compensation(MC). Motion estimation is to find the optimum motion vectors, not only by using a distance criteria like the SAD, but also by taking into account the resulting number of 비트s in the 비트 stream. Motion compensation is compensate for movement of blocks of current frame. Inter-prediction Encoding is always the main bottleneck in high-quality streaming applications. Therefore, in real-time streaming applications, dedicated hardware for executing Inter-prediction is required. In this paper, we studied a motion estimator(ME) for H.264/AVC. The designed motion estimator is based on 2-D systolic array and it connects processing elements for fast SAD(Sum of Absolute Difference) calculation in parallel. By providing different path for the upper and lower lesion of each reference data and adjusting the input sequence, consecutive calculation for motion estimation is executed without pipeline stall. With data reuse technique, it reduces memory access, and there is no extra delay for finding optimal partitions and motion vectors. The motion estimator supports variable-block size and takes 328 cycles for macro-block calculation. The proposed architecture is local memory-free different from paper [6] using local memory. This motion estimation encoder can be applicable to real-time video processing.

• The Journal of Korean Institute of Information Technology
• /
• v.15 no.12
• /
• pp.181-188
• /
• 2017

As a population of leisure activities grows and diversifies, there is a great demand for portable and environment-friendly power generation systems. A small wind power generation system is emerging as a suitable power generation equipment to meet these needs. The most important thing when developing a small portable wind turbine is to reduce the weight of the generator and increase the efficiency. The existing 300W wind turbine generator weighs about 10kg, which is heavy to carry. Therefore, a new generator weighing less than 4kg to make it easy to carry with high efficiency has been developed. In addition, considering complicated characteristics of wind volume and topography of Korea, a small wind turbine that can be used in urban and rural areas individually was constructed. Through basic designing and optimization, the lightweight and efficient generator was manufactured. It is a 300W wind turbine designed and fabricated with reduced weight as a prototype. The average output voltage of the generator was 24.7V at 900rpm no-load test. On a load test with the average line voltage 36.8V and the average phase current 2.62A, when the mechanical input was 339.84W, an average voltage output of the generator was measured as 289.5W with efficiency of 85.18%. The generator weight was 3.84kg.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.5
• /
• pp.618-629
• /
• 2021

The Fukushima nuclear power plant (NPP) accident caused by the East Japan Earthquake in 2011 and the recent increase in the frequency of earthquakes in Korea have caused safety concerns regarding radionuclide exposure. In addition, the Tokyo Electric Power Company (TEPCO) in Japan recently decided to release radionuclide-contaminated water from Fukushima's NPP into the Pacific Ocean, raising public concerns that the possibility of radionuclide contamination through both domestic- and foreign fishery products is increasing. Although many studies have been conducted on the input of artificial radionuclides into the Pacific after the Fukushima NPP accident, studies on the distribution and accumulation of artificial radionuclides in marine products from East Asia are lacking. Therefore, in this study, we attempted to explore recent research on the distribution of artificial radionuclides (e.g., ¹³⁷Cs, ^239+240Pu, ⁹⁰Sr, and etc.) in marine products from Korean seas after the Fukushima NPP accident. In addition, we also discuss future research directions as it is necessary to prepare for likely radiation accidents in the future around Korea associated with the new nuclear facilities planned by 2030 in China and owing to the discharge of radionuclide-contaminated water from the Fukushima NPP.