• Ocean and Polar Research
• /
• v.45 no.3
• /
• pp.103-111
• /
• 2023

To evaluate the impact of effluents from land-based fish farms on the coastal ocean of Wando, Korea, we analyzed inorganic nutrients, particulate organic carbon (POC), dissolved organic carbon (DOC), and colored dissolved organic matter (CDOM) in the effluent and influent of land-based fish farms during the summer (July) of 2021. The average concentrations of nutrients (Dissolved inorganic nitrogen, phosphorus, and silicate; DIN, DIP, and DSi, respectively) in the effluents of this study area were 17±3.7 μM, 1.4±0.7 μM, and 14±1.6 μM, respectively. The average concentrations of POC and DOC were 37±22 μM and 81±13 μM, respectively, with POC accounting for about 30% for total organic carbon in effluents. The Reduced Dissolved Inorganic Nitrogen/Total Dissolved Inorganic Nitrogen ratio (0.7), potential short-period index, indicates that the discharge of nutrients excreted by the fish and unconsumed feed into coastal water results in such nutrients being deposited and accumulated in the sediment. Subsequently, this continuous accumulation triggers the release of ammonium ions during organic matter decomposition, and the ammonium-enriched waters that encroach on fish farms as influent seem to be due to the diffusion of high concentrations of ammonium from bottom sediment. Furthermore, we used fluorescence indices to examine the characteristics of organic matter sources, obtaining mean values of 1.54±0.19, 1.06±0.06, and 1.56±0.06 for the humification index, biological index, and fluorescence index, respectively, in the effluent. These results indicate that the organic matters had an autochthonous origin that resulted from microbial decomposition, and such organic matters were rapidly generated and removed by biological activity, likely supplied from the sediment. Our results suggest that the effluent from land-based fish farms could be a potential source of deoxygenation occurrence in coastal areas.

• The Korean Journal of Mycology
• /
• v.48 no.3
• /
• pp.273-284
• /
• 2020

Calocybe indica is an edible mushroom commercially cultivated in India and other tropical countries. In this study, the culture characteristics and optimal conditions of milky mushroom strains were determined. The growth temperature and pH range of milky mushrooms was extensively investigated between 15-35 ℃ and pH 3-11. For efficient cultivation, 20 types of nutrient sources were selected that consisted of one of 21 types of carbon sources, 6 organic nitrogen sources, 6 inorganic nitrogen sources, 13 amino acids, 6 organic acids and 12 inorganic salts. The impact of each of the selected nutrition sources and their concentration on growth was investigated. The optimum pH and temperature were determined to be pH 6.0 and 15 ℃, respectively. The optimum concentration of medium elements for the mycelial growth of C. indica was determined to be as follows: carbon source, 2% maltose; organic nitrogen source, 1% yeast extract; inorganic nitrogen source, 0.1% NaNO₃; amino acid, 0.7% asparagine; organic acid, 0.07% acetic acid; inorganic salt, 0.07 mM MnSO₄.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.1
• /
• pp.75-89
• /
• 2009

The purpose of this study was to identify $PM_{2.5}$ sources and to estimate their contributions to the border of Yongin-Suwon area, based on the analysis of the $PM_{2.5}$ mass concentration and the associated inorganic elements, ions and carbon components. The contribution of $PM_{2.5}$ sources were estimated by using a positive matrix factorization (PMF) model to identify air emission sources. For this study, $PM_{2.5}$ samples were collected from May, 2007 to April, 2008. The inorganic elements were analyzed by an ICP-AES. The ionic components in $PM_{2.5}$ were analyzed by an Ie. The carbon components were also analyzed by DRI/OGC analyzer. After performing PMF modeling, a total of 12 sources were identified and their contributions were quantitatively estimated. The contributions from each emission source were as follows: 11.3% from oil combustion source, 3.4% from bus/highway source, 5.8% from diesel vehicle source, 4.7% from gasoline vehicle source, 8.8% from biomass burning source, 15.1 % from secondary sulfate, 5.2% from secondary nitrate source, 13.4% from industrial related source, 4.1% from Cl-rich source, 19.6% from soil related source, 1.0% from aged sea salt, and 7.4% from coal combustion source, respectively. This study provides basic information on the major sources affecting air quality, and then it will help to effectively control $PM_{2.5}$ in this study area.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.608-611
• /
• 2004

As the use of various electronic equipments has been increased recently according to industrialization and information network establishment, concern about electromagnetic wave exposed environment has also been increased. Therefore, this study aims to verify electromagnetic wave absorbing effects of inorganic paint that is made of carbon, electro-conductive materials with regard to its physical characteristics, its electromagnetic wave absorbing rate through a mock-up test for proving its effects in the indoor condition. The results are as follows: The results of running tests on electromagnetic wave absorbing inorganic paints for checking their requirements as painting material such as adherence degree, resistance to fine crack, resistance to washing, alkali-resistance, discoloration-resistance, etc. show that inorganic paints have the physical characteristics meeting the requirements for painting materials. In addition, it shows that the electromagnetic wave absorbing effect, in line with the number of paintings and the thickness of paintings, secures $75\~89\%$ of efficiency. And the mock-up test shows that the electromagnetic wave absorbing effect inside building is directly proportional to the distance from the source of electromagnetic wave such as electronic equipments.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.46-52
• /
• 2007

As flue gas desulfurization (FGD) wastewater contains high concentrations of nitrate and is very low in organic carbon, the feasibility of nitrate removal by autotrophic denitrification using Thiobacillus denitrificans was studied. This autotrophic bacteria oxidizes elemental sulfur to sulfate while reducing nitrate to elemental nitrogen gas, thereby eliminating the need for addition of organic compounds such as methanol. Owing to the unusually high concentrations of dissolved salts $(Ca^{2+},\;Mg^{2+},\;Na^+,\;K^+,\;B^+,\;SO_4^{2-},\;Cl^-,\;F^-,)$ in the FGD wastewater, extensive laboratory-scale and pilot-scale tests were carried out in sulfur-limestone reactors (1) to determine the effect of salinity on autotrophic denitrification, (2) to evaluate the use of limestone for pH control and as source of inorganic carbon for microbial growth, and, (3) to find the optimum environmental and operational conditions for autotrophic denitrification of FGD wastewater. The experimental results demonstrated that (1) autotrophic denitrification is not inhibited up to 1.8 mol total dissolved salt content; (2) inorganic carbon and inorganic phosphorus must be present in sufficiently high concentrations; (3) limestone can supply effective buffering capacity and inorganic carbon; (4) the high calcium concentration may interfere with pH control, phosphorus solubility and limestone dissolution, hence requiring pretreatment of the FGD wastewater; and, 5) under optimum conditions, complete autotrophic denitrification of FGD wastewater was obtained in a sulfur-limestone packed bed reactor with a sulfur:limestone volume ratio of 2:1 for volumetric loading rates up to 400g $NO_{3^-}N/m^3.d$. The interesting interactions between autotrophic denitrification, pH, alkalinity, and the unusually high calcium and boron content of the FGD wastewater are highlighted. The engineering significance of the results is discussed.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2008.05a
• /
• pp.134-137
• /
• 2008

• KSBB Journal
• /
• v.13 no.5
• /
• pp.491-496
• /
• 1998

The production of fibrinolytic enzyme from Bacillus subtilis BK-17 was studied in the shake flask cultures. The important medium components studied include nitrogen source, carbon source and inorganic salts. The environmental conditions include initial pH, temperature, shaking speed and working volume. Among various N-sources, C-sources and inorganic salts tested, soybean flour, D-glucose and Na2HPO4 gave the best results, and their optimal concentrations were 1.5%, 0.5% and 0.05%, respectively. The optimal pH and temperature were 9.0 and 37$^{\circ}C$. With decreasing working volume in the range of 25∼100ml in the 250ml flask or increasing shaking speed in the range of 100∼300rpm, the enzyme production was greatly enhanced. The enzyme activity under the optimal conditions was about 1400I.U./ml with urokinase as a standard.

• Analytical Science and Technology
• /
• v.6 no.3
• /
• pp.297-305
• /
• 1993

Generally, it is difficult to analyze cast iron samples with spark discharge emission spectrometry since the content of carbon in these samples is high as a few percent. The cast iron samples were analyzed with the developed glow discharge emission spectrometer composed of glow discharge emission source and polychromator. The discharge condition of glow discharge lamp(GDL) has been optimized by variation of Ar gas pressure, discharge voltage and discharge time. Under the optimum conditions obtained in this work, relationships between the measured emission intensities and concentration of two types of cast iron standard samples(BAS, LECO) were investigated. Most of elements(Mn, Si, P, S etc.) showed the good linearity in one calibration curve. And the carbon showed slightly the systematic difference according to the type of standard samples.

• KSBB Journal
• /
• v.25 no.3
• /
• pp.230-238
• /
• 2010

A microbial strain having high keratinase activity was isolated from the soil of poultry factories of Gyeonggi or Chungcheong-do. The isolated strain was identified as Bacillus sp. based on its morphological and biochemical characteristics. In this study, the optimal conditions for the production of keratinase by this strain were investigated. The optimal medium composition for the keratinase production was determined to be 3.5% chicken feather as carbon source, 1.0% tryptone as organic nitrogen source, 1.0% $KNO_3$ as inorganic nitrogen source and 0.05% KCl, 0.05% $KH_2PO_4$, 0.03% $K_2HPO_4$ as mineral source and 0.01% yeast extract as growth factor. The optimal temperature and pH was $40^{\circ}C$ and 8.5 with shaking culture (200 rpm), respectively. The maximum keratinase production reached to 123 units/ml after 42 hr of cultivation under the optimal condition. When the hair was used as the sole carbon source, the maximum enzyme activity was 88 units/ml after 120 hr and in this case, the hair added in the medium was not degraded completely but got thinner than the control by 20%.

• Journal of Mushroom
• /
• v.21 no.1
• /
• pp.15-21
• /
• 2023

Volvariella bombycinais an edible mushroom commercially cultivated in Korea and other countries. In this study, the culture characteristics and optimal growth conditions of milky mushroom strains were determined. The growth temperature and pH range of V. bombycinawas extensively investigated between 15 and 35℃ and pH 3-11. For efficient cultivation, 20 types of nutrient sources were selected, specifically, 21 carbon sources, 6 organic nitrogen sources, 7 inorganic nitrogen sources, 13 amino acids, 9 organic acids, and 13 inorganic salts. The impact of each of the selected nutrition sources and their concentration on growth was investigated. The optimum temperature and pH were determined to be 30℃ and pH 8.0, respectively. The optimum concentration of medium elements required for mycelial growth of V. bombycinawas determined to be as follows: carbon source, 0.7% Soluble starch; organic nitrogen source, 0.7% Soytone; inorganic nitrogen source, 1.0% (NH₄)₂C₄H₄O₆; amino acid, 0.1% cysteine; organic acid, 0.07% lactic acid; and inorganic salt, 0.07 mM CaCl₂.