• Journal of Environmental Science International
• /
• v.28 no.10
• /
• pp.813-829
• /
• 2019

We measured the amount of precipitation, stemflow, and throughfall and concentrations of nine major inorganic nutrients ($H^+$, ${NH_4}^+$, $Ca^{2+}$, $Mg^{2+}$, $K^+$, $Na^+$, $Cl^-$, ${NO_3}^-$, and ${SO_4}^{2-}$) to investigate the nutrient inputs into soil from precipitation in Pinus densiflora and Quercus mongolica stands from September 2015 to August 2016. The precipitation inputs of $H^+$, ${NH_4}^+$, $Ca^{2+}$, $Mg^{2+}$, $K^+$, $Na^+$, $Cl^-$, ${NO_3}^-$, and ${SO_4}^{2-}$ into soil were 0.170, 15.124, 42.227, 19.218, 14.050, 15.887, 22.391, 5.431, and $129.440kg{\cdot}ha^{-1}{\cdot}yr^{-1}$, respectively. The P. densiflora stemflow inputs were 0.008, 0.784, 1.652, 1.044, 0.476, 0.651, 1.509, 0.278, and $9.098kg{\cdot}ha^{-1}{\cdot}yr^{-1}$, and those for Q. mongolica were 0.008, 0.684, 2.429, 2.417, 2.941, 1.398, 2.407, 0.436, and $13.504kg{\cdot}ha^{-1}{\cdot}yr^{-1}$, respectively. The P. densiflora throughfall inputs were 0.042, 21.518, 52.207 27.694, 20.060, 24.049, 37.229, 10.241, and $153.790kg{\cdot}ha^{-1}{\cdot}yr^{-1}$, and those for Q. mongolica were 0.032, 15.068, 42.834, 21.219, 20.294, 20.237, 24.288, 5.647, and $119.134kg{\cdot}ha^{-1}{\cdot}yr^{-1}$, respectively. Of the total throughfall flux (i.e., stemflow + throughfall flux) of the nine ions for the two species, ${SO_4}^{2-}$ had the greatest total throughfall flux and $H^+$ had the lowest. The net throughfall fluxes of the ions for the two species had various correlations with the precedent dry period, rainfall intensity, rainfall amount, and pH of precipitation. The soil pH under the Q. mongolica canopy (4.88) was higher than that under the P. densiflora canopy (4.34). The difference in the soil pH between the two stands was significant (P < 0.01), but the difference in soil pH by the distance from the stems of the two species was not (P > 0.01). This study shows the enrichments of inorganic nutrients by two representative urban forests in temperate regions and the roles of urban forests during rainfall events in a year.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.2
• /
• pp.103-106
• /
• 1997

In order to establish a micropropagation system of Naricissus, the ability of bulblet regeneration among propagation materials was compared, and the adequate growth regulators and concentrations for each cultivar were investigated. The inorganic components were also assayed in the parts of propagation materials. In propagation materials, scape with based plates showed hightest rate of bulblet formation and rapid growth of formed bulblets in vitro, comparing to other parts of it. In comparing of varieties, 'Dutch Master' and 'Golden Harvest' showed a high ability for bulblet regeneration. The ability of bulblet regeneration was most favorable in the medium, supplemented with 5.0 mg/L BA and 2.5 mg/L NAA in 'Dutch Master', and 5.0 mg/L BA and 1.0mg/L NAA in 'Golden Harvest', respectively. In inorganic component analysis of propagation materials, the White part of scape contained 1.18 mg/L$P_2O_5$, 2.57 me Ca, 0.94 me Mg and 3.20 mg/L total N. It showed higher levels in concentration of inorganic components as compared to those of the other part of scape. In addition, leaves and yellow part of scape contained significantly high levels of Ca and Mg while scales bulb showed considerably low levels in all inorganic compounds.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.5
• /
• pp.555-560
• /
• 2014

This study investigates the effect of sodium bicarbonate ($NaHCO_3$) on growth of S.dimorphus. $NaHCO_3$ concentration was varied from 0 to 2 g-C/L. As a result, the increase in concentration of $NaHCO_3$ up to 1.5 g-C/L increased dry weight of algae. The highest specific growth rate of S. dimorphus was $0.36day^{-1}$ which was obtained at concentration of 0.5 g-C/L $NaHCO_3$. pH showed a large variation range at the concentrations lower than 0.5 g-C/L $NaHCO_3$ whereas inorganic carbon, nitrate and phosphorus removal rates were almost same at the concentrations higher than 0.5 g-C/L $NaHCO_3$ (0.75, 1, 1.25, 1.5, 2 g-C/L $NaHCO_3$). Their average inorganic carbon, nitrate and phosphorus removal rate were 70 mg-C/L/d, 11.3 mg-N/L/d, and 1.6 mg-P/L/d, respectively. Thus, $NaHCO_3$ didn't effect on inorganic carbon, nitrate and phosphorus removal rate of S. dimorphus.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.6
• /
• pp.407-411
• /
• 2000

Low-temperature solder glass for use in electronic package was experimentally prepared and its crystallization behavior was investigated using differential thermal analysis (DTA) under nonisothermal condition. The composition of the solder glass was determined from PbO-ZnO-$B_2$$O_3$-$TiO_2$ glasses containing small amounts of CaO, $SiO_2$$A1_2$$O_3$ and $P_2$$O_5$. The crystallization exotherm corresponding to the formation of lead titanate (PbTiO$_3$) was observed. The crystallization of $PbTiO_3$was a three-dimensional process with the average activation energy of 223$\pm$3 kJ/mol for the crystallization from the glass matrix.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.39-41
• /
• 2011

The recycling rate of recovered paper in Korea is the highest in the world, 92%, but remanufacturing yield is low due to the extremely poor quality of the paper. The poor quality, in turn, influences to the reject amount in deinking process. To increase the yield of old newspaper recycling process, hydrophobic degree of inorganic pigments of deinking stock must be reduced. To determine the hydrophobicity, Pitch Potential Deposit Tester (PDT) was newly designed and applied with respect to the SB latex property of various quality used in Korea; its hydrophobic degree according to Tg, gel content, charge and particle size of latex and optimum designing condition of SB latex. And below are the conclusions: 1. The reason of excessive reject from old newspaper deinking process for total amount of printed ink is loss of inorganic pigments. When lipase, a biochemical catalyst, was applied with the purpose of preventing inorganic pigments loss about more than 70% of total reject weight and promoting hydration of pulp for deinking, deinking process yield of pre flotation secondary stage increased remarkably without any changes of deinking efficiency. 2. Lipase improved deinking stock by cutting ester linkage on surface of hydrophobic materials to promote its hydration. From this, it reached the conclusion that hydration degree of stock exercises significant effect on flotation deinking process yield. 3. Inorganic alkali promotes hydration of deinking stock. But there have been needs for more fundamental measures other than inorganic alkali of promoting hydration for yield improvement. For this, this study intended to find out reasons of chemical properties change on surface of hydrophobic material by change of pH. 4. Pitch Deposit Test (PDT) was performed for understanding principle of why surface of coating flake from OMG is hydrophobic and why it becomes hydrophilic when pH of stock is alkaline. As a result of this test, it is determined that swelling property by change of pH of latex film, which were used as coating adhesive is the reason for hydrophobic change. 5. Hydrophilicity of coating flake increased with hydrophilic pigments. And as more of SB Latex adhesive was used and higher of calcium hardness of stock became, its hydrophilicity decreased. SB Latex adhesive film is reformed by mechanical friction. For having hydrophilicity under neutral pH, strong bruising action such as kneading is required. 6. Because swelling of adhesive film decreases as Tg of SB latex gets lower and mean diameter gets smaller, it shows hydrophobicity under neutral pH. This lowers hydrophilicity of coating flake, which leads to easy elimination with flotation reject on DIP process. Therefore, for improving future flotation yield, it is necessary to develop to use eco-friendly clean SB latex by raising Tg and increasing mean diameter for recycling, and as a result, to reduce excessive loss of coating flake as a reject from deinking process.

• Environmental Engineering Research
• /
• v.20 no.4
• /
• pp.347-355
• /
• 2015

The growth kinetics of phototrophic microorganisms can be controlled by the light irradiance, the concentration of an inorganic nutrient, or both. A multi-component kinetic model is proposed and tested in novel batch experiments that allow the kinetic parameters for each factor to be estimated independently. For the cyanobacterium Synechocystis sp. PCC6803, the estimated parameters are maximum specific growth rate $({\mu}_{max})=2.8/d$, half-maximum-rate light irradiance $(K_L)=11W/m^2$, half-inhibition-rate light irradiance $(K_{L,I})=39W/m^2$, and half-maximum-rate concentration for inorganic carbon $(K_{S,Ci})=0.5mgC/L$, half-maximum-rate concentration for inorganic nitrogen $(K_{S,Ni})=1.4mgN/L$, and half-maximum-rate concentration for inorganic phosphorus $(K_{S,Pi})=0.06mgP/L$. Compared to other phototrophs having ${\mu}max$ estimates, PCC6803 is a fast-growing r-strategist relying on reaction rate. Its half-maximum-rate and half-inhibition rate values identify the ranges of light irradiance and nutrient concentrations that PCC6803 needs to achieve a high specific growth rate to be a sustainable bioenergy source. To gain the advantages of its high maximum specific growth rate, PCC6803 needs to have moderate light illumination ($7-62W/m^2$ for ${\mu}_{syn}{\geq}1/d$) and relatively high nutrient concentrations: $N_i{\geq}2.3 mgN/L$, $P_i{\geq}0.1mgP/L$, and $C_i{\geq}1.0mgC/L$.

• Animal Bioscience
• /
• v.35 no.11
• /
• pp.1725-1732
• /
• 2022

Objective: This study was conducted to investigate the effects of selenium benefits on the physiological responses, litter performance, blood profiles and milk composition of lactating sows and tissue concentration of their progeny when mixed form of selenium was provided in a lactation diet. Methods: A total of 45 multiparous sows (Yorkshire×Landrace) with similar body weight, backfat thickness, and parity were assigned to one of three treatments with 15 sows per treatment in a completely randomized design. Organic and inorganic selenium were mixed and added to the diet at 0.15 ppm and 0.25 ppm, respectively. A non-Se-fortified corn-soybean meal basal diet served as a negative control. Treatments were as follows: i) Control: corn-soybean meal based diet, ii) ISOS15: control+ inorganic Se 0.15 ppm+organic Se 0.15 ppm, iii) ISOS25: control+inorganic Se 0.25 ppm+organic Se 0.25 ppm. Results: Serum selenium concentrations of sows and piglets were increased by the supplemental Se mixture at 7 days of lactation compared with the control (p<0.01, respectively). The kidney and muscle selenium concentrations of piglets were increased by the supplemental Se mixture at 21 days of lactation compared with the control (p = 0.03; p = 0.04, respectively). Conclusion: Consequently, supplementation with mixed inorganic and organic selenium in a lactating diet could improve the selenium status of sows and piglets; no differences were observed among the mixing levels.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.4.1-4.1
• /
• 2009

The dream of futurists andtechnologists is to build complex, multifunctional machines so small that theycan only be seen with the aid of a microscope. The unprecedented technologyadvancements in miniaturizing integrated circuits on semiconductors, and theresulting plethora of sophisticated, low cost electronic devices demonstratethe impact that micro/nano scale engineering can have when applied only to thearea of electrical and computer engineering. Emerging research efforts indeveloping organic and inorganic nano materials together with using micro/nanofabrication techniques for implementing integrated multifunctional devices hopeto yield similar revolutions in other engineering fields. By cross linking theindividual engineering fields through micro/nano technology, various organicand inorganic materials and miniaturized system devices can be developed thatwill have future impacts in the IT and life science applications. Yet to buildthe complex micromachines and nanomachine of the future, engineering will needto develop the technology capable of seamlessly integrating these materials andsubsystems together at the micro and nano scales. The micromachines of thefuture will be “integrated nanosystems,” complex devices requiring the integration of multiple materials,phenomena, technologies, and functions at the same platform. To develop thistechnology will require great efforts in materials science and engineering, infundamental and applied sciences. In this talk, we will first discuss thenature of micro and nanotechnology research for IT and life sciences, and thenintroduce selected current activities in micro and nanotechnology research fororganic and inorganic materials and devices. The newly developed micro/nanofabrication processes and devices, combined with in-depth scientificunderstandings of materials, can lead to rapid development of next generationsystems for applications in IT and life sciences.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.5
• /
• pp.37-44
• /
• 2014

The physical, mechanical and freezing and thawing properties of non cement porous vegetation concrete using non-sintering inorganic binder have been evaluated in this study. Four types of porous vegetation concrete according to the binder type is evaluated. The pH value, void ratio, compressive strength, repeated freezing and thawing properties were tested. The test results indicate that the physical, mechanical and repeated freezing and thawing properties of porous vegetation concrete using the non-sintering inorganic binder is increased or equivalent compared to the porous vegetation concrete using the blast furnace slag + cement and hwang-toh + cement binders. Also, Vegetation monitoring test results indicate the porous vegetation concrete using the non-sintering inorganic binder have increasing effects of vegetation growth.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.1
• /
• pp.100-104
• /
• 1994

KTP seed crystals were grown by the hydrothermal method and the properties of grown crystals were investigated by means of infrared spectrophotometer. The hydrothermal conditions for high growth rates of seed crystals are as follows: temperature ranges, between , $430 and 450^{\circ}C $ ; hydrothermal solvent, 4m KF solution ; temperatures difference, $30<{\triangle}T<65^{\circ}C$ ; filling %, 65% ; growth method, vertical temperature gradient method. Under these conditions, morphologies of the grown KTP single crystals tended to be bounded by (100), (011) and (201) faces and hydroxyl groups were observed in the grown crystals.