• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.930-937
• /
• 2008

From the result of precise field investigation and stability analysis for the cut slope, following results were acquired. 1. The cause of the collapse of cut slope came from circle sliding collapse by fault zone which remained inner weathering zone. 2. The existing destructed soil and rock can be removed by reinforcement. And to prevent the additional destruction, it is judged that applying the method after relaxing the slope would be reasonable. 3. To make cut slope stable, soft rock layer should be done cutting 1:1.5 and 1:2.0 ~ 1:2.5 for weathered rock and soil layer. 4. Heavy water leakage section should be applied horizontal drain method so that water pressure should not act to the cut slope.

• 미래기술융합논문지
• /
• 제3권2호
• /
• pp.25-31
• /
• 2024

최근 정보통신 기술로 인해 산업화되고 발달됨에 있어, 현대사회의 현대 여성들은 수많은 스트레스로 육체적, 정신적 건강에 노출되어 있다. 대중적으로 발생하는 염증들은 유산균이 감소되거나 잦은 항생제 복용 및 면역력 저하의 원인이 대표적이다. 도움이 되며 반영되는 제품 개발이 필요하다. 현재 시중에 소개되고 있는 이너케어젤은 유익균을 증가시키고 건강한 y존을 유지할수 있다. 이너 젤 속에는 하이드로젤 성분이 함유되어있다. 90%가 물로 이루어져 있고 그 외에 성분은 물을 지지하는 지지체로서의 역할을 수행하며, 고분자 사슬간의 가교결합을 통해 형성된다. HEC(hydroxyethyl cellulose)는 셀룰로오스의 하이드록시에칠에 텔이다. 사용목적은 결합제, 유화안정제, 점도증가제(수성), 피막형성제 역할을 한다. CA (crosslinker)는 가교제이며, 결합시켜주는 역할을 한다. 미용분야의 하이드로젤은 얇은 피막형성으로 피부를 부드럽게 감싸주는 피막형성제 역할을 하고, 다른 원료들이 분리되지 않도록 도움을 주는 유화안정제 역할을 한다. 또한, 화장품에 점성을 높여 점도를 개선시키는 점증제 역할을 한다. 또한, 바이오 분야에서는 포도당 감시, 간호관리, 세포이식 및 상처 치료에도 사용되어지고 있다. 현재로서는 기능성 하이드로젤을 이용한 제품은 나오지 않은 것으로 파악되어 있어 본 연구에서는 기능성 하이드로젤 항균성을 알아보기 위해 Y존 케어 하이드로젤 솔루션 제조를 수행하였으며 새로운 솔루션 개발을 목적으로 한다. 결과적으로 Y존에 적절한 Ph를 맞추었음을 확인하였고, PDB배지에 칸디다 알비칸균 배양 후 Y존 케어 하이드로젤솔루션 세가지 제품 모두 0.5~1.0mm의 항균력 효과를 보았다.

• 자원환경지질
• /
• 제21권3호
• /
• pp.209-221
• /
• 1988

The ore deposit of the Ohtani mine is one of repesentatives of plutonic tungsten-tin veins related genetically to acidic magmatism of Late Cretaceous in the Inner zone of Southwest Japan. Based on macrostructures of vein filling on the order of ore body, three major mineralization stages, called stage I, stage II, and stage ill from earliest to latest, are distinguished by major tectonic breaks. The alteration zories are characterized by specific mineral associations in pseudomorphs after biotite. The alteration zones can be divided into two parts, i. e. a chlorite zone and a muscovite zone, each repesenting mineralogical and chemical changes produced by the hydrothermal alteration. The chloritic alteration took place at the beginning of mineralization, and muscovite alteration in additions to chloritic alteration took place at stage II and ill. The alteration zones are considered to be formed by either of two alteration mechanism. 1) The zones are formed by reaction of the rock with successive flows of solution of different composition and different stage. 2) The zones are formed contemporaneously as the solution move outward. Reaction between the solution and the wall-rock results in a continuous change in solution chemistry. The migration of the successive replacement of the fresh zone$\rightarrow$the chlorite zone$\rightarrow$the muscovite zone may have transgressed slowly veinward, leaving metasomatic borders between the different zones.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제18권2호
• /
• pp.77-82
• /
• 2009

The egg shell of the tropical tasar silkworm, Antheraea mylitta is formed from the substances secreted by the follicular epithelium during the late vitellogenic stage. TEM study reveals the inner travecular and outer lamellar layer of chorion. The travecular layer is composed of the innermost wax layer, inner and outer chorionic layer. The inner and outer chorionic layers are connected to each other by vertical pillers forming of cavities. The lamellar layer is perforated by the aeropyles. SEM study reveals the differentiation of an anterior surface of the egg shell into four zones-micropylar, edge, aeropyles crown and disc zone. In the mycosis infected eggs the aeropyles and egg-shell surface are fully packed with the hyphae of the fungus, Aspergillus sydowi blocking of plastron respiration and causing the death of developing embryo so that mycosis infected eggs become sterile.

• 대한본초학회지
• /
• 제37권6호
• /
• pp.53-59
• /
• 2022

Objectives : Cleanser is the most basic tools used in daily skin care. I made a cold process soap using Castanea crenata inner shell (CCIS). I'd like to study the effect of face wash using CCIS cold process (CP) soap on the skin. Methods : The same water and towel were used at the same place in order to examine the skin change state immediately before and after washing face. The skin test was performed before and after 10 minutes washing the face in order to remove these external environmental factors, such as lifestyle, alcohol, tobacco, and stress etc. As a control group, the cases of washing with water and foam cleanser (F/C), which is a popular commercial product, were set. Three cases were compared and analyzed. Results : In the case of water washing, there was a significant decrease in oil (U-zone) but that was not good effect. In the case of F/C and CCIS washing, there were significant decrease in oil (T-zone), pores and pigmentation, but the significance was bigger in CCIS washing. In the case of pores, there was a significant decrease in all three cases. Conclusion : In the case of F/C and CCIS washing, it showed the effect of reducing T-zone oil, pores and pigmentation. But the significance was greater in CCIS case than in F/C case. CCIS cp soap is considered as a form of face wash that is suitable for skin care.

• 한국주조공학회지
• /
• 제14권6호
• /
• pp.566-575
• /
• 1994

The effects of varying the pouring temperature and the die preheating temperature in producing centrifugally cast HP alloy modified with Nb was evaluated on the basis of the resultant macrostructure, microstructure and hardness of these castings. Increased die preheating temperatures and pouring temperatures resulted in an increase in the thickness of the columnar dendritic zone, the primary and secondary dendrite arm spacing and the thickness of the zone of porosity at the casting I.D.(inner diameter). Lower die preheating temperature and pouring temperatures result in increased grain fineness and an increased zone of equiaxed grains. A higher hardness was achieved toward the casting O.D.(outer diameter) compared to the casting I.D., attributable to alloy segregation toward the casting I.D. and segregation differences resulting from reduced solidification cooling rates toward the casting I.D. Also, a higher hardness was realized at the cold end of the casting attributed to a more uniform distribution of carbides.

• Animal cells and systems
• /
• 제3권2호
• /
• pp.187-191
• /
• 1999

The distribution of glucagon-immunoreactive cells in the pancreas during various developmental stages (fetus, neonate, 1-month-old, 6-month-old and adult) of the Korean native goat was investigated by immunohistochemical methods. The varying distribution and frequency of glucagon-immunoreactive cells in the pancreas of the Korean native goat were observed. The glucagon-immunoreactive cells were detected in both exocrine and endocrine portions (pancreatic islets) at all developmental stages and also in ducts of the 6-month-old and adult. The relative frequencies of glucagon-immunoreactive cells increased in the pancreatic islets and ducts with age, but decreased in the exocrine portions. Generally, they were distributed in the interacinar spaces or marginal zone of the pancreatic islets during all stages of development. However, the cell distributions of the pancreatic islets in the neonate divided into two types: 1) ones which were distributed in the inner zone, and 2) others in the peripheral zone.

• 한국정보처리학회논문지
• /
• 제6권11호
• /
• pp.3116-3123
• /
• 1999

Current disk systems are generally designed to reduce read traffic more effectively. Hence, write traffic of the I/O workload could potentially become a bottleneck of the disk system performance. In order to overcome this problem without much cost, this paper presents using outermost-zone track of multi-zoned recording disk as a secondary disk cache. The proposed disk cache improves the disk system performance by following exploitations: speed difference between block transfer and track transfer, difference in transfer rate between outermost-zone tracks and inner tracks, reduction in the seek time caused by decreasing the number of disk cache tracks, and idle period during burst accesses. In addition, it does not waste the disk space because it allocates the caching space by the cylinder unit. The simulation results show that the proposed system improves 2.54∼3.11 times better in terms of average response time for write operations than existing disk systems..

• 대한기계학회논문집
• /
• 제16권7호
• /
• pp.1314-1321
• /
• 1992

본 연구에서는 중실형의 해석을 확장하고 유선함수와 상계해법을 이용하여 일 반적 경계역을 갖는 관형압출의 체계적 해석법을 연구해서 보다 정확한 압출하중의 예 측 뿐아니라 소성변형역 및 소성유동도 예측 가능한 방법을 제안하고자 한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 추계학술대회논문집
• /
• pp.14-17
• /
• 1999

The finite element formulation is developed for predicting strain distributions and weld line movements in the forming processes of laser welded blank. The welded zone(WZ) is modelled with several narrow finite elements whose material characteristics are analytically obtained from those of base metals based on the tensile tests. In order to show the reliability and effectiveness of weld element the forming process of hemispherical dome stretching and auto-body door inner panel stamping are simulated FEM predictions show good agreements with experimental observations.