• Design & Manufacturing
• /
• 제14권4호
• /
• pp.65-70
• /
• 2020

Partial reinforcement of sheet metal parts with CFRP patch is a technology that can realize ultra-lightweight body parts while overcoming the high material cost of carbon fiber. Performing these patchworks with highly productive press equipment solves another issue of CFRP: high process costs. The A-pillar is the main body part and has an undercut shape for fastening with other parts such as roof panels and doors. Therefore, it is difficult to bond CFRP patches to the A-pillar with a general press forming tool. In this paper, a flexible system that applies uniform pressure to complex shapes using ceramic particles and silicone rubber is proposed. By benchmarking various A-pillars, a reference model with an undercut shape was designed, and the system was configured to realize a uniform pressure distribution in the model. The ceramic spherical particles failed to realize the uniform distribution of high pressure due to their high hardness and point contact characteristics, which caused damage to the CFRP patch. Compression equipment made of silicone rubber was able to achieve the required pressure level for curing the epoxy. Non-adhesion defects between the metal and the CFRP patch were confirmed in the area where the bending deformation occurred. This defect could be eliminated by optimizing the process conditions suitable for the newly developed flexible system.

• 한국의류산업학회지
• /
• 제23권2호
• /
• pp.261-272
• /
• 2021

The purpose of the present study was to evaluate the thermal insulation of air-filled winter jackets according to the amount of air-filler using a thermal manikin. The insulation of these jackets' was compared to a down padded jacket with an identical design and size. The amounts of air-filler were 100% (26,219 cm³), 70% (18,645 cm³), 50% (13,110 cm³), and 0% (0 cm³). The results showed that a clothing insulation (Icl) of 0%, 50%, 70%, and 100% air, and 100% down jackets was 0.208, 0.243, 0.207, 0.176, and 0.315 clo, respectively. In addition, the down jacket with waisttaped had a clothing insulation of 0.369 clo. However, the highest value of clothing insulation per clothing weight was the 50% air-filled jacket in all conditions. In terms of regional power consumption of the thermal manikin, the down jacket consumed less power for the shoulder and chest than the air-filled jackets. In conclusion, in order to maximize the thermal insulation of air-filled jackets, an optimal amount of air-filler, that is, an amount which does not compromise (break) the layer of inner air between the surface of manikin and the lining of the jacket, should be explored. Further studies on lining materials, end-closed design, and changes in thermal insulation under the conditions of strong wind or heavy snow are recommended.

• 대한본초학회지
• /
• 제29권4호
• /
• pp.61-67
• /
• 2014

Objectives : To present a differential standard of Armeniacae Semen and Persicae Semen that are easily confused. Methods : It was planed a differential standard form through outer appearance of the original plant, outer appearance in the form of each medicines and the appearance of the interior form through a microscope for each samples. Using an standard compound amygdalin, each samples have been analyzed by HPLC and TLC. Results : It was possible to distinguish the orignal plant between Armeniacae Semen and Persicae Semen through its leaf shape and calyx type. In Outer appearance in the form of each medicines, there was no difference pre-existing method(measuring length and width). In vascular pattern of the surface, however, there was a clear difference that Armeniacae Semen was developed more reticulated branches than Persicae Semen. In appearance through a microscope, it has not been possible to find a clear difference in the per original plant. However, there was a clear difference between Armeniacae Semen(1 layer) and Persicae Semen(3 layer) in inner albubemen cell. In TLC analysis, there was no difference in the pattern between samples. But in HPLC analysis, Armeniacae Semen showed amygdalin content higher on average. Conclusions : It will be possible to find various differences in the outer appearance of the original plant, the outer appearance in the form of each medicines, the appearance of the interior form through a microscope and physical and chemical research component.

• 한국기계가공학회지
• /
• 제20권11호
• /
• pp.121-126
• /
• 2021

In this study, the effect of thermal contact resistance between pin-channel tubes on the heat transfer characteristics was analytically examined around the channel tubes with the pins attached to two consecutive arranged channel pipes. The numerical results showed that the heat transfer coefficient decreased geometrically as the thermal contact resistance increased, and the corresponding temperature change on the contact surface increased as the thermal contact resistance increased. The thinner the pin, the more pronounced the geometric drop in the heat transfer coefficient. It was confirmed that the higher the height of the pin, the higher was the heat transfer coefficient, however, the greater the size of the thermal contact resistance, the smaller was the heat transfer coefficient. It was found that the temperature change in the inner wall of the channel tube did not significantly affect the heat transfer characteristics owing to the thermal contact resistance. Furthermore, the velocity of air at the entrance of the channel tube was proportional to the heat transfer coefficient due to a decrease in the convective heat resistance corresponding to an increase in the flow rate.

• 한국어류학회지
• /
• 제34권2호
• /
• pp.119-126
• /
• 2022

본 연구는 동중국해에서 수집한 치어(체장 5.2 mm)의 종을 COI 바코딩을 통해 남방표문쥐치(Naso hexacanthus)로 동정하고, 형태를 처음으로 보고한다. 치어는 마름모꼴의 몸통으로 등지느러미와 뒷지느러미의 첫 극조는 길고 톱니가 나 있었다. 뒷지느러미 기저부에 네 개의 흑색소포, 미병부에 밀집한 흑색소포, 뇌 표면에 퍼져 있는 흑색소포가 있었다. 작은 가시 한 개가 각각 콧등과 눈 뒤에 있었고, 톱니 모양의 돌기가 머리, 눈 위, 전새개골 내부와 외부, 새개골 아래와 옆 부분에 발달하였다. COI 바코딩으로 동정한 남방표문쥐치 치어의 형태적 특징은 치어의 종 동정에 유용할 것이다.

• 한국추진공학회지
• /
• 제26권1호
• /
• pp.1-11
• /
• 2022

가스터빈에서 연료는 분사기를 통해 연소기에 공급될 때까지 고온 환경에 노출된다. 탄화수소 연료는 고온 조건에서 코킹이 발생하여 코킹 물질이 연료관에 퇴적되거나 분사기 통로를 막을 수 있다. 본 연구에서는 가스터빈 내부에 위치한 연료관을 모사한 시편과 Jet A-1을 전기적인 장치들을 이용해 가열하였다. 스테인리스강 시편의 벽면 온도와 시편에 공급되는 Jet A-1의 온도를 변화시키며, Jet A-1 코킹시험을 수행하였다. 코킹이 발생한 시편들을 절단한 후 코킹 물질과 내부 표면을 에너지 분산 X-선 분석기와 전계방사형주사전자현미경을 통해 분석하였다.

• Journal of Animal Science and Technology
• /
• 제65권2호
• /
• pp.401-411
• /
• 2023

Many studies have been conducted to improve technology for semen cryopreservation in pigs. However, computer-assisted analysis of sperm motility and morphology is insufficient to predict the molecular function of frozen-thawed semen. More accurate expression patterns of boar sperm proteins may be derived using the isobaric tags for relative and absolute quantification (iTRAQ) technique. In this study, the iTRAQ-labeling system was coupled with liquid chromatography tandem-mass spectrometry (LC-MS/MS) analysis to identify differentially expressed CM10-fractionated proteins between fresh and frozen-thawed boar semen. A total of 76 protein types were identified to be differentially expressed, among which 9 and 67 proteins showed higher and lower expression in frozen-thawed than in fresh sperm samples, respectively. The classified functions of these proteins included oxidative phosphorylation, mitochondrial inner membrane and matrix, and pyruvate metabolic processes, which are involved in adenosine triphosphate (ATP) synthesis; and sperm flagellum and motile cilium, which are involved in sperm tail structure. These results suggest a possible network of biomarkers associated with survival after the cryopreservation of Duroc boar semen.

• 한국임상수의학회지
• /
• 제39권6호
• /
• pp.319-325
• /
• 2022

Two-port laparoscopic ovariectomy (Lap-OVE) has been performed in small dogs, using 3-mm and 5-mm portal sites, and is associated with reduced surgical stress and postoperative pain. However, extension of the incision is often needed to extract the ovaries. In this study, we aimed to minimize invasiveness by using smaller-sized cannulas as well as a novel technique for ovary extraction. Lap-OVE was performed on six, healthy female dogs (range, 3 to 7.2 kg) using two 3-mm midline portals. The middle finger of a size M nitrile glove was cut at its base and sterilized preoperatively. The ovary was suspended at the body wall using a 1-0 blue nylon needle, and the ovarian pedicle and ligaments were transected using a 3-mm bipolar forceps. To facilitate the glove passing through the 3.9-mm port, it was turned inside out to expose the smooth inner surface, before being inserted into the abdominal cavity with an applicator. Both ovaries were placed inside, and the mouth of the glove was exteriorized through the port with a laparoscopic grasping forceps. The ovaries were morcellated inside the glove, using Adison-Brown tissue forceps and iris scissors, which enabled safe extraction without incision enlargement. Median incision lengths were 4.3 mm (3.5-mm cranial cannula) and 4.8 mm (3.9-mm caudal cannula). An advantage of this procedure was that there was no need for skin sutures. In conclusion, using our novel technique, sutureless Lap-OVE was possible in small dogs using two 3-mm portal sites without additional incision.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1855-1862
• /
• 2023

Graphite crucibles are used for melting uranium and its alloys in VIM furnace. Various coating materials namely Al₂O₃, ZrO₂, MgO etc. are applied on the inner surface of the crucibles using paint brush or thermal spray technique to mitigate U-C interaction. These leads to significant amount of carbon pick-up in uranium. In this study, the attempts are made to develop multilayer coatings comprising of SiC/Y₂O₃ and Mo/Y₂O₃ on graphite to study the feasibility of minimizing U-C interaction. The parameters are optimized to prepare SiC coating of about 70㎛ thickness using CVD technique on graphite coupons and subsequently Y₂O₃ coating of about 250㎛ thickness using plasma spray technique. Molybdenum and Y₂O₃ layers were deposited using plasma spray technique with 70㎛ and 250㎛ thickness, respectively. Interaction studies of the coated graphite with molten uranium at 1450℃ for 20 min revealed that Y₂O₃ coating with SiC interlayer provides physical barrier for uranium-graphite interaction, however, this led to the physical separation of coating layer. Y₂O₃ coating with Mo interlayer provided superior barrier effect showing no degradation and the coatings remained intact after interaction tests. Therefore, the Mo/Y₂O₃ coating was found to be a promising solution for minimizing carbon pick-up during uranium/uranium alloy melting.

• 열처리공학회지
• /
• 제36권6호
• /
• pp.351-358
• /
• 2023

Bearings are mechanical components that support loads and transmit rotation. The inner and outer rings come into contact with the rotating mechanism, requiring a very high level of hardness. To meet this requirement, heat treatment is commonly performed. The heat treatment process inherently involves thermal deformation. Particularly in the case of large bearings, significant deformation relative to the bearing's shape can occur, making accurate deformation prediction during heat treatment essential. However, predicting deformation in heat treatment is challenging due to the simultaneous consideration of phase transformation, heat transfer, and bearing deformation. In this study, an analysis of heat treatment-induced deformation in bearings was conducted, taking phase transformation into account. The thermal and mechanical properties were calculated based on the chemical composition of the bearing material. This information was then used to perform a deformation-heat transfer-phase transformation analysis. To validate the reliability of the analysis, experiments were conducted under the same conditions. When comparing the analysis and experimental results, differences in deformation were observed. These differences were attributed to variations in phase transformation conditions between the analysis and experiments. Consequently, it is anticipated that supplementing these results will enable the prediction of deformation while considering phase transformation conditions in bearings.