• Restorative Dentistry and Endodontics
• /
• v.24 no.4
• /
• pp.623-627
• /
• 1999

During canal instrumentation of a curved canal, restoring force of endodontic instrument remove more dentin from the inner wall of the curvature. This effect tends to straighten the canal and thus may significantly shorten the working length. This study was to determine the mean reduction in working length after instrumentation according to the curvature. The curvature of mandibular mesial root was determined before instrumentation. 30 canals were divided into 3 groups each 10 on the basis of degree of curvature. Experimental groups as follows. In group 1, canals having curvature from 15 to 20 degrees: in group 2, canals having curvature from 20 to 30degrees; in group 3, canals having curvature above 30 degrees. Experimental teeth in all groups were accessed, and their actual working length determined by passing a size 15 K-file(IAF) just through the minor apical foramen. The canals were sequentially enlarged to size 35 with ProFile .06 series. The change of working length was calculated by measuring the tip of IAF beyond apical foramen by using stereomicroscope. The change of canal curvature following instrumentation were measured using the Schneider technique. The results were as follows. 1. The greatest changes of curvature and working length were observed in the group 3 canals(P<0.05), next were group 2 canals and group 1 canals(P>0.05). 2. Group 1 canals showed a mean reduction in 1.61 degrees and length of 0.12m respectively(P>0.05). 3. Group 2 canals showed a mean reduction in 3.42 degrees(P<0.05) and length of 0.25mm(P>0.05) respectively. 4. Group 3 canals showed a mean reduction in 7.23 degrees(<0.05) and length of 0.64mm respectively(P<0.05).

• Animal Bioscience
• /
• v.35 no.9
• /
• pp.1303-1313
• /
• 2022

Objective: The current study aimed to perform whole-genome resequencing of Chinese indigenous Mongolian sheep breeds including Ujimqin, Sunit, and Wu Ranke sheep breeds (UJMQ, SNT, WRK) and deeply analyze genetic variation, population structure, domestication, and selection for domestication traits among these Mongolian sheep breeds. Methods: Blood samples were collected from a total of 60 individuals comprising 20 WRK, 20 UJMQ, and 20 SNT. For genome sequencing, about 1.5 ㎍ of genomic DNA was used for library construction with an insert size of about 350 bp. Pair-end sequencing were performed on Illumina NovaSeq platform, with the read length of 150 bp at each end. We then investigated the domestication and signatures of selection in these sheep breeds. Results: According to the population and demographic analyses, WRK and SNT populations were very similar, which were different from UJMQ populations. Genome wide association study identified 468 and 779 significant loci from SNT vs UJMQ, and UJMQ vs WRK, respectively. However, only 3 loci were identified from SNT vs WRK. Genomic comparison and selective sweep analysis among these sheep breeds suggested that genes associated with regulation of secretion, metabolic pathways including estrogen metabolism and amino acid metabolism, and neuron development have undergone strong selection during domestication. Conclusion: Our findings will facilitate the understanding of Chinese indigenous Mongolian sheep breeds domestication and selection for complex traits and provide a valuable genomic resource for future studies of sheep and other domestic animal breeding.

• Development and Reproduction
• /
• v.10 no.2
• /
• pp.93-96
• /
• 2006

The total length, head length, head height, eye diameter, retina thickness, and lens diameter of the dotted gizzard shad, Konosirus punctatus, showed positive allometric relationships between hatching and 30 days post-hatching (dph). The increase in total length relative to head length and head height, head length growth relative to eye and lens diameter, head height growth relative to eye diameter and lens diameter, and thickness of the retina relative to eye diameter, lens diameter, head length, and head height were showed allometric relationships. The eyes were formed completely at 9 dph. At this age, the eye has a lens, an optic nerve fiber layer, a ganglion cell layer, an inner plexiform layer, an inner nuclear layer, an outer plexiform layer, an outer nuclear layer, an outer limiting membrane, a rod and cone layer, and an epithelial layer. The essential demands that must be met by the retina in this species pertain to light sensitivity and spatial resolution.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.5
• /
• pp.480-485
• /
• 2003

Morphology of the spermatozoa from the testes of the catfish (Pseudobagrus brevicorpus) was studied by transmission and scanning electron microscopy. The spermatozoa of P. brevicorpus are approximately $82.25\pm0.06\;{\mu}m$ in length and relatively simple cells composed of a spherical head, a short midpiece and a tail as in most teleost fish, The nucleus measuring about $2.00\pm0.02\;{\mu}m$ in length is depressed with a deep nuclear fossa of about $1.05\pm0.03\;{\mu}m$ in length three fifths of the nuclear length. The nuclear fossa contains the proximal and distal centrioles. The two centrioles are oriented approximately $150^{\circ}$ to each other. The mitochondria are arranged in two layers and their number is 12 or more. They are separated from the axoneme by the cytoplasmic canal. The axoneme is the 9+2 microtubular pattern and has inner but no outer dynein arms as in other bagrids. The axonemal fins were the closed to axonemal doublet 3 and 8. The axonemal fins and lost outer dynein arm are shared in Bagridae and the deep nuclear fossa is shared in Siluriformes. The axonemal fins observed in Bagridae and Amblycipitidae of Siluriformes might be the apomorphic character in Ostariophysi.

• Journal of Welding and Joining
• /
• v.6 no.2
• /
• pp.19-29
• /
• 1988

This paper reports on the elatic-plastic analysis and fracture behavior of cylinder with outer surface crack which is under external or internal pressure. For the studuty of crack length effects in cylinder, ratios of crack lengths to finite thickness (a/t) are dertermined 0.3, 0.4, 0.5. For the study of curvature effects in cylinders, ratios of mean diameter to finite thicknees (Rm/t) are determined 10.0, 15.0, 20.0. Analysis is conduceted using the theory of fracture mechanics and two dimensional finite element solution assuming the axi-symmetrical plane strain conditon. Main results of this study are as follows. 1) It is known from this paper that elastic-plastic strain is initiated near crack tip and enlarged between crack tip and inner side of cylinder. 2) $K_{1}$ of cylinder under external or internal pressure is evaluated memebrane stress .root..pi.* crack length. The results of this study are inclined to Lomacky's results and Kobayshi's result. 3) Distribution of stress near crack tip is looked higher than of other zone, as crack length of equal model is longer, and as diameter of cylinder is longer. 4) When other conditions are equal, displacemenet near crack tip is looked duller, as length is longer.

• International Journal of Aeronautical and Space Sciences
• /
• v.4 no.1
• /
• pp.26-33
• /
• 2003

Recess is a geometrical configuration shape that the exit surface of an inner injector is located at a certain length inward from that of an outer injector. It is known to have the characteristics that it can augment mixing efficiency and flame stabilization through internal mixing of propellant in it. So, various experiments, such as backlit stroboscopic photography, phase Doppler particle analyzer(PDPA) and mechanical patternator, were performed at several recess lengths to grasp its effect on the spray characteristics of spray angle, breakup length, atomization and' mixing. Recess length was normalized to dimensionless recess number and two principal mechanisms of impingement and swirl recovery were introduced to explain its influence on the spray characteristics. The effect of recess on SMD doesn't appear significantly near the recess number where mixing efficiency attains to the maximum, whereas mass distribution and mixing efficiency are changed considerably. Thus, it can be inferred that a certain optimum recess number exists, where mixing efficiency becomes the maximum.

• Journal of Species Research
• /
• v.13 no.2
• /
• pp.185-254
• /
• 2024

Sixteen species of Asterocheres collected from the southern and eastern coasts of Korea are recorded. Two species are redescriptions-Asterocheres aesthetes Ho, 1984 and A. siphonatus Giesbrecht, 1897. The remaining 14 new species described are A. geminus n. sp., A. processus n. sp., A. culicis n. sp., A. eurychelatus n. sp., A. scutellatus n. sp., A. spiniventer n. sp., A. fici n. sp., A. serratus n. sp., A. tridentatus n. sp., A. nodulosus n. sp., A. tetraodontis n. sp., A. dokdoicus n. sp., A. exilis n. sp., and A. zodius n. sp. These new species are compared with other known species of the genus mainly based on the character states of 17 selected characters. These characters include the length/width ratios of the caudal ramus and genital double-somite, the number of postgenital lateral setules or spinules on the genital double-somite of the female, the number of segments of the antennule of both sexes, the position of aesthetasc on antennular segments in the female, the relative length of terminal claw of the antenna, the relative length of the oral siphon, the number of segments and the relative length of the mandibular palp, the presence or absence of inner coxal seta on legs 1 and 4, the relative lengths of setae on the exopod of female leg 5, the presence or absence of sexual dimorphisms of swimming legs, and the presence or absence of a secondary aesthetasc on the male antennule. A key to 22 species of Asterocheres known in Korea waters is provided.

• Korean Journal of Veterinary Research
• /
• v.36 no.1
• /
• pp.247-254
• /
• 1996

Serial ultrasonographic examinations were performed on 9 pregnant Korea Jin-do dog from days 15 to 60 to determine the size of gestational structures throughout pregnancy. Gestational age was timed from the day of ovulation (Day 0), which was estimated to occur when plasma progesterone concentration was first increased above 4.0 ng/ml. Extra-fetal structures were measureable from days 17 to 49. Outer uterine diameter increased from $7.0{\pm}0.7$ ($mean{\pm}SD$)mm at day 17 to $54.0{\pm}2.2mm$ at day 49 and inner chorionic cavity diameter increased from $3.0{\pm}0.7mm$ at day 17 to $37.5{\pm}0.6mm$ at day 49. Uterine wall thickness increased from $2.8{\pm}0.4mm$ at day 17 to $8.3{\pm}0.5mm$ at day 49, placental thickness increased from $1.0{\pm}0.1mm$ at day 22 to $5.7{\pm}0.2mm$ at day 49 and length of chorionic cavity or zonary placenta increased from $5.5{\pm}1.3mm$ at day 20 to $52.3{\pm}2.2mm$ at day 49. Inner chorionic cavity diameter, outer uterine diameter and placental length each increased at a linear rate through day 37, after which time, each had a marked plateau in growth. Of the extra-fetal structures, inner chorionic cavity diameter was the most accurate for estimation of gestational age until day 37. Fetal structures were measureable from days l7 to 60. Crown-rump length, increased from $3.0{\pm}0.7mm$ at day 22 to $118.7{\pm}3.1mm$ at day 49, fetal body diameter increased from $4.0{\pm}0.7mm$ at day 25 to $55.8{\pm}1.7mm$ at day 60 and fetal head diameter increased from $4.3{\pm}0.6mm$ at day 26 to $29.8{\pm}0.8mm$ at day 60. Of the fetal structures, fetal head diameter was the most accurate for estimation of gestational age from day 37 until day 60.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.2
• /
• pp.134-153
• /
• 2009

This study is to examine closely the frame structure of buildings in the royal palace of Josen dynasty, focused on inner buildings of Changgyeonggung(昌慶宮) which is built in 19th century, through considering the member size of main structure and analyzing the slope of a rafter. The plans of a size on main member are as follows ; firstly, a length of the perimeter column was accorded with Gunggwolji(宮闕誌) and the planning size of interior column was shown to a Chon(a Korean inch, 寸) unit. The slope of long common rafter that is formed between the perimeter and interior columns was grasped with limits of a definite value. This is that the perimeter column is trimmed to a Chon unit, as Yeongchunheon(迎春軒), In the roof frame of Korean traditional timber architecture, the slope of rafter, first of all, is to decide the slope of long common rafter and then to decide a height of ridge piece settled whole height of a building. And it is regulated with position and height of a post so as to set up middle rafter. Especially, the slope of long common rafter, it is not to be decide through scale of a building but through a length of the perimeter column and composition of bracket structure. And in case middle rafter, the process of its slope is to devide the central bay on the side of a building into equality, and then to adjust position and length of a post.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.3
• /
• pp.173-182
• /
• 2009

In this paper, we studied about the extraction of the parameter and implementation of speechreading system to recognize the Korean 8 vowel. Face features are detected by amplifying, reducing the image value and making a comparison between the image value which is represented for various value in various color space. The eyes position, the nose position, the inner boundary of lip, the outer boundary of upper lip and the outer line of the tooth is found to the feature and using the analysis the area of inner lip, the hight and width of inner lip, the outer line length of the tooth rate about a inner mouth area and the distance between the nose and outer boundary of upper lip are used for the parameter. 2400 data are gathered and analyzed. Based on this analysis, the neural net is constructed and the recognition experiments are performed. In the experiment, 5 normal persons were sampled. The observational error between samples was corrected using normalization method. The experiment show very encouraging result about the usefulness of the parameter.