• International Journal of Concrete Structures and Materials
• /
• 제2권2호
• /
• pp.145-152
• /
• 2008

So far, there has been no study of the concrete to strengthen in the lining of the tunnels, except for the study of the stability of subgrade and the tunnel construction technologies. In the existing concrete work for tunnel lining, lots of problems happen due to the partial compaction and the material segregation after casting concrete. Accordingly, the aim of this study is to improve economic efficiency and secure durability through the improvement of the construction performance and quality of the concrete for the tunnel lining among the civil structures. Therefore, the compactability and strength properties of the High Flowing Self-Compacting Lining Concrete (HSLC) are evaluated to develop the mixing proportion for design construction technology of HSLC that can overcome the inner cavity due to the reduced flowability and unfilled packing, which has been reported as the problem in the existing lining concrete. The result of the evaluation shows that the ternary mix meets the regulations better than the binary mix. Consequently, it has been judged applicable to the cement for tunnel lining.

• 대한조선학회논문집
• /
• 제52권5호
• /
• pp.372-379
• /
• 2015

The blade root fillets which have strong influences on the performance of propellers in the both structural and hydrodynamic points of view, are mechanical parts for smooth connection surface with a blade and a hub. A few related researches (Sabol, 1983; Kennedy, 1997) have noted that 3T-T/3 double radius section design would be suitable for reducing Stress Concentration Factor(SCF) and increasing Cavitation Inception Speed(CIS). In this paper, it is confirmed that this compound cross-section design has come close to the optimum solution in the shape optimization standpoint so that it could protect the propeller blade under the frequent and various loading cases. On that basis, we suggest the definite and simple fillet design methodology that has the cross-section with nT-T/n compound radius and elliptic shape which could sustain the given derivatives information as well as the offsets at the boundary and all inner region of the fillet surface. In addition, the result of design is presented in form of IGES file format in order to connect with NC machine seamlessly.

• Journal of Periodontal and Implant Science
• /
• 제26권1호
• /
• pp.133-142
• /
• 1996

Ten intrabony defects in 10 patients were treated by flap surgery including root surface debridement and placement of an expanded polytetrafluoroethylene(ePTFE) membrane. The membranes were removed after 4-6 weeks. This study was performed to examine the retrived ePTFE membrane by scanning electron microscopy(SEM) for bacterial contamination and adherent connective tissue elements, and to compare it with clinical conditions. The cervical portion of the membrane, which in most cases had become partially exposed to the oral cavity, had a bacterial deposit. Small bacterial colonies and a scatter of single cells in some instances extended into the apical portion of the membrane. Fibroblast-like cells, erythrocytes and fibrous structures were seen in the apical portion of the membrane. Outer surface of membrane tends to more bacterial contamination than inner surface(p<0.01), and upper portions more than lower portions(P<0.01). Comparison of ultrastructural findings and clinical conditions revealed that extent of bacterial contamination of the membrane correlated with gingival inflammation and extent of membrane exposure, but it was not significant statistically. The results suggested that gingival inflammation and membrane exposure affect periodontal regeneration by the use of ePTFE membrane.

• 로봇학회논문지
• /
• 제3권1호
• /
• pp.58-67
• /
• 2008

This study developed a novel augmented reality interface for minimally invasive surgery. The augmented reality technique can alleviate the sensory feedback problem inherent to laparoscopic surgery. An augmented reality system merges real laparoscope image and reconstructed 3D patient model based on diagnostic medical image such as CT, MRI data. By using reconstructed 3D patient model, AR interface could express structure of patient body that is invisible outside visual field of laparoscope. Therefore, an augmented reality system improved sight information of limited laparoscope. In our augmented reality system, the laparoscopic view is located at the center of a wide-angle concave screen and reconstructed 3D patient model is displayed outside the laparoscope. By using a joystick, the laparoscopic view and the reconstructed 3D patient model view are changed concurrently. With our augmented reality system, the surgeon can see the peritoneal cavity from a wide angle of view, without having to move the laparoscope. Since the concave screen serves immersive environments, the surgeon can feel as if she is in the patient body. For these reasons, a surgeon can recognize easily depth information about inner parts of patient and position information of surgical instruments without laparoscope motion. It is possible for surgeon to manipulate surgical instruments more exact and fast. Therefore immersive augmented reality interface for minimally invasive surgery will reduce bodily, environmental load of a surgeon and increase efficiency of MIS.

• 한국정밀공학회지
• /
• 제26권4호
• /
• pp.134-140
• /
• 2009

The feasibility of electrochemical drilling and milling on stainless steel are investigated using tungsten microelectrode with $10{\mu}m$ in diameter. For the development of environmentally friendly and safe electrochemical process, citric acid solution is used as electrolyte. A few hundred nanoseconds duration pulses are applied between the microelectrode and work material for dissolution localization. Tool fracture by Joule heating, micro welding, capillary phenomenon, tool wandering by the generated bubbles are observed and their effects on micro ECM are discussed. Occasionally, complex textures including micro pitting corrosion marks appeared on the hole inner surface. Metal growth is also observed under the weak electric conditions and it hinders further dissolutions for workpiece penetration. By adjusting appropriate pulse and chemical conditions, micro holes of $37{\mu}m$ in diameter with $100{\mu}m$ in depth and 26Jim in diameter with $50{\mu}m$ in depth are drilled on stainless steel 304. Also, micro grooves with $18{\mu}m$ width and complex micro hand pattern are machined by electrochemical milling.

• 한국가축번식학회지
• /
• 제8권1호
• /
• pp.29-35
• /
• 1984

These experiments were carried out to obtain basic information necessary for in vitro culture of aggregated mouse embryos. Inbred ICR mice were used to obtain embryos. The zona pellucida was removed by placing the embryos in Whittingham's medium containing 0.5% protease for about 5-10minutes at 37$^{\circ}C$. Total 263 pairs of 2-, 4- and 8-cell zona free mouse embryos were subjected to aggregation by physical pressure and cultured in Whittingham's medium under the gas phase of 5% CO2 in air at 37$^{\circ}C$ for 24 to 60 hours. The results obtained in these experiments were summarized as follows: 1. Time needed for fusion of 2-, 4- and 8-cell embryos were 0-3, 0-3 and 0-3 hours, respectively and average time needed for in vitro development of 2-, 4- and 8-cell embryos after aggregation to morula and blastocyst were 42, 30 and 13.5 hours, and 51, 39 and 27 hours, respectively. 2. Of total 263 pairs of naked embryos, 227 were firmly aggregated together and the rats of aggregation in 2-, 4- and 8-cell embryos were 71.8, 88.3 and 97.0%, respectively. 3. The rates of aggregated pairs which obtained from 2-, 4- and 8-cell embryos developed to morula were 96.7, 95.6 and 96.9%, respectively, and embryos developed to blastocysts were 88.5, 89.7 and 90.8%, respectively. 4. Conspicuous differences in size of volume and inner cell masses between single and double blastocysts were observed. Although a single blastocolic cavity was formed in most double blastocysts, several formed two distinct cavities from the very beginning.

• KIEAE Journal
• /
• 제8권1호
• /
• pp.11-18
• /
• 2008

The purpose of this study is to analyze application methods and structural characteristics of each element of environment-friendly European housing through classification of skin types. The results of the study are following. 1) The skins are classified by three types; single skin with multi layers, double skin with single layer and double skin with multi layers. 2) Most single skins with multi-layer are composed with wooden louvers, sun blinds and insulating windows. There are introduction of atrium and balcony, and variation sectional space composition according to cases. 3) There are two types of double skins; to put cavity between inner skin and outer skin and more extensional spaces such as balconies, corridors and stair halls. Solar walls and mechanical ventilators are often introduced to double skins with multi-layer. 4) The functions of the latest environment-friendly skins are vary from controllers and buffers of indoor environmental elements such as temperature, light, air and sound to equipments to perform essential functions to efficiently operate HVAC systems.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1424-1429
• /
• 2004

Distillation is one of many processes that can be used for the purification of water. It requires an energy input such as heat and solar radiation is a possible source of energy. In this process, water is evaporated, thus separating water vapor from the solute. The vapor is then condensed to pure water. The temperature of the water, the cavity of the enclosure and the surface of the glass was measured everyday. Fifteen points were chosen for the temperature measure using a thermocouple. The inner wall and the bottom of each still was painted black for good absorption of heat. The enforced glass was used for the cover for the entering of solar energy. The size of all of the water baths was the same, but the glass of the rectangular form had a tilted angle. In the case of fine or general weather, the volume of condensed water produced by $45^{\circ}$ and $60^{\circ}$ is very irregular compared to that of $15^{\circ}$ and $30^{\circ}$, In case of a rainy day, the occurrence of the volume of condensed water was similar to that of $15^{\circ}$ and $30^{\circ}$, but the volume of condensed water produced by $30^{\circ}$ was the highest.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1996년도 제24회 춘계학술대회
• /
• pp.86-93
• /
• 1996

The lubrication characteristics of high-speed ball bearings has been investigated empirically using 45mm bore split inner ring ball bearings employed in small industrial gas turbine engines with oil-jet lubrication method. For the close structural simulation, experiments carried out with bearing mounting supports of real engines, such as bearing housings and oil nozzle assemblies with squeeze film dampers. Thus the results of tests can be directly applied to the design and the development of gas turbine engines. Testing was done by varying operating speeds, axial load on bearings, and lubricant flowrates. During testing, the temperature of bearing at outer-ring face, the power consumption of the driving motor, and the rotating resistance of the bearing were measured. From this study, the representative factors for lubrication characteristics at high speed was found, and the most important one was not operating speed but axial load up to 1.95 million dmN speed and 303 kgf axial load. Furthermore, the detailed variation of the rotational resistance of the bearing could be visualized by measuring the change of the radial load under the bearing supports. The rotational resistance consists of the frictional resistance and the bearing-cavity oil resistance.

• 한국산림과학회지
• /
• 제6권1호
• /
• pp.6-10
• /
• 1967

In the present paper author investigated the symptom, pathogenic fungus and pathogenicity of Endothia canker of Carpinus laxiflora in Korea, and made clear the indistinct discription on its pathogen in the past. 1. The pathogen is identified as Endothia fluens (Schw.) Shear et Stevens. The discription is recorded as follows: Stromata cortical, erumpent, spherical or conical, outer yellowish-brown and inner yellowish, 0.5 to 2.5 mm in diameter; perithecia irregularly embeded in the bottom of stroma, 7 to 23 in a stroma usually spherical to elliptical or irregular, 235 to $370{\mu}$ in diameter, with black slender necks; each neck open the papilliate ostiole to the surface, about 250 to $400{\mu}$ in length; asci clavate or fusoid, colorless, 31.16 to 42.64 by 6.54 to $8.20{\mu}$ in size, average 37.02 by $6.84{\mu}$, with 8 ascospores in double line; ascospores elliptical, ovate or cylindrical, with rounded ends, hyaline, 1-septate, not constrict at the septum, 6.51 to 9.30 by 3.16 to $3.72{\mu}$, average 7.61 by $3.44{\mu}$ in size; pycnidia formed abundantly in stroma. spherical at first but later irregular large cavity by fussing each other; pycnospores oblong or rod-shaped, hyaline, non-septate, 3.8 by $1.9{\mu}$ in size; spore-horn formed abundantly under moist condition. 2. The pathogen is wound parasite invading the hosts through the wound. But after the infection is established, expanding the disease lesion is swiftly vigorus.