• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1936-1942
• /
• 2010

To examine the effect of overdosed functional food in liver-injured patients, we tried to investigate the dose effect of Allium sativum L. (also called garlic) extract on rats with CCl4-induced liver damage, by comparatively examinating the hepatic function of each group. 42 male Sprague-Dawley rats were selected and divided equally (n=7) into normal, control, positive control, and three experimental subgroups (E1, E2 and E3), respectively. For each kg of body weight, hepatic injury was induced by intraperitoneal administration of $0.5\;m{\ell}$ (0.20 g/kg/day) $CCl_4$, which was diluted in equal amount of olive oil, once a day on every other day for total 5 times. Hot water extraction was performed using domestically cultivated organic garlics, and the obtained extract was injected by sonde, once daily during 4 weeks, to each experimental subgroups by different dosage of 0.35 g/kg(E1), 0.70 g/kg(E2), 1.40 g/kg(E3), respectively. Results showed that the injection of garlic extract positively influenced the physiological activation which lowered the oxidative stress, changed the toxicity, and functionally improved the hepatic condition. Comparing the dose effect between the three experimental subgroups (E1, E2, E3), results of the maximal-dosed subgroup (E3) showed less significance compared with the lower-dosed subgroups(E1 and E2), which seems to resulted from the (increased) toxicity of garlic.

• The Korean Journal of Zoology
• /
• v.12 no.3
• /
• pp.94-102
• /
• 1969

The protective action of methylene blue against gamma-irradiation was studied with rats. Albino rats were given 360 rads of whole-body gamma-irradiation following an intraperitoneal injection of physiological saline or methylene blue. Male rats given methylene blue (38mg/kg) and the control rats given saline were alive following gamma-irradiation. Serum lactic dehydrogenase (LDH) activity, and LDH isoenzyme patterns in serum and various organs were determined at various time intervals after the exposure. 1) The serum LDH level in both the control and methylene blue-treated rats was increased during the initial phase, but returned to the initial level thereafter. 2) Methylene blue showed a marked delay in the rise of serum LDH at 15 and 64 hours after exposure. 3) The exposure in the control and methylene blue-treated rats resulted in an increase in the relative amount of the more electrophoretically mobile-anodal isoenzyme (band 1) and a decrease in the least mobile-cathodal isoenzyme (band 5) in serum, liver, heart and testis nearly at 40 and 116 hours, respectively. 4) Isoenzyme patterns in serum, liver and testis after exposure were not significantly different between the control and the methylene blue-treated rats. 5) Methylene blue showed a slight delay in alteration of heart tissue LDH isoenzyme patterns after exposure. 6) The increase of serum LDH level after exposure is a reflection of an immediate increase in the H type, band 1 of LDH isoenzymes. 7) It is concluded from this study that methylene blue has a remarkable radioprotective action in the serum LDH activity and in the heart tissue LDH isoenzyme patterns.

• Clean Technology
• /
• v.19 no.4
• /
• pp.401-409
• /
• 2013

BBiodegradable polymers have attracted great attention because of the increased environmental pollution by waste plastics. In this study, PLA (polylactic acid)/Clay-20 (Cloisite 20) and PLA (polylactic acid)/PBS (poly(butylene succinate)/Clay-20 (Cloisite 20) nanocomposites were manufactured in a twin-screw extruder. Specimens for mechanical properties of PLA/Clay-20 and PLA/PBS (90/10)/Clay-20 nanocomposites were prepared by injection molding. Thermal, mechanical, morphological and raman spectral properties of two nanocomposites were investigated by differential scanning calorimetry (DSC), tensile tester, scanning electron microscopy (SEM) and raman-microscope spectrophotometer, respectively. In addition, hydrolytic degradation properties of two nanocomposites were investigated by hydrolytic degradation test. It was confirmed that the crystallinity of PLA/Clay-20 and PLA/PBS/Clay-20 nanocomposite was increased with increasing Clay-20 content and the Clay-20 is miscible with PLA and PLA/PBS resin from DSC and SEM results. Tensile strength of two nanocomposites was decreased, but thier elongation, impact strength, tensile modulus and flexural modulus were increased with an increase of Clay-20 content. The impact strength of PLA/Clay-20 and PLA/PBS/Clay-20 nanocomposites with 5 wt% of Clay-20 content was increased above twice than that of pure PLA and PLA/PBS (90/10). The hydrolytic degradation rate of PLA/Clay-20 nanocomposite with 3 wt% of Clay-20 content was accelerated about twice than that of pure PLA. The reason is that degradation may occur in the PLA and Clay-20 interface easily because of hydrophilic property of organic Clay-20. It was confirmed that a proper amount of Clay-20 can improve the mechanical properties of PLA and can control biodegradable property of PLA.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.112-121
• /
• 2015

In this study, Copper Azole (CuAz), a domestically available wood preservative for pressure treatment, was employed to perform an experimental research on its infiltration and decay properties in Japanese Red Pine. Test specimens were pressure-injected with CuAz-2 preservative to measure its preservative effectiveness, and then its impact on weight and mass losses. Furthermore, wood specimens were treated with CuAz-2 preservatives of various concentration levels before they were decayed with brown-rot-fungi in order to observe decay properties on light microscope (LM) and field emission scanning electron microscope (FE-SEM). As a result, untreated specimen by Fomitopsis palustris showed the mass loss of more than 40%, and the value of preservative effectiveness of CuAz-2 by indoor decay was $1,73-3.32kg/m^3$. The concentration levels of CuAz-2 preservative were shown to cause significant variations in terms of decay progresses in the cross section, radial section, and tangential section. By contrast, untreated specimens had underwent serious decays in early wood, late wood, longitudinal resin canals, and ray, which led to vertical destruction of wood texture. As for the radial section, ray tracheid, ray parenchyma cell, and window like pits were decayed and destroyed. In the case of tangential section, uniseriate rays and vertical resin canals were seriously decayed. In conclusion, this study indicates that the adequacy of the current CuAz injection amount should be reviewed in the domestic environment because there are significantly different decays at different decay conditions.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.4
• /
• pp.301-305
• /
• 2007

The performance of polymer electrolyte membrane fuel cell could be decreased due to coolant leaked from connection part. Micro pump was used to put small amount of coolant and investigate the effect on fuel cell. The stoichiometric ratio of hydrogen/air was 1.5/2.0, both side of gas was fully humidified, and current density of $400mA/cm^2$ was used as standard condition in this experiment. Constant current method was used to check performance recovery from coolant effect in 3 cell stack. The performance was recovered when coolant was injected in cathode side. On the other hand, the performance was not recovered when coolant was injected in anode side. Ethylene glycol could be converted to CO in oxidation process and cause poisoning effect on platinum catalyst or be adhered on GDL and cause gas diffusion block effect resulting performance decrease. Water with nitrogen gas was supplied in anode side to check performance recovery. Polarization curve, cyclic voltammetry, electrochemical impedance spectroscopy was used to check performance, and gas chromatography was used to check coolant concentration. Constant current method was not enough in full recovery of performance. However, water injection method was proved good method in full recovery of performance.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.4
• /
• pp.300-305
• /
• 2005

Purpose: For the reconstruction of maxillofacial defect created by trauma, infection, or tumor etc, the role of microvascular anastomosis or vessel graft has been increased. Many methods has been tried to increase the success rate of microvascular anastomosis. Various anticoagulants and thrombolytic agents have been used to reduce the failure rate of microvascular anastomosis and avoid re-operation. Many drugs, however, have been used in the limited cases because most of these drugs may cause complications, such as allergy, fever or systemic bleeding. This study was performed to evaluate the influence of the Argatroban on patency and thrombosis in microvascular anastomosis when it is used for local irrigation or general administration. Materials & methods: Eight mature rabbits, weighing 2kg, were used. After exposing both femoral veins, the artificial thrombotic model was made by crushing injury using a smooth needle holder, and the transverse incision were made on femoral vein. The animals were divided into 4 groups according to Argatroban administration methods; control group (n=4), topical irrigation of lumen with saline solution; experimental group 1 (n=4), topical irrigation of lumen with Argatroban saline solution; experimental group 2 (n=4), topical irrigation of lumen with heparin followed by intravenous injection of Argatroban; experimental group 3 (n=4), topical irrigation of lumen with Argatroban followed by IV of Argatroban. Microvascular anastomosis was done with 10-0 Ethilon. The patency was evaluated by empty-and-refill test 30 minutes and 3 days after microanastomosis. The thrombus formation was examined 3 days after microanastomosis by surgical microscope. The histologic findings were also examined. Results: 1. Thirty minutes after microvascular anastomosis, the patency of all experimental groups was better than that of control group, but there was no significant difference among groups. 2. Three days after microvascular anastomosis, the patency of all experimental groups was more improved than that of control group (p<0.05). There was no significant difference among experimental groups. 3. Three days after microvascular anastomosis, the amount of thrombus in all experimental groups was less than that of control group (p<0.05). There was no significant difference among experimental groups. 4. Histologically, a lot of luminal thrombus was observed around sutured area in control group. Few luminal thrombus was observed in all experimental groups. The necrotic changes were observed on the sutured vein wall in all specimens. Conclusion: These results indicate that topical irrigation and/or intravenous administration of Argatroban is effective in improving patency and preventing thrombus formation after microvascular anastomosis.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.6
• /
• pp.1278-1282
• /
• 2001

Effect of the egg yolks from laying hens intubated, p.o., astaxanthin (designated AEY) on the catabolic response overcome of mice was examined. Female ICR mice (6~7 weeks of age) were adapted in a temperature- and humidity-controlled house for one week and randomly divided into 5 groups (6 mice/cage/treatment). Mice were intubated p.o., AEY (5, 10 and 15 mg), control egg yolk (CEY, 10 mg), or fish oil (5 mg) dissolved in 0.2 mL phosphate buffered saline (PBS) every two days for 14 days. At day 15, the 0.1 mL of lipopolysaccharide solution (LPS, 30$\mu\textrm{g}$/0.1 mL 10 mM HEPES) was injected through tail vein, and then, the body weight of mouse and the amount of feed intake were measured over a period of 72 hours. Control group mice were received only PBS and LPS. AEY treatment suppressed the loss of mice body weight in a dose-response manner. Twenty four hours post LPS injection, the reduced body weight per mouse of AEY 5, AEY 10, and AEY 15 mg treatment groups was 3.70, 3.54, and 3.25 g, respectively. Body weight suppression effect of AEY treatment was greater than that of CEY, but less than fish oil. AEY treatment did not alter thymus weight, but increased the weight of spleen or liver. These results indicate that AEY suppressed the loss of body weight by LPS via any function of the spleen and/or liver.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.732-738
• /
• 2008

Simulated moving bed (SMB) process is a continuous chromatographic technology used to separate a large amount of petrochemicals, fine chemicals, pharmaceuticals, and so on, drawing a great attraction of related industries. With the recent development of biotechnology, the SMB process has been adopted for the separation of various useful bio-products. Attempts to understand the separation mechanism of the SMB process in many aspects are reported in many publications. These researches have dealt with the improvement of SMB for easier operation and solving problem in process. The feed mixture fed into the SMB process may be of different concentration batch by batch rather than in uniform concentration. Retention behaviors of feed (psicose (A) and fructose (B) mixture) existing in the SMB unit in dynamic steady-state and feed (psicose (C) and fructose (D) mixture) newly injected into the SMB were analyzed. It was observed that the existing components, (A) and (B), were eluted relatively faster as the injection time of new feed was earlier during the port-switching period. In addition, the components (C) and (D) were eluted earlier as fresh feed was injected earlier in a port-switching time.

• Clean Technology
• /
• v.6 no.2
• /
• pp.121-127
• /
• 2000

There are several kinds of hazardous materials in incinerator flue gas, such as particulate matter, acid gas, heavy metal, dioxin, etc. The activated carbon adsorption is considered as one of the methods removing dioxin from flue gas. Without any additional equipment and facilities, the activated carbon was mixed with lime and sprayed in the semi-drying reactor of an incinerator and filtered in the bag filter, and its efficiency of removing hazardous organic material was investigated. 1,2-dichlorobenzene (o-DCB) was used as a precursor material of dioxin and the effects of the activated carbon amount, the operating temperature of the reactor, and the atomizer r.p.m were measured and analyzed. Experimental results showed that the optimum outlet temperature of the reactor was $145^{\circ}C$ considering the performance of the bag filter, and the adsorption performance improved with the increase of the atomizer r.p.m. Also the performance of removing o-DCB in the bag filter is higher than of the semi-drying reactor.

• Clean Technology
• /
• v.6 no.2
• /
• pp.113-119
• /
• 2000

Due to the toxicity of dioxin in the incinerator flue gas, it becomes a severe social problem. Activated carbon adsorption process is one of the methods for removing dioxin in the flue gas and was investigated its performance for removing hazardous organic compounds. Since dioxin is very hazardous material, 1,2-dichlorobenzene(o-DCB), one of the precursor material of dioxin, was used as adsorbate. The effects of air flow rate, pressure drop in the bag filter, operation temperature of bag filter, and kinds of adsorbents on the removal of o-DCB were measured and analysed. Experimental results showed that the operating temperature was recommended within the range of $140{\sim}170^{\circ}C$ considering the operating condition of incinerator. Also it was necessary to maintain the pressure drop of bag filter $120mmH_2O$ for enhancing the adsorption at the surface layer of activated carbon formed on the bag filter. The use of mixture of same amount of activated carbon and diatomite showed more than 90% removal of o-DCB and also reduced the consumption of activated carbon.