• 한국미생물·생명공학회지
• /
• 제23권4호
• /
• pp.479-484
• /
• 1995

The effect of initial cell concentration on the characteristics of ethanol fermentation was investigated in the batch fermentation of Saccharomyces cerevisiae ATCC 24858. The characteristics were investigated in the range of 60 to 230 g/l of the initial sugar concentrations and 0.5 to 85 g/l of the initial cell concentrations. When the initial cell concentrations were 27 g/l for 60 g/l of the initial sugar and 85 g/l for 230 g/l, the fermentation time required for the complete consumption of the initial sugar was one hour, respectively. The ethanol productivity increased with the initial cell concentration so that, in the case of 100 g/l of initial sugar, the productivity rose up to 55 g/l/hr at 55 g/l of the initial cell concentration. The specific growth rate decreased according to the increase in the initial biomass concentration and finally became zero at around 25 g/l of the cell concentration regardless of the initial sugar concentration. The specific ethanol production rate was constant as 1.02 g/l/hr up to 150 g/l of the initial sugar. However, the rates decreased sharply with the augmentation of concentration of the initial sugar above 160 g/l. The overall ethanol yield represented a constant value, 0.475 g/g irrespective of the initial cell and sugar concentrations. The overall biomass yietd showed a trend to diminish in values with the biomass and ultimately to reach zero more than 25 g/l of the initial cell concentration.

• 한국환경보건학회지
• /
• 제23권1호
• /
• pp.105-108
• /
• 1997

For the removal of heavy metals, Cd, Cu and Cr were used. The initial concentration of Cd and Cu were 1-10 ppm, the removal efficiency of Cd and Cu was 76.2-89.0% and 69.0-79.0%, respectively. The initial concentration of Cr were 1~5 ppm, and the-removal efficiency was low especially at high concentration. In general, the initial concentrations of heavy metals had no relation to the removal efficiency. At the beginning, the removal efficiency was very high, but it was maintained at constant concentration. The trends of accumulations of heavy metals in the stem increased in proportion to the initial concentration. The removal efficiency of heavy metals increased a little bit when nutrients existed in the solution. So that, the initial concentration of Cd and Cu were 1-10 ppm, the removal efficiency of Cd and Cu was 84.8-91.0% and 75.9-82.0%. The initial concentration of Cr were 1-5 ppm, the removal efficiency was 25.0-67.0%.

• 한국대기환경학회지
• /
• 제21권1호
• /
• pp.15-26
• /
• 2005

An experimental investigation of the gas-phase photooxidation of toluene-NO$_{x}$-air mixtures at sub-ppm concentrations has been carried out in a 6.9 m3, indoor smog chamber irradiated by blacklights. Measured parameters in the toluene-NO$_{x}$ experiments included $O_3$, NO, NO$_2$, NO$_{x}$, CO, SO$_2$ toluene, and air temperature. The initial toluene concentration ranged from 225 ppb to 991 ppb and the initial concentration ratio of toluene/NO$_{x}$ in ppbC/ppb was in the range of 5～20. It was found that the variation of gaseous species with irradiation time caused by the photooxidation of toluene-NO$_{x}$-air mixtures depended on the initial toluene concentration for similar concentration ratio of toluene/NO$_{x}$. The dependency of initial toluene concentration on the photooxidation of toluene-NO$_{x}$-air mixtures for toluene/NO$_{x}$=5～6 seemed to be opposite to that for toluene/NO$_{x}$=10～11. The arriving time at maximum ozone concentration depended on both initial toluene concentration and initial concentration ratio of toluene/NO$_{x}$. However, the maximum concentration of ozone formed by photooxidation depended only on the initial toluene concentration.luene concentration.

• Environmental Engineering Research
• /
• 제25권4호
• /
• pp.488-497
• /
• 2020

The present study investigates the feasibility of nitrogenous heterocyclic compounds (NHCs) (Pyridine-Quinoline) degradation by catalytic wet peroxidation (CWPO) in the presence of nanoscale zerovalent iron supported on granular activated carbon (nFe⁰/GAC) using statistical optimization technique. Response surface methodology (RSM) in combination with Box-Behnken design (BBD) was used to optimize the process parameters of CWPO process such as initial pH, catalyst dose, hydrogen peroxide dose, initial concentration of pyridine (Py) and quinolone (Qn) were chosen as the main variables, and total organic carbon (TOC) removal and total Fe leaching were selected as the investigated response. The optimization of process parameters by desirability function showed the ~85% of TOC removal with process condition of initial solution pH 3.5, catalyst dose of 0.55 g/L, hydrogen peroxide concentration of 0.34 mmol, initial concentration of Py 200 mg/L and initial concentration of Qn 200 mg/L. Further, for TOC removal the analysis of variance results of the RSM revealed that all parameter i.e. initial pH, catalyst dose, hydrogen peroxide dose, initial concentration of Py and initial concentration of Qn were highly significant according to the p values (p < 0.05). The quadratic model was found to be the best fit for experimental data. The present study revealed that BBD was reliable and effective for the determination of the optimum conditions for CWPO of NHCs (Py-Qn).

• 한국수산과학회지
• /
• 제37권1호
• /
• pp.18-23
• /
• 2004

Effect of initial protein concentration on the protein removal rate was assessed for seawater aquarium using a foam separator. Protein removal rate was increased and removal efficiency was decreased with the increase of initial protein concentration. Enrichment ratio was decreased and foam generation rate was increased with the increase of initial protein concentration. Total suspended solids (TSS) removal rate was increased with the increase of initial protein concentration, and TSS removal efficiency was decreased with the increase of initial protein concentration. Turbidity removal rate and removal efficiency were increased with the increase of initial protein concentration.

• 한국대기환경학회지
• /
• 제21권1호
• /
• pp.27-38
• /
• 2005

An experimental investigation of the gas-phase photooxidation of toluene-NO$_{x}$-air mixtures at sub-ppm concentrations has been carried out in a 6.9 ㎥, indoor smog chamber irradiated by blacklights. Measured parameters in the toluene-NO$_{x}$ experiments included aerosol, $O_3$, NO, NO$_2$, NO$_{x}$ CO, SO$_2$ toluene, and air temperature. The initial toluene concentration ranged from 225 ppb to 991 ppb and the initial concentration ratio of toluene/NO$_{x}$ in ppbC/ppb was in the range of 5～20. It was found that the variation of aerosol number concentration with irradiation time caused by the photooxidation of toluene-NO$_{x}$-air mixtures depended on the initial toluene concentration for similar concentration ratio of toluene/NO$_{x}$. The dependency of initial toluene concentration on the photooxidation of toluene-NO$_{x}$-air mixtures for toluene/NO$_{x}$= 5～6 seemed to be opposite to that for toluene/NO$_{x}$=10～11. The maximum number concentration of aerosols formed by photooxidation and the aerosol yield depended on both initial toluene concentration and initial concentration ratio of toluene/NO$_{x}$. In this study, the aerosol yield, defined as aerosol formed per unit toluene consumed, was found to be 0.01～0.16.und to be 0.01～0.16.

• KSBB Journal
• /
• 제6권3호
• /
• pp.255-261
• /
• 1991

The effect of concentration of yeast extract and NH4Cl in the mediun of alcohol fermentation of S. cerevisiae ATCC 24858 on the fermentation characteristics, specific growth rate, sugar conversion, alcohol productivity was experimentally investigated. Regardless of initial sugar concentrations, the values of the above three characteristics increased with augument of concentration of yeast extract. However, the increasing tendency ceased above a certain concentration. The concentration of NH4Cl had little effect on the change of the three characteristics. The functional relationships between the concentration of yeast extract and the characteristics were different according to the initial sugar concentrations, but those between the ratio of yeast extract concentration to initial sugar concentration and the characteristics could be expressed as same forms respectively regardless of initial sugar concentrations. Also the values of the three characteristics approached to the maximum values around 0.085 of the ratio, but did not increase any more above 0.1 of the ratio. We have come to conclusion that the optimum ratio of the yeast extract concentration to the initial sugar concentration was about 0.085 and the ratio should not be decided as greater than 0.1 in the medium of alcohol fermentation of S. cerevisiae ATCC 24858.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권5호
• /
• pp.527-534
• /
• 1997

Freezing of an aqueous sodium cWoride solution (Nacl- H20) saturating a packed bed with ini¬tial salt concentrations of 5, 10, 15(k by weight is investigated experimentally in a rectangular cav¬ity. The system was cooled from the top, bottom and a vertical side wall. For the freezing experi¬ments from below, there was little effect of the initial salt concentration throughout the freezing process, and the global freezing rate was not affected by the initial salt concentration. For the freezing from above, the size of the mush region decreased and the mushlliquid interface became flatter as the initial liquid concentration is decreased. For the freezing from vertical side wall, reheating of the mixture was intensified with an increase in the initial salt concentration. For Ci= 5%, supercooling was observed only at the early times of freezing process, but for Ci= 15% small supercooling was observed throughout the freezing process.

• 한국세라믹학회지
• /
• 제34권4호
• /
• pp.351-356
• /
• 1997

The origin of the variation of initial permeability in manganese-zinc ferrite polycrystals with a content of hematite was investigated. Initial permeability showed maximum with hematite content while there was no significant change in microstructure. Saturation magnetization increased with hematite content. So the variation of initial permeability was not explained on the basis of microstructural change or saturation magnetization. Temperature dependence of initial permeability revealed magnetocrystalline anisotropy was the origin of the variation of initial permeability. The change in magnetocrystalline anisotropy was ascribed to the variation in ferrous ion concentration. Therefore the variation of initial permeability in manganese-zinc ferrite polycrystals with a content of hematite was due to ferrous ion concentration via magnetocrystalline anisotropy.

• 한국환경과학회지
• /
• 제7권4호
• /
• pp.559-564
• /
• 1998

The effects of temperature, initial $Pb^{2+}$concentration and initial sludge concentration on the initial $Pb^{2+}$ removal rate and maximal $Pb^{2+}$removal amounts in activated sludge, respectively, were investigated. The removal of $Pb^{2+}$ in activated sludge was proved to be temperature-dependent process. The initial $Pb^{2+}$ removal rate increased from 187.5 to 261.4 mg $Pb^{2+}$/g sludge dry weight min, in response to the promoted temperature from 1$0^{\circ}C$ to 6$0^{\circ}C$, while the maximal $Pb^{2+}$removal amount (78.5 mg $Pb^{2+}$/g sludge dry weight) occurred at 30t . As the initial $Pb^{2+}$concentration increased from 36 to 228 mg $Pb^{2+}$/L at the constant temperature of 30C and initial sludge concentration of 1.5 g sludge dry weight/L, the time to reach an equilibrium state was almost independent of the initial $Pb^{2+}$concentration and the equilibrium $Pb^{2+}$/removal amount was increased Irom 41.9 to 73.6 mg $Pb^{2+}$/g sludge dry weight. On the contrary, the equilbrium $Pb^{2+}$ emoval amount was decreased from 87.7 to 65.3 mg $Pb^{2+}$/g sludge dry weight as the in- crease of initial sludge concentration from 0.22 to 1.76 g sludge dry weight/L.