• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.33-40
• /
• 1988

In this study, effects of the density of soil and the confining pressure applied to the soil sample on the elastic moduli of subgrade soils are experimentally analyzed. Through investigation of subgrade materials of domestic expressways, five typical types of subgrade soils are selected for the experiments. A series of unconsolidated undrained triaxial tests is performed on samples prepared with various water contents and densities at the confining pressures of 1.02, 2.04, and $3.06kg/cm^2$. Initial tangent modulus is inferred from the unloading-reloading portion of the stress strain curve obtained during an individual loading-unloading-reloading test. As a result of the analysis, it is found that the effect of the confining pressure on the elastic modulus of subgrade material is well consistent with the equation proposed by Janbu, and that the elastic modulus can be related to the dry unit weight expressing the Janbu constants as exponentiial functions of it. It is also found that the water content has little effect on the elastic modulus for the samples with the degree of saturation less than 70%.

• Composites Research
• /
• v.30 no.6
• /
• pp.393-398
• /
• 2017

The shrinkage distribution of a dental composite (Clearfil AP-X, Kuraray, Japan) used for dental restoration was observed using a digital image correlation method. In order to analyze the shrinkage distribution formed during and after light irradiation, digital images were taken with different photographing conditions for each period. Optimal photographing conditions during LED irradiation were obtained through a preliminary experiment in which the exposure time was applied from 0.15 ms to 0.55 ms in 0.05 ms intervals. The DIC analysis results showed that the strain was non-uniform. For the initial 20 s of light irradiation the composite resin shrank to the level of 50~60% of the final curing shrinkage. Such large shrinkage amount of the composite resin lump affected the tensile stress concentration near the adhesive region between the composite resin and the substrate.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.4
• /
• pp.100-106
• /
• 2005

Sugar beet stillages were used as a substrate for the production of single cell protein by the thermotolerant yeasts Candida rugosa, Kluyveromyces marxianus and C. utilis. The biomass production increased in accordance with the increase of pH-value, but protein content decreased. C. rugosa showed the highest crude protein production as 3.68g/l and C. utilis 2.9g/l, Kl. marxianus 2.30g/l, respectively. The rate of COD reduction in stillage versus crude protein production of C. rugosa showed the highest value as 0.35~0.39g/l as a good strain for single cell protein production using sugar beet stillages.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.3
• /
• pp.282-291
• /
• 1999

Lactic acid bacteria were isolated from Kimchi and screened for bacteriocin. A total of 99 strains showed antimicrobial activity when grown on solid media, yet only 10 showed antimicrobial activity in liquid media. Strain H-559, identified as Lactococcus lactis subsp. lactis, exhibited the strongest inhibitory activity and was active against pathogenic bacteria including Listeria monocytogenes, Staphylococcus aureus, and Bacillus cereus as well as other lactic acid bacteria. The antimicrobial substance produced by L. lactis subsp. lactis H-559 was confirmed to be a bacteriocin by the treatment of $\alpha$-chymotrypsin, and protease type Ⅸ and ⅩIV. The bacteriocin activity remained stable between pH 2.0 and pH 11.0 and during heating for 10 min at $100^{\circ}C$. The bacteriocin production started in the exponential phase and stopped in the stationary phase. L. lactis subsp. lactis H-559 showed the highest bacteriocin activity at a culture temperature of $25^{\circ}C$, and an inverse relationship between the bacteriocin productivity and mean growth rate at different culture temperatures was observed. The mean growth rate and bacteriocin productivity of L. lactis subsp. lactis H-559 increased as the initial pH of the media increased.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.2
• /
• pp.140-146
• /
• 2001

In order to analyze the photodegradation of plastic materials for floats or frames of fisheries facilities, weathering experiment on 3 kinds of plastic materials like high density PE of Korea(KHDPE) and Norway(NHDPE) and high strength PVC(Hi-PVC) was carried out during 900 hours exposure by using xenon light source of weather-Ometer. The results obtained are as follows; With increasing of ultraviolet radiation(UVR) time, a remarkable losses in the mechanical properties of each specimen were observed except for the remaining strain of HDPE materials. As NHDPE lost almost 15% of its initial tensile stress during a 900 hours exposure followed by KHDPE 12% and Hi-PVC 6%. In addition, the remaining tensile stress RS(kg/$mm^2$) decreases almost linearly with the lapse of exposure time to light Y(Year) and the empirical equations of each specimen computed as follows; KHDPE : RS=2.6769-0.0003Y($r^2$=0.63) Hi-PVC : RS=5.3470-0.0003Y($r^2$=0.91) NHDPE : RS=2.4929-0.0004Y($r^2$=0.97) It was observed by scanning electron microscope that all specimens with UVR time had started to decompose and had bubbled areas and small holes.

• The Plant Pathology Journal
• /
• v.20 no.2
• /
• pp.97-102
• /
• 2004

Paenibacillus polymyxa E681, with its plant growth promotion and root colonization ability, has been proven to be a promising biocontrol agent of cucumber and barley. This study investigated the attributes related to the movement of bacteria from the seed to the radicle and to the whole root system. It also illustrated the existing form and population changes of the bacteria on seed and root using the scanning electron microscope and confocal laser scanning microscopy. The bacteria invaded and colonized the inside of the seed coat while the seeds were soaked in bacterial suspension. Almost the same number of bacteria on seed surface invaded the inside of the seed coat right after seed soaking. The population densities of E681 increased greatly inside as well as on the surface of the seed before the radicle emerged. The bacteria attached on the emerging radicle directly affected the initial population of newly emerg-ing root. The colonized cells on the root were arranged linearly toward the elongation of the root axis. In addition to colonizing the root surface, strain E681 was found inside the roots, where cells colonized the inter-cellular space between certain epidermal and cortical cells. When the cucumber seeds were soaked in bacterial suspension and sown in pot, the bacterial populations attached on both the surface and inside of the root were sustained up to harvesting time. This means that E681 successfully colonized the root of cucumber and sustained its population density up to harvesting time through seed treatment.

• The Plant Pathology Journal
• /
• v.23 no.4
• /
• pp.239-244
• /
• 2007

MicroTom is a miniature tomato plants with various properties that make it as a model system for experiments in plant molecular biology. To extend its utility as a model plant to study a plant - bacterial wilt system, we investigated the potential of the MicroTom as a host plant of bacterial wilt caused by Ralstonia solanacearum. We compared the disease progress on standard tomato and MicroTom by two inoculation methods, root dipping and soil drenching, using a race 1 strain GMI1000. Both methods caused the severe wilting on MicroTom comparable to commercial tomato plant, although initial disease development was faster in root dipping. From the diseased MicroTom plants, the same bacteria were successfully reisolated using semiselective media to fulfill Koch's postulates. Race specific and isolate specific virulence were investigated by root dipping with 10 isolates of R. solanacearum isolated from tomato and potato plants. All of the tested isolates caused the typical wilt symptom on MicroTom. Disease severities by isolates of race 3 was below 50 % until 15 days after inoculation, while those by isolates of race 1 reached over 50% to death until 15 days. This result suggested that MicroTom can be a model host plant to study R. solanacearum - plant interaction.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.16 no.1
• /
• pp.21-27
• /
• 2008

The expression of heat shock protein genes (Hsp 70, Hsp 40, Hsp 20.8 and Hsp 20.4) against thermal stress in silkworm Bombyx mori was performed through semi-quantitative reverse transcriptase-polymerase chain reaction (RT-PCR). Upon exposure of silkworm to two temperature regimes ($38^{\circ}C$ and $42^{\circ}C$), significant change in the expression of Hsp gene was observed as compared to the control. Hsp 70 and Hsp 40 showed increased expression than the small heat shock protein genes Hsp 20.8 and Hsp 20.4. The Hsp 70 showed increased expression during the recovery period as compared to 1 hr thermal treatments ($38^{\circ}C$/1 hr and $42^{\circ}C$/1 hr). Whereas, Hsp 40, Hsp 20.8 and Hsp 20.4 genes showed higher expression level at initial stages that later gradually decrease during recovery period. Tissue specific expression of Hsp 70 showed variation in the level of expression amongst the tissues. The mid gut and fat body tissues showed higher expression than the cuticle and silk gland tissue. The Hsp 70, Hsp 40 gene expression was analyzed in thermotolerant (Nistari) and thermo susceptible silk worm strain (NB4D2) and results showed significant variation in their expression level. The Nistari showed higher expression of Hsp 70 and Hsp 40 genes than the NB4D2. These findings provide a better understanding of cellular protection mechanisms against environmental stress such as heat shock, as these Hsps are involved in an organism thermotolerance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1229-1235
• /
• 2011

Fatigue tests were conducted on the aluminum alloy, A7075-T6 to determine the most reliable fretting fatigue damage parameter. Specimens with grooves were used, so that either fretting fatigue crack at the pad/specimen interface or plain fatigue crack at the groove could be nucleated, depending on the pad pressure. Both the crack nucleation location and initial crack orientation were examined using optical microscopy, and the results were used to assess the reliability of the various fretting fatigue damage parameters that have been most commonly used in the literature. Finite element analysis was employed to obtain the stress and strain data of the specimen, which were needed to estimate the parameter values and the orientation of the critical plane. It was revealed that both the Fatemi.Socie and McDiarmid parameters, which assume shear-mode fatigue cracking, are the most reliable.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.5
• /
• pp.68-79
• /
• 1998

In the years, the concern about high-strength concrete which is new material has been heightened as a result of active research and development. Recently, as the building structure has been being bigger, higher, longer and more specialized, the demand of material with high-strength concrete for building has been increasing. The demand of high -strength concrete is expected to increase with expansion of usage about the complex concrete structures such as bridge structure as well as nuclear plants, underground structures, hydraulic structures and arctic area sturctures. In this research, silica-fume was used as an admixture in order to get a high-strength concrete. Water/binder ration was limited no more than 18 percent and the amount of unit cement was increased. In this study, a number of trial in concrete mix was carried out to get optimal mix design, and the target slump with $10{\pm}2cm$ was set for in-situ construction. High-strength concrete with cylinder strength of 1,200kgf/$cm^2$ in the 28-days was produced and tested. The static test was carried out to measure the ultimate load, the initial load of flexural and diagonal cracking, crack patterns, fracture modes. The load versus strain and load versus deflection relations were obtained form the static test. The test results were compared with the shear strengths predicted by the equations of ACI code 318-89 and orther researchers. Based on the test results, shear strength equation of reinforced concrete beam using high strength concrete was proposed. Form an evaluation of the results of this experimental investigation, it was concluded that shear strength after diagonal tention cracking diminished with the increase in compressive strength for beams.