• 한국해양공학회지
• /
• 제18권3호
• /
• pp.44-49
• /
• 2004

Initial hull form of 10 G/T and 40 knots class coastal patrol boat is newly developed. The resistance performances are experimentally and numerically investigated by model test and CFD technique. The effect of initial trim and a fin attached at hull side are studied together. Wave patterns are observed to make clear the relation between the performance and the wave characteristics. It can be found that the initial trim plays a role in increasing the resistance performance above a certain velocity, and the CFD technique can be used at the initial design stage of a high-speed planning boats.

• 한국해양공학회지
• /
• 제11권4호
• /
• pp.221-226
• /
• 1997

This study was carried out for the hull form development of G/T 340ton class high speed fishery patrol ship by Chosun University at the Circulating Water Channel cooperatively with Korea Maritime Service. Same size of 15knots class fishery patrol ship was selected as a parent form (Model number : CU-015), and modified fore and after body to be suitable for the operation at 20 knots. To minimize the breaking wave in the vicinity of fore body at high speed zone, high bulb nose and slender fore body hull form was chosen as an initial condition. Meanwhile, to ensure the engine room space keeping high resistance-propulsion performance, U-type stern hull form was developed.

• 한국해양공학회지
• /
• 제20권1호
• /
• pp.32-36
• /
• 2006

The initial hull form of a 100 tan, 45 knot class high-speed craft is newly developed. The resistance performances are investigated using a model test at high speed in a circulating water channel. The effect of the initial trim is studied together. Wave patterns are observed to clarify the relationship between the resistance performance and the wave characteristics. It can be found that the initial trim plays a role in increasing the resistance performance above a certain velocity.

• 대한조선학회논문집
• /
• 제55권3호
• /
• pp.196-204
• /
• 2018

Present paper shows the basic design procedure for platform support vessel operating in open sea, and hull form development process. General design concept considering the operating mission, operating sea condition and shipping freight, etc. is explained shortly. For the hull form design, the initial hull form was designed based on the reference PSVs. The resistance and propulsion test results for the initial hull form with twin Azimuth thruster were analyzed and a few items for improvement were derived. At the next stage, main parameters including Length, Cp-curve, Cb, Lcb, etc. were changed totally for the hull form improvement. Furthermore, 3 different bulbous bows for the fore-body design to reduce the wave resistance and after-body design to reduce the residual resistance were carried out. The best hull form among the 3 fore-bodies with same after-body was selected through the comparison of wave resistance calculation results. Twin ducted Azimuth thruster with the smaller propeller diameter than the former were adapted to increase the propulsive efficiency. The final hull form with the twin Azimuth thruster was evaluated to satisfy more than the target design speed 14 knots in sea condition with sea margin 15% at the 5,000kW BHP through the model test in KRISO.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.79-84
• /
• 2004

Initial hull form of 10 G/T and 40 knots class coastal patrol boat is newly developed. The resistance performances are experimentally and numerically investigated by model test at high speed circulating water channel(CWC) and CFD technique. The effect of a fin attached at hull side and initial trim are studied together. Wave patterns are observed to make clear the relation between the resistance performance and the wave characteristics. it can be found that the initial trim plays a role to increase the resistance performance above a certain velocity.

• 한국CDE학회논문집
• /
• 제10권4호
• /
• pp.244-253
• /
• 2005

In the initial ship design stage of shipyards, the hull form design, the basic design (compartment modeling and ship calculation), and the hull structural design are being performed by different systems. Thus, the problem on interfaces between these systems occurs. To solve this, we developed the hull form design system 'EzHULL' and the compartment modeling and ship calculation system 'EzCOM-PART' for developing finally an integrated ship design system. And, in this study, we present an object-oriented hull structural design .system 'EzSTRUCT', which is developed recently. A structural design in an initial design stage can be frequently changed, because the design is not firmly determined yet. Therefore, designers perform the simplified structural modeling with bigger structural parts (or objects) such as deck, longitudinal bulkhead, etc. in the initial design stage, and the detailed structural modeling with smaller structural parts such as plate, seam, slot, etc. in the detailed design stage. However, the existing hull structural CAD system used in a shipyard is not efficient in generating a 3D CAD model in the initial design stage, because it has difficulty in handling frequent changes in design. Therefore, designers initially draw 2D drawings in the initial design stage, and generate the 3D CAD model from these 2D drawings in the detailed design and production design stages. In this study, the hull structural design system, which can efficiently generate a 3D CAD model through rapid modeling at an initial design stage, was developed in this study To evaluate the applicability of the developed system, we applied it to hull structural modeling of various ships such as a VLCC, a bulk carrier, etc. As a result, it could efficiently generate a 3D CAD model of a hull structure.

• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.763-769
• /
• 2010

Thanks to the rapid advancement of computational power and development of numerical methods, Computational fluid dynamics techniques are being used widely for the prediction of ship resistance performance. In the present study, an automatic tool was developed to facilitate hull form modification, consequent mesh generation, and flow analysis for parametric study. It is a tedious job to go back and forth between geometry modification and mesh generation for every hull form variation. With the developed tool, users can make multiple hull form variation and their hull form performance prediction easily in a few simple steps. The verification of the developed tool was done by applying it to resistance performance parametric study of a generic POD propulsion cruise ship with different lengths of bow and stern. It is believed that the tool can be extended to more sophisticated hull form variation and help optimize the ship performance more efficiently.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.192-197
• /
• 2003

Initial hull form of 3 G/T and $20{\sim}25$ knots class coastal leisure boat is newly developed. The performances, which are resistance, trim and sinkage, are investigated at high speed circulating water channel (CWC). Wave patterns are observed together to make clear the relation between the resistance performance and the wave characteristics.

• 대한조선학회논문집
• /
• 제33권1호
• /
• pp.182-188
• /
• 1996

선형 설계는 concurrent ship design의 첫단계로서, 조선 CIM 시스템 구축을 위해 매우 중요하다. 본 논문에서는 이러한 인식하에 CIM 개념에 입각한 초기 설계 단계에서의 선형 설계 업무와 기능에 대하여 정리하였다. 그리고, 상용 3D-CAD 시스템을 이용한 선형 설계 시스템(DWHULL)을 개발하였다. 결론 부에서는 향후 개발 방향 및 시스템 보완 사항을 제시하였다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2008년도 특별논문집
• /
• pp.106-111
• /
• 2008

A hull form is 181K DWT Bulk Carrier, of which new design and hull form have been developed using CFD tools and model tests. The basic concept design of hull form has been carried out with considering the factors, which are a lot of influence of the wave and viscosity resistance. The considered factors of particular are LCB, DLWL shape, tern and stem profile, Cp-curve shape, etc. Numerical calculations are carried out in the initial design stage and experimental model tests are also carried out in towing tank of MOERI. The variation of the significantly effective characteristics is carried out to achieve optimized hull form. The results from numerical calculations and model test as well as the design procedures to obtain an optimized hull form resent in this paper.