• Journal of Korean Port Research
• /
• v.9 no.1
• /
• pp.45-56
• /
• 1995

Investigation of the physical behavior of dredged material disposal in coastal water includes estimations of water column concentration in the receiving water, exposure time, the initial deposition pattern as well as thickness of material at the dumping fields near the estuary area. Calculation based on vertical setting and horizontal advection of single particles ignore the effects of bulk properties of the disposed material, vertical and horizontal diffusion, and material dilution due to the entrainment of ambient water during descent. This paper focuses on the spatial and temporal changes in the dumping fields for the water column and bottom at a hypothetically confined coastal water, where the ambient time-invariant velocity and density profiles are applied, within the initial time period following the instantaneous release of the dredged material. This model accounts the behavior of material after release divided into three phases: convective descent, dynamic collapse and long-term passive dispersion

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1329-1339
• /
• 1993

Creep tests were performed to determine the nonlinear viscoelastic properties of apples and pears with the creep experiment apparatus designed in this study. Compressive creep characteristics of fruits were tested at two kinds of storage conditions, four periods of storage and three levels of initial stress. Ten replications were made at each treatment combination. The creep behavior of the fruits could be well described by the nonlinear viscoelastic model as a function of initial stress and time. however, for each level of initial stress applied, the compressive behavior of the samples was satisfactorily represented by Burger's model. For all sample fruits, the longer the samples was stored, the higher the instantaneous elastic strain was observed, and the creep progressed at a high rate. These phenomena were even more remarkable on the fruit stored at the normal temperature storage rather than at the low temperature storage.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.1 s.30
• /
• pp.13-22
• /
• 1997

This paper is concerned with an experimental study on structural behavior of Concrete-Filled Circular Tubular(CFCT) column to H-beam connections. The important parameters are the number of inner reinforced rib and the width of H-beam flange(100, 150, 200mm) with variable column thickness(5.8mm, 9.2mm, 12.5mm) around the joint between CFCT and H-beam. Test results are summarized for the displacement, strength, initial stiffness, failure mode and energy absorption capacity of each specimen. The purpose of this paper is to investigate the initial stiffness and the strength of connections to evaluate the structural behavior of the CFCT column to H-beam connections. From the discussion about the test results, the basic data for non diaphragm connection design would be suggested.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.5
• /
• pp.410-416
• /
• 2021

The initial electrochemical performance of ceramic fuel cell with thin-film electrolyte was evaluated in terms of peak power density ratio, open circuit voltage ratio, and activation/ohmic resistance ratios at 500℃. Hydrogen and air were used as anode fuel and cathode fuel, respectively. The peak power density ratio reduced as ~17% for 40 minutes, which rapidly decreased in the early stage of the performance evaluation but gradually decreased. The open circuit voltage ratio decreased with respect time; however, its time behavior was remarkably different with the reduction behavior of the peak power density ratio. The activation resistance ratio increased as ~15% for 40 minutes, which was almost similar with the time behavior of the peak power density ratio.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.5
• /
• pp.340-346
• /
• 2021

The initial electrochemical performance of ceramic fuel cell with thin-film electrolyte fabricated by plasma-enhanced atomic layer deposition method was evaluated in terms of peak power density ratio, open circuit voltage ratio, and activation/ohmic resistance ratios at 500℃. Hydrogen and air were used as anode fuel and cathode fuel, respectively. The peak power density ratio reduced as ~52% for 30 min, which continually decreased as time increased but degradation rate gradually decreased. The open circuit voltage ratio decreased with respect time; however, its behavior was evidently different from the reduction behavior of the peak power density. The activation resistance ratio increased as ~127% for 30 min, which was almost similar with the reduction behavior of the peak power density ratio.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.2
• /
• pp.61-70
• /
• 1988

In order to consider the concept of the fitness for purpose'in fatigue design of offshore structure, fracture mechanics is applied to evaluate initial or weld defects. Generally, linear elastic fracture mechanics has been applied to tstimate initial fatigue crack propagation rate as well as long fatigue crack propagation rate. But, initial fatigue crack propagation rate in elasto-plastic notch field may not be characterized by application of stress intensity factor range .DELTA. K, because plastic effect due to stress concentration of notch may contribute to initial crack propagation. Therefore, to introduce the plastic effect into fatigue crack driving force, in this studty, the evaluating method of J-integral range .DELTA. J, was developed by willson was modified for application to notch field. In calculation of .DELTA. J obtained from the modified J-integral, stress gradient and crack closure behavior in the notch field were considered. The initial crack propagation rates in the notch fields of mild steels and high tensile strength steels were correlated to .DELTA. J. As the result, it was cleared that the present .DELTA. J is applicable to charachterize the fatigue crack propagation rates in both the elastic and elasto-plastic notch fields.

• Journal of Biosystems Engineering
• /
• v.15 no.3
• /
• pp.207-218
• /
• 1990

Grains display characteristics of both elastic bodies and viscous fluids when they are subjected to mechanical treatments in harvesting, handling, and processing. This viscoelastic behavior of grains when mechanically stressed must be fully understood to establish maximum machine efficiency and have a minimum degree of grain damage and the highest quality of the final product. The studies were conducted to examine the effect of the moisture content, the loading rate and the initial deformation on the stress relaxation behavior of whole kernel of rough rice, and develop the rheological model to represent its stress relaxation behavior. The following results were obtained from the study. 1. Moisture content had the greatest influence on the initial portion of the relaxation curve. With elapsing time the lower moisture content resulted in the lower residual stress for the Japonica-type rough rice and vice versa for the Indica-type rough rice. But within the ranges of moisture content tested, the degree of stress relaxation per unit strain on the Indica-type rough rice was a little higher than those on the Japonica-type rough rice. 2. The slower loading rate resulted in less initial stress. The decreasing trend of residual stress for all the samples tested with increasing loading rate was shown. 3. The higher initial deformation for all the samples resulted in less initial stress. The increasing of amount of stress relaxation per unit strain with increase of initial stress indicated that viscoelastic properties of rough rice depended not only upon duration of load applied but also initial stress applied. This means that rough rice is nonlinear viscoelastic material. 4. The compression stress relaxation properties of rough rice kernel can be described by a generalized Maxwell model representing by the Maxwell elements.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.4
• /
• pp.26-29
• /
• 2006

The study to be presented related on initial behavior of quench concerned with many considerations, such as epoxy impregnated coil, critical current density related on strain and temperature, winding effect and behavior of internal superconducting wire. Especially, the deformation behavior of coils under magnetic field and thermal contractions at cryogenic temperatures to be dealt with the analytical method related on Fracture Mechanics. From the results, we know that the strain by self weight contribute to epoxy cracking at the edge of deformed coils and the deformation behavior relate on epoxy cracking must be dealt with biaxial loading problem. Then, the epoxy crack on $r\theta-plane$ under biaxial loading have been propagated with inclined crack angle and joined superconducting wire. Also, we can explain transfer of epoxy crack propagation energy from epoxy resin to superconducting wire.

• Journal of the Korean Home Economics Association
• /
• v.34 no.4
• /
• pp.119-131
• /
• 1996

The relationship of maternal separation anxiety, availability of support system and child gender to initial preschool adjustment was examined. Data were collected on 72 middle-class Korean children(35 boys, 37 girls) between the ages of 31 months and 60 months who were entering preschool. Subjects were from intact families, all with non-working mothers. Mothers completed the Maternal Separation Anxiety Scale(MSAS) and indicated the number of extended family members in the home as an index of social support. Classroom teachers completed the Preschool Behavior Questionnaire (PBQ) for each child after the first 2 weeks and again after 6 weeks of school. Each child was observed by the research team during the first 2 weeks of school and again after the 6th-week using the Child Observation System (COS). Applying the COS observed behavior was classified as being in the dependent, neutral, or active mode. All instruments were culturally relevant as validated by Korean experts. Maternal Separation Anxiety was a significant predictor for girls only, accounting for 11% of initial COS variance (p=＜.05). In contrast, social support was a significant predictor for boys only, accounting for 28% of initial PBQ variance when entered after MSAS(p=.005). A significant difference between initial and 6th-week adjustment was obtained in the expected direction on the COS with behavior improving with time (t=-4.06, p=.001). Although a significant difference between initial and 6th-week PBQ adjustment was also obtained (t=-3.63, p=.001), it was not in the direction expected, problematic behavior were found to increase with time. Cultural and developmental factors help explain the findings. Given the patrilineal social system in Korea, boys are highly preferred over girls. Thus the at-home support system, comprised primarily of grandparents, may have a significant influence on school adjustment particularly of first-born sons. In contrast, since girls are viewed as fragile and vulnerable, mothers may express greater separation anxiety about girls. Finally, as would be expected, older children may be able to develop coping skills more readily than younger ones, as child adjustment on the COS significanlty improved over the 6-week period.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.6
• /
• pp.189-197
• /
• 2019

The purpose of this study was to investigate about the effects of parental rearing behavior on self-esteem and gender role stereotype during adolescence and to reveal the mediating effect of self-esteem on adolescents' gender role strerotype. Also investigated the relationship among these variables and condition variables. For this purpose, used the Second Grade longitudianl Panel data of Middle School from the Korea Youth Panel Survay(KYPS). And the latent growth model was analyzed 3,449 men and women adolescents' cases of the first, the fourth and the sixth wave of the Korea Youth Panel Survey(KYPS) administered by Korea Institute for Youth development. And the structural equation model was used to investigate whether self-esteem mediates parental rearing behavior and male and female gender role Strerotype. The results of this study, the direct effect between variable factors showed that the more positive the parenting behavior of the second grader of middle school is, the more positive the self-esteem of male adolescents and the initial value of stereotypes of male gender role. It also affects the self-esteem of female adolescents and stereotypes of female gender roles but not statistically significant. The male gender role stereotypes were decreased in influence by the rate of change of parental rearing behaviors, and the initial value and the rate of change of self-esteem were statistically influenced to the male gender role stereotypes and the higher the self-esteem, the higher the self-esteem. However, there was no significant effect on stereotypes of female gender roles. As a result of analyzing the mediating effect of self-esteem, partially mediated between the initial value of parental rearing behavior and initial stereotype of male gender role, but there was no longitudinal mediation effect. There was no mediating effect of self-esteem between parental rearing behaviors and stereotypes of female gender roles and there was no longitudinal mediation effect. The effect of condition variable gender was found that female adolescents are more affected by paretal rearing behavior than male adolescents and also affected by the growth process. The monthly income of households influenced the initial value of parental rearing behaviors and showed a difference in parental rearing behavior according to household income. And the higher the mother 's educational level, the more the self-esteem of male adolescents was affected.