• Journal of information and communication convergence engineering
• /
• 제15권4호
• /
• pp.237-243
• /
• 2017

This paper presents an analysis of the electromagnetic interference of a heterogeneous power bus where electromagnetic bandgap (EBG) cells are irregularly arranged. To mitigate electrical-noise coupling between high-speed circuits, the EBG structure is placed between parallel plate waveguide (PPW)-based power buses on which the noise source and victim circuits are mounted. We examine a noise suppression characteristic of the heterogeneous power bus in terms of scattering parameters. The characteristics of the dispersion and scattering parameters are compared in the sensitivity analysis of the EBG structure. Electric field distributions at significant frequencies are thoroughly examined using electromagnetic simulation based on a finite element method (FEM). The noise suppression characteristics of the heterogeneous power bus are demonstrated experimentally. The heterogeneous power bus achieves significant reduction of electrical-noise coupling compared to the homogeneous power buses that are adopted in conventional high-speed circuit design. In addition, the measurements show good agreement with the FEM simulation results.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1484-1489
• /
• 2005

An inhomogeneous and anisotropic rock has different properties at different location. Thus, this refers to any of the properties which we may be measuring. There are two concepts of rock mass, namely, CHILE(Continuous, Homogeneous, Isotropic, Linear Elastic) material and DIANE(Discontinuous, Inhomogeneous, Anisotropic, Non-linear Elastic) rock. The former is essentially the properties of intact rock, the latter is essentially the properties governed by the structure of rock. In geotechnical aspect, the most important parameter is strength of rock or rock mass. In particular, characteristics of strength of rock mass depend upon the orientation of discontinuities And this orientation of discontinuities has different properties at different direction of excavation. Therefore, it needs for characterization of different properties of discontinuity orientation against different direction of excavation.

• 한국통신학회논문지
• /
• 제27권2B호
• /
• pp.137-144
• /
• 2002

본 논문에서는 유전자 알고리즘의 진화 연산을 이용하여 기지국의 위치와 송신전력을 최적화하는 알고리즘을 구현하였다. 기지국의 위치와 송신 전력을 실수형 파라미터로 정의하며 관련된 유전 연산자를 설계하였다. 최적화의 방향은 커버리지, 송신 전력, 경제성 효율이 고려되도록 다중 목적함수를 제안하였다. 본 논문에서 구현한 알고리즘음 최적 해를 직관적으로 알 수 있는 상황에 적용하여 검증하였으며 비균일 트래픽 분포를 가정한 상황에 대해 목적함수의 가중치에 따라 최적화를 수행하였다.

• 마이크로전자및패키징학회지
• /
• 제12권3호
• /
• pp.219-226
• /
• 2005

When a ferroelectric film has an inhomogeneous distribution of charged defects, a voltage shift in the polarization curve is induced by the internal field generated in the film. The direction and the magnitude of voltage shift in the P-V hysteresis curves obtained by the Sawyer-Tower method are different from those obtained by the virtual ground method. In this study, the asymmetric behavior in the P-V hysteresis curves of inhomogeneous ferroelectric films was investigated with a physical model and the polarization curves obtained by the Sawyer-Tower and the virtual ground methods are compared.

• 전자공학회논문지A
• /
• 제31A권5호
• /
• pp.39-49
• /
• 1994

In this paper, An inversion technique to reconstruct permittivity profiles of 2-D inhomogeneous dielectric objects by iterativeprocess using the moment-methodand improved newton's algoritham is presented. In order to reduce the noise effect in the scattered fieldon the reconstructed permittivity profiles, the cell size of inversescattering is made be larger than that of forward scattering. Performing numerical calculations of dielectric scatterer it is demonstrated that this inversion is able to reconstruct dielectric objectshaving large size and inhomogeneous characteristics, which is insentive tothe noise effect in the scattered field on the reconstructed result.

• 천문학회지
• /
• 제29권spc1호
• /
• pp.259-259
• /
• 1996

Circumstellar peculiarities of the young Herbig Ae/Be stars are analyzed using high-resolution CCD spectroscopic data, obtained in 1991-1996 at the ESO and the Crimean Astrophysical Observatory (about 450 spectrograms). The results of investigation of the rapid line variability in H$\alpha$, H$\beta$, HeI 5876 and DNaI lines are presented for AB Am, HD 163296, HD 36112, HD 100546, and HD 50138. We conclude that the behaviour of these lines can be explained in the framework of the model containing an equatorially concentrated and azimuthally inhomogeneous stellar wind, and an external cool shell that occasionally looses matter in form of infall onto the star.

• Journal of applied mathematics & informatics
• /
• 제15권1_2호
• /
• pp.127-146
• /
• 2004

In this paper we consider a heat flow in an inhomogeneous. body without internal source. There exists special initial and boundary conditions in this system and we intend to find a convenient coefficient of heat conduction for this body so that body cool off as much as possible after definite time. We consider this problem in a general form as an optimal control problem which coefficient of heat conduction is optimal function. Then we replace this problem by another in which we seek to minimize a linear form over a subset of the product of two measures space defined by linear equalities. Then we construct an approximately optimal control.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.337-341
• /
• 2013

In this study, fatigue crack propagation in composite material under fatigue is investigated by simulation result. When another material on the specimen exists vertically to the crack line, the phenomena that crack may go straight or propagate along the boundary face according to the elastic modulus ratio of another material to matrix are investigated with compact tension specimen by compliance method. Crack propagation direction is evaluated by compliance method. By arranging this study result systematically about the crack propagation behavior due to the stiffness of inhomogeneous material, high-tech material (automobile, aircraft and steel industry) can be improved. The estimation of safety design and life (construction & nuclear power station, etc.) will be of great value industrially.

• Rapid Communication in Photoscience
• /
• 제5권1호
• /
• pp.8-10
• /
• 2016

The potential curves of OH bonds of liquid water are inhomogeneous because of a variety of interactions with other molecules and this leads to a wide distribution of vibrational frequency which hampers our understanding of the structure and dynamics of water molecules. Mixed quantum/classical (QM/CM) calculation methods are powerful theoretical techniques to help us analyze experimental data of various vibrational spectroscopies to study such inhomogeneous systems. In a type of those approaches, the interaction energy between OH bonds and other molecules is approximately represented by the interaction between the charges located at the appropriate interaction sites of water molecules. For this purpose, we re-calculated the values of charges by comparing the approximate interaction energies with quantum chemical interaction energies. We determined a set of charges at the TIP4P charge sites which better represents the quantum mechanical potential curve of OH bonds of liquid water.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.69-73
• /
• 2003

In this paper, a synthesis method for the desired scattering pattern is presented when illuminating by TE-polarized and TM-polarized plane waves to arbitrary dielectric material. It is considered that the one-dimensional dielectric media are inhomogeneously distributed with continuously varying dielectric constants. Accordingly the desired patterns and the corresponding source distributions are inversely transformed by the proposed algorithm which are based on the one-dimensional inverse scattering problem. Some bandstop spatial filter are illustrated for applications.