• 한국산학기술학회논문지
• /
• 제11권5호
• /
• pp.1730-1734
• /
• 2010

원전 2차계통수의 pH를 예측을 위해서는 샘플을 채취, 냉각시킨 후 pH를 측정하게 되는데 이 때 샘플의 온도는 pH를 변화시키는 중요한 요인이 된다. 본 연구에서는 할로겐화 은 광섬유를 이용하여 비접촉식 온도센서를 개발하였고, 열전쌍열을 이용하여 열원으로부터 방출되는 적외선을 측정하였다. 열원과 광섬유 끝단 사이의 거리 및 각도 변화에 따른 광섬유 온도센서의 출력신호를 분석하였으며, 광섬유 온도센서로 측정한 온도범위는 $25{\sim}60^{\circ}C$이다. 본 연구결과를 기초로 원전 2차계통수 pH 샘플의 온도를 측정하기 위해 할로겐화 은 광섬유를 이용한 비접촉식 온도센서의 개발이 가능할 것으로 기대된다.

• 한국군사과학기술학회지
• /
• 제16권5호
• /
• pp.646-652
• /
• 2013

PRA(Position Reporting Accuracy) for EO/IR(Electro-Optic/Infrared) airborne camera is an important factor in geo-pointing accuracy. Generally, rate table is used to measure PRA of gimbal actuated camera like EO/IR. However, it is not always possible to fix an EUT(Equipment for Under Test) to rate table due to capacity limit of the table on the size and weight of the object(EUT). Our EO/IR is too big and heavy to emplace on it. Therefore, we propose a new verification method of PRA for airborne camera and assess the validity of our proposition. In this method we use collimator, angle measuring instrument, 6 dof motion simulator, optical surface plate, leveling laser, inclinometer and poster(for alignment).

• 대한약학회:학술대회논문집
• /
• 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
• /
• pp.235.1-235.1
• /
• 2002

In previous study, we showed the feasibility of the in vivo use of portable near infrared system for the determination of human skin moisture. In order to optimize the acquiring condition of NIR spectrum of skin. skin depth profiling was investigated changing the distance and gap size between illumination and receiving of radiation in the terminal of fiber probe. The colleted light information could be controlled depending the distance and gap of fiber optic probe. (omitted)

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.269-273
• /
• 1990

The proton conserving effect of diffusion with self-aligned SiO2-cladding is investigated by infrared transmission spectra. Based on the proton conserving effect, proton-diffused channel waveguides with self-aligned SiO2-cladding substrates. And an electro-optic cutoff modulator with self aligned electrode that utilizes a single-mode proton-diffused channel waveguide in a Y-cut XX-propagating LiNbO3 substrate is fabricated. Over 20 dB extinction has been achieved with applied voltage of 15V.

• 한국컴퓨터정보학회논문지
• /
• 제20권3호
• /
• pp.57-67
• /
• 2015

본 논문에서는 적외선 영상에서 탐지된 표적의 픽셀정보를 이용하여 실제 환경에서의 표적의 위치를 추정하는 geolocation 기법에 대하여 제안한다. 제안하는 기법은 지대지 전장 환경에서 공중 정찰을 통한 적대 표적의 위치를 파악하는 시스템에 적용이 가능하다. 적대 표적의 geolocation에 영향을 주는 요소는, 시스템의 광학적 왜곡, 지형적 왜곡, 정찰 모듈의 GPS(Global Positioning System) 및 IMU(Inertial Measurement Unit) 왜곡을 들 수 있다. 본 논문에서는 광학적 왜곡과 지형적 왜곡에 적응적인 geolocation 을 위하여 광학 정보의 다항식 최적화와 지구 곡률을 고려한 시선거리 계산 기법을 적용하였으며, 3차원 모의 환경에서 실험한 결과 시스템 요구사항 내에서 geolocation의 정확도를 만족함을 확인하였다.

• 융합신호처리학회논문지
• /
• 제18권1호
• /
• pp.25-30
• /
• 2017

현재 곡물선별기는 대부분 CCD 광학카메라를 이용하여 불량품을 찾아내고 있다. 본 논문에서는 CCD 카메라를 이용함과 동시에 근거리적외선 센서의 수분측정 방법을 추가하여 곡물선별기의 선별력향상을 목표로 한다. 그리고 구현한 알고리즘을 곡물선별기에 실제로 적용할 수 있도록 근거리적외선 영상보드 시스템을 개발하여, 원료의 내부 수분 함량을 고속으로 체크하여 일정함량 미달인 경우 불량으로 간주하여, 불량품을 실시간으로 제거하는 곡물선별기 시스템을 개발하고자 한다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1242-1242
• /
• 2001

The use of fibre optic probes for NIR quality control in the industry is becoming very important, as it provides a powerful tool to reduce sample analysis time and it facilitates the implementation of on-line analyses. However, most of the applications of fibre optics and probes have been done on suspensions, clear liquids and films, chemical and pharmaceutical products and also on fruits and animal products. Traditional applications of near infrared spectroscopy in agriculture have been developed in reflectance mode and calibration transfer could be an interesting way to reduce efforts. Classical methods for calibration transfer between different instruments involve the use of sealed reference cups, but, as fibre optic analysis does not use cups, it is necessary to develop new methods for calibration transfer without standards (Blank et al., 1996). In this paper, we have studied how the most used mathematical pretreatments (three methods of Multiplicative Scatter Correction, Standard Normal Variate, Detrending and derivatives) and their combinations applied to calibration development can contribute to reduce spectral differences between instruments. Calibration equations were obtained for three sets of cereals (barley, wheat and maize) scanned in reflectance mode and then they were validated with samples analysed in reflectance and interactance-reflectance mode (fibre optic). Preliminary results show how some combination of pretreatments reduce the differences in the predicted values, measured as standard error of differences, facilitating the use of calibrations obtained in reflectance for samples analysed by interactance-reflectance. However, the application of pretreatments is not enough to satisfy the control limits for calibration transfer suggested by Shenk et al. (1992), and it should be necessary to combine them with a specific algorithm for instruments standardization.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1993년도 춘계학술대회
• /
• pp.17-20
• /
• 1993

With proper designs of infrared optic system and two dimensional scanning mechanism, a medical infrared imaging system has been developed. The infrared imaging system can be used for two dimensional imaging of surface temperature of human body by measuring the amount of infrared lights radiating from it. It hag been experimentally proven that the degree of temperature measurement accuracy of the developed system is under $0.1^{\circ}C$ with spatial resolution of 1 mrad, image matrix size of $256{\times}240$, and imaging time of 4 seconds.

• 한국생산제조학회지
• /
• 제18권3호
• /
• pp.285-293
• /
• 2009

Thermal infrared cameras have been conducted actively in various application areas, such as military, medical service, industries and cars. Because of their characteristic of sensing the radiant heat emitted from subjects in the range of long-wavelength($3{\sim}5{\mu}m$ or $8{\sim}12{\mu}m$), and of materializing a vision system, when general optics materials are used, they don't react to the light in the range of long-wavelength, and can't display their optic functions. Therefore, the materials with the feature of higher refractive index, reacting to the range of long-wavelength, are to be used. The kinds of materials with the characteristic of higher refractive index are limited, and their features are close to those of metals. Because of these metallic features, the existing producing method of optical systems were direct manufacturing method using grinding method or CAD/CAM, which put limit on productivity and made it difficult to properly cope with the increasing demand of markets. GASIR, a material, which can be molded easily, was selected among infrared ray optics materials in this study, and the optical system was designed with two Aspheric lenses. Because the lenses are molded in the environment of high temperature and high pressure, they require a special metallic pattern. The metallic pattern was produced with materials with ultra hardness that can stand high temperature and high pressure. As for the lens mold, GMP(Glass Molding Press) of the linear transfer method was used in order to improve the productivity of optical systems for thermal infrared cameras, which was the goal of this paper.

• 조명전기설비학회논문지
• /
• 제23권10호
• /
• pp.100-106
• /
• 2009

본 논문에서는 전기설비의 전기적 접속부 또는 전기배선 등에서 발생하는 이상발열을 감지하는 방법에 대해 알아보고, 분전함에서의 발열상태를 실시간으로 모니터링하는 전력설비 진단시스템에 사용되고 있는 광온도센서에 대하여 동작특성을 실험, 분석하였다. 광온도센서의 동작특성 실험을 위한 열원으로는 Black Body와 Hot Plate를 사용하였으며 각각에서의 열원의 온도변화에 따른 광온도센서 출력전압값을 측정, 분석하였다. 그리고 분전함내 차단기 단자에서의 체결불량으로 인한 이상발열 감지 실험을 기존의 발열 감지방법인 열전대와 적외선 열화상장치를 이용하여 실시하였고, 광온도센서를 이용해 실시하여 결과를 비교 분석하였다. 실험결과, 광온도센서의 이상발열 감지능력이 유사함을 확인할 수 있었다. 이러한 분석 결과는 향후 RFID형 광온도센서를 이용한 전력설비 진단시스템의 현장 적용에 있어 기본 자료가 될 것으로 기대된다.