• 제목/요약/키워드: Information of emission

검색결과 1,306건 처리시간 0.028초

ZERO-EMISSION MATERIALS CYCLE IN PRODUCTION PROCESS AND REGIONAL SCALE

  • FUJIE, Koichi
    • 청정기술
    • /
    • 제3권2호
    • /
    • pp.13-24
    • /
    • 1997
  • The present paper aims to give basic information to establish zero emission material cycle including the minimization of emissions from industrial production processes and the area in regional scale. Strategies and methodologies to analyze emissions from the production processes and our human activities and to reduce those emissions by refining and/or replacing the unit process with the alternatives are introduced as well. Quantitative evaluation and management systems of any raw materials and the production process are from vie points of treatment are essential. Estabiishment of a process networking for the recycle of discharged non-products materials by the intra-process, trans-process and the trans-industries are proposed. Procedures and priorities to formulate industrial and regional zero emission system are proposed as well.

  • PDF

면/이동오염원 배출량 공간 할당방식에 대한 고찰 (Considerations in Space Allocation Methods of Emission from Area and Mobile Sources)

  • 김현구
    • 한국환경과학회지
    • /
    • 제11권7호
    • /
    • pp.697-703
    • /
    • 2002
  • In the present study, space allocation methods of pollutant emission from area and mobile sources are assessed by the actual application to air quality modeling of Pohang area. It is found that the TM-based modeling which allocates emission onto the 1km x 1km sized TM-grid system predicts almost the same mean ground-level concentration as that by the GIS-based modeling which uses geographical information of area and mobile sources directly, while maximum ground-level concentration by the TM-based modeling is predicted considerably lower than that by the GIS-based modeling. Moreover, the problem is found that the TM-based modeling causes deviation of mobile roads. In conclusion, it is anticipated to applying GIS-based modeling for a more accurate assessment of air quality in local scale.

예혼합 화염후류에서 열전달이 CO 및 NOx 생성 특성에 미치는 영향 (Effect of Heat Loss on CO and NOx Emission Characteristics in the Postflame Region of Premixed Flames)

  • 김종민;김태현;금성민;김세원;장기현;이창언
    • 한국연소학회지
    • /
    • 제13권4호
    • /
    • pp.1-7
    • /
    • 2008
  • Strict pollutant regulations of NOx emission and increasing awareness of the environmental damage stimulated interest in research to obtain useful information regarding CO and NOx reductions at the same time. In this study, $CH_4$/air premixed flame was examined numerically to reduce CO and NOx emission level simultaneously in the post-flame region by the heat loss models in which radiative and combined conductive and convective heat losses were included. To reduce the NOx emission, first heat exchanger location was decided near the flame. After first heat exchanger was decided for the optimal NOx emission(about 30 ppm), in order to decide the optimal CO emission(about 30ppm), seocond heat exchanger location was tested and decided for several cases. Finally, the optimal location of heat exchanger for minimal CO and NOx emission simultaneously were determined and suggested.

  • PDF

도시패턴과 탄소배출량의 관계 분석 (An Analysis of Relationship between Carbon Emission and Urban Spatial Patterns)

  • 김인현;오규식;정승현
    • Spatial Information Research
    • /
    • 제19권1호
    • /
    • pp.61-72
    • /
    • 2011
  • 전 지구적 기후변화인 지구온난화의 주원인으로 지목되고 있는 온실가스는 공간적으로 주로 도시에서 발생하고 있기 때문에 도시차원에서의 대책이 무엇보다 필요하다. 본 연구는 도시형태와 탄소발생량과의 관계를 분석하여 기후변화에 대응한 탄소배출저감형 도시의 형태를 제시하는 것을 궁극적인 목표로 삼고 있다. 이를 위해, 첫째로 도시형태에 대한 이론고찰을 수행하여 도시공간의 물리적 규모, 이용현황, 활동강도와 관련된 도시형태요소를 선정하였다. 둘째, 서울시를 사례로 전력, 도시가스, 지역난방, 석유, 상수도 사용량 자료를 이용하여 이산화탄소 배출량 지도를 작성하였다. 셋째, 이산화탄소 배출량과 도시형태요소와의 관계를 분석하여 도시공간에서 에너지 사용량에 영향을 주는 도시형태를 밝혀내고, 도시계획 측면에서의 시사점을 도출하였다. 본 연구에서 도시형태 요소와 이산화탄소 배출량간의 관계를 분석한 결과는 실제 에너지 사용량에 기반하여 이산화탄소 배출량을 산정하여 활용하였다는 점에서 기존 연구가 지닌 한계를 극복하고, 사례분석을 통해 구체적이고도 결과를 도출하였다는데 그 의의가 있다.

Spindt Cathode Tip Processing to Enhance Emission Stability and High-Current Performance

  • Spindt, C.A.;Schwoebel, P.R.;Holland, C.E.
    • Journal of Information Display
    • /
    • 제2권3호
    • /
    • pp.44-47
    • /
    • 2001
  • The extracted field emission current can be used to controllably heat microfabricated cold field emission cathode tips. The heating can be sufficient to smooth and recrystallize the tip surface by surface self-diffusion, and at least partially clean the surface of contaminants by thermal desorption. Self-heating not only allows for the achievement and maintenance of stable emission characteristics, but can be used to make the current-voltage characteristics of microfabricated field emitter tips nearly identical to one another. The resulting improvement in emission uniformity will allow for more reliable array operation at increased electron emission current densities.

  • PDF

OBD-II 인터페이스를 이용한 자동차 CO2 배출량 추정 (Estimation of Vehicle's CO2 Emission using OBD-II Interface)

  • 정경권;최우승
    • 한국컴퓨터정보학회논문지
    • /
    • 제16권12호
    • /
    • pp.167-174
    • /
    • 2011
  • 본 논문에서는 차량의 CO2 배출량을 추정하기 위한 방법들을 설명하였다. 전 세계적으로 에너지와 환경의 중요성이 부각되고 있으며 자동차 부문의 기술개발에서도 이 점이 크게 강조되고 있다. 특히 CO2는 지구 온난화에 영향을 미치는 온실가스로 배출 규제 대상이 되고 있다. 차량의 주행 거리에 따른 CO2 배출량 추정 방법, 기후 변화 위원회(IPCC))에서 제시한 CO2 배출량 추정 방법, MAF(Mass Air Flow)와 옥탄의 화학반응식을 이용한 CO2 배출량 추정 방법 등에 대해서 설명하고 각각의 방법들의 성능을 비교하였다. 각각의 CO2 추정 방법들에 대한 성능을 확인하기 위해 실차를 이용하여 약 5km의 도로를 주행하면서 OBD-II 포트로 차량의 진단 정보를 획득하고, 주행 거리, 연료 소모량을 구하였다. 정속 주행에서는 비슷한 CO2 배출량 결과를 얻었고, 급가속 주행에서는 IPCC 방식과 화학반응식 방식이 보다 현실적인 배출량 결과를 보임을 확인하였다.

A Review on the Characteristics of Air Pollutants Emitted from Passenger Cars in Korea

  • Jung, Sungwoon;Kim, Jeongsoo
    • 한국분무공학회지
    • /
    • 제21권4호
    • /
    • pp.223-236
    • /
    • 2016
  • On-road source emissions are major air pollutants and have been associated with serious health effects in Seoul metropolis. Thus, it is of fundamental importance to have an accurate assessment of vehicle emissions in order to implement an effective air quality management policy. As a result, there is a need to overview vehicle emission characteristics of air pollutants. This article discusses vehicle exhaust sampling and chemical analysis, emission characteristics of air pollutants, and emission regulations from passenger cars. The vehicle exhaust sampling and chemical analysis methods were described in particulate matter and gaseous compounds. In this article, chassis dynamometer, measurement instrumentation for nano-particulate matter and carbon compounds analysis device were described. For the gasoline and diesel vehicles, the effective parameters of emissions were average vehicle speed, vehicle mileage and model year. The particle number emissions for diesel nano-particles were sensitive to the sampling conditions. Also, the particle number emissions with a diesel particle filter (DPF) largely reduced rather than those without it. This article also describes different emission characteristics of air pollutants according to biodiesel or bioethanol mixing ratio. The Korean emission standards for passenger cars were compared with those of the US and EU. Finally, the objective is to give an overview of relevant background information on emission characteristics of air pollutants from passenger cars in Korea.

Cluster and information entropy analysis of acoustic emission during rock failure process

  • Zhang, Zhenghu;Hu, Lihua;Liu, Tiexin;Zheng, Hongchun;Tang, Chun'an
    • Geomechanics and Engineering
    • /
    • 제25권2호
    • /
    • pp.135-142
    • /
    • 2021
  • This study provided a new research perspective for processing and analyzing AE data to evaluate rock failure. Cluster method and information entropy theory were introduced to investigate temporal and spatial correlation of acoustic emission (AE) events during the rock failure process. Laboratory experiments of granite subjected to compression were carried out, accompanied by real-time acoustic emission monitoring. The cumulative length and dip angle curves of single links were fitted by different distribution models and distribution functions of link length and directionality were determined. Spatial scale and directionality of AE event distribution, which are characterized by two parameters, i.e., spatial correlation length and spatial correlation directionality, were studied with the normalized applied stress. The entropies of link length and link directionality were also discussed. The results show that the distribution of accumulative link length and directionality obeys Weibull distribution. Spatial correlation length shows an upward trend preceding rock failure, while there are no remarkable upward or downward trends in spatial correlation directionality. There are obvious downward trends in entropies of link length and directionality. This research could enrich mathematical methods for processing AE data and facilitate the early-warning of rock failure-related geological disasters.

지자체 단위의 GIS기반 탄소발생량 추정 (GIS based Estimation of Carbon Emission for a Local Government Unit)

  • 김태훈
    • 대한공간정보학회지
    • /
    • 제19권4호
    • /
    • pp.81-89
    • /
    • 2011
  • 저탄소 녹색성장은 국내외적으로 중요한 이슈가 되고 있으며, 중앙정부 및 각 지자체별로 기본계획 및 데이터베이스를 구축하고 다양한 관련 연구를 진행중이다. 이러한 관점에서 지자체의 탄소배출량 및 탄소흡수량을 계산한 탄소배출총량은 향후 도시계획 및 관리에 있어 중요한 요소가 될 수 있다. 본 연구에서는 경기도를 대상으로 통계자료 및 수치임상도를 이용하여 탄소발생총량을 산출하고 탄소발생환경을 분석해 보았으며, 그 결과 산림면적이 넓고 탄소흡수율이 우수한 품종을 많이 보유한 가평군, 양평군, 연천군, 과천시, 동두천시, 여주군 등의 탄소발생총량이 비교적 적은 것으로 분석되었다. 향후 주기적인 연차별 데이터베이스 구축을 위해서는 위성영상 등을 이용한 탄소흡수량 추정 등이 필요하며, 이러한 기반 자료들은 저탄소 녹색성장을 위한 정책기반자료로서 활용가능할 것이다.

디지털 영상정보의 기술 발전 동향 연구 (A study on Technical Development a Trend of Digital Image Information)

  • 김수용;지석근
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2008년도 춘계종합학술대회 A
    • /
    • pp.755-760
    • /
    • 2008
  • 영상 Display의 시장 동향과 기술 동향에 대하여 기술하였다. 영상 Display 로서는 그밖에 유기 EL(Electroluminescence), FED(Filed Emission Display) 등이 있고 차세대 Display도 개발이 진행되고 있다. 양자 모두 스스로 발광하는 형태를 취하기 위해서는 Back Light가 필요하지 않고, 박형과, 넓은 시야각, 또한 응답 속도가 빠르고 때문에 액정 Display 보다 유리하리라 판단된다.

  • PDF