• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.6
• /
• pp.346-361
• /
• 2013

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2012. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. The conclusions are as follows : (1) The research works on thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and valves, fuel cells and power plants, ground-coupled heat pumps, and general heat and mass transfer systems. Research issues are mainly focused on new and renewable energy systems, such as fuel cells, ocean thermal energy conversion power plants, and ground-coupled heat pump systems. (2) Research works on the heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, and industrial heat exchangers. Researches on heat transfer characteristics included the results for natural convection in a square enclosure with two hot circular cylinders, non-uniform grooved tube considering tube expansion, single-tube annular baffle system, broadcasting LED light with ion wind generator, mechanical property and microstructure of SA213 P92 boiler pipe steel, and flat plate using multiple tripping wires. In the area of pool boiling and condensing heat transfer, researches on the design of a micro-channel heat exchanger for a heat pump, numerical simulation of a heat pump evaporator considering the pressure drop in the distributor and capillary tubes, critical heat flux on a thermoexcel-E enhanced surface, and the performance of a fin-and-tube condenser with non-uniform air distribution and different tube types were actively carried out. In the area of industrial heat exchangers, researches on a plate heat exchanger type dehumidifier, fin-tube heat exchanger, an electric circuit transient analogy model in a vertical closed loop ground heat exchanger, heat transfer characteristics of a double skin window for plant factory, a regenerative heat exchanger depending on its porous structure, and various types of plate heat exchangers were performed. (3) In the field of refrigeration, various studies were executed to improve refrigeration system performance, and to evaluate the applicability of alternative refrigerants and new components. Various topics were presented in the area of refrigeration cycle. Research issues mainly focused on the enhancement of the system performance. In the alternative refrigerant area, studies on CO2, R32/R152a mixture, and R1234yf were performed. Studies on the design and performance analysis of various compressors and evaporator were executed. (4) In building mechanical system research fields, twenty-nine studies were conducted to achieve effective design of mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, renewable energy systems, and lighting systems in buildings. New designs and performance tests using numerical methods and experiments provide useful information and key data, which can improve the energy efficiency of buildings. (5) In the fields of the architectural environment, studies for various purposes, such as indoor environment, building energy, and renewable energy were performed. In particular, building energy-related researches and renewable energy systems have been mainly studied, reflecting interests in global climate change, and efforts to reduce building energy consumption by government and architectural specialists. In addition, many researches have been conducted regarding indoor environments.

• Korean Security Journal
• /
• no.27
• /
• pp.129-159
• /
• 2011

Physical security has always been an extremely important facet within the security arena. A comprehensive security plan consists of three components of physical security, personal security and information security. These elements are interrelated and may exist in varying degrees defending on the type of enterprise or facility being protected. The physical security component of a comprehensive security program is usually composed of policies and procedures, personal, barriers, equipment and records. Human beings kept restless struggle to preserve their and tribal lives. However, humans in prehistoric ages did not learn how to build strong house and how to fortify their residence, so they relied on their protection to the nature and use caves as protection and refuge in cold days. Through the history of man, human has been establishing various protection methods to protect himself and his tribe's life and assets. Physical security methods are set in the base of these security methods. Those caves that primitive men resided was rounded with rock wall except entrance, so safety was guaranteed especially by protection for tribes in all directions. The Great Wall of China that is considered as the longest building in the history was built over one hundred years from about B.C. 400 to prevent the invasion of northern tribes, but this wall enhanced its protection function to small invasions only, and Mongolian army captured the most part of China across this wall by about 1200 A.D. European lords in the Middle Ages built a moat by digging around of castle or reinforced around of the castle by making bascule bridge, and provided these protections to the resident and received agricultural products cultivated. Edwin Holmes of USA in 20 centuries started to provide innovative electric alarm service to the development of the security industry in USA. This is the first of today's electrical security system, and with developments, the security system that combined various electrical security system to the relevant facilities takes charging most parts of today's security market. Like above, humankind established various protection methods to keep life in the beginning and its development continues. Today, modern people installed CCTV to the most facilities all over the country to cope with various social pathological phenomenon and to protect life and assets, so daily life of people are protected and observed. Most of these physical security systems are installed to guarantee our safety but we pay all expenses for these also. Therefore, establishing effective physical security system is very important and urgent problem. On this study, it is suggested methods of establishing effective physical security system by using system integration on the principle of security design about effective security system's effective establishing method of physical security system that is increasing rapidly by needs of modern society.

• The Korean Society of Law and Medicine
• /
• v.19 no.2
• /
• pp.41-72
• /
• 2018

In the division of labor (or teamwork) in medicine, the responsibility of medical and nursing staff should be separated or distributed to justify negligent criminal offenses. The present work refers to the standards by which the due diligence and responsibility of the individual persons are to be determined and delimited. In this context, it has been proven that objective theory as a measure of due diligence is appropriate. From a moral point of view, when assessing due diligence, it makes sense to impose greater individual or higher performance demands on the perpetrator, but law and order require that due diligence should result from socially relevant human behavior. To give objective measure of negligence and to provide the highest level of personal responsibility, so that man can not be burdened too much responsibility and it is accordingly with an equality theorem. Afterwards some points are presented, which should be considered in a concrete fact in the determination of the medical negligence. Medical action has specific characteristics such as professionalism, discretionary and exclusive, unbalance of information. These characteristics distinguish medical actions from general negligence. The general level of knowledge, the urgency, working condition and working environment of the medical facility, duration of the professional practice, assessment of the medical activity are crucial in this context. As a standard of delineation of due diligence, I have used the permitted risk and the principle of trust. In the horizontal division of labor, the principle of trust applies. The principle of trust applies in principle in cases of division of labor interaction, when doctors in the same hospital exercise their own specific occupational field or everyone works in another hospital. However, this is not true for every case. In the vertical division of labor, the principle of trust does not apply and the senior physician can not trust the assistant doctors. In this case, the principle of trust is converted into a duty of supervision for assistant doctors by the senior physician. This supervision requirement could be used as a random check.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.6
• /
• pp.256-268
• /
• 2016

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2015. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering were carried out in the areas of flow, heat and mass transfer, cooling and heating, and air-conditioning, the renewable energy system and the flow inside building rooms. Research issues dealing with air-conditioning machines and fire and exhausting smoke were reduced. CFD seems to be spreading to more research areas. (2) Research works on heat transfer area were carried out in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the economic analysis of GHG emission, micro channel heat exchanger, effect of rib angle on thermal performance, the airside performance of fin-and-tube heat exchangers, theoretical analysis of a rotary heat exchanger, heat exchanger in a cryogenic environment, the performance of a cross-flow-type, indirect evaporative cooler made of paper/plastic film. In the area of pool boiling and condensing, the bubble jet loop heat pipe was studied. In the area of industrial heat exchangers, researches were performed on fin-tube heat exchanger, KSTAR PFC and vacuum vessel at baking phase, the performance of small-sized dehumidification rotor, design of gas-injection port of an asymmetric scroll compressor, effect of slot discharge-angle change on exhaust efficiency of range hood system with air curtain. (3) In the field of refrigeration, various studies were carried in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, a cold-climate heat pump system, $CO_2$ cascade systems, ejector cycles and a PCM-based continuous heating system were investigated. In the alternative refrigeration/energy system category, a polymer adsorption heat pump, an alcohol absorption heat pump and a desiccant-based hybrid refrigeration system were investigated. In the system control category, turbo-refrigerator capacity controls and an absorption chiller fault diagnostics were investigated. (4) In building mechanical system research fields, eighteen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the user and location awareness technology applied dimming lighting control system, the lighting performance evaluation for light-shelves, the improvement evaluation of air quality through analysis of ventilation efficiency and the evaluation of airtightness of sliding and LS window systems. The subjects of building energy were worked on the energy saving estimation of existing buildings, the developing model to predict heating energy usage in domestic city area and the performance evaluation of cooling applied with economizer control. The studies were also performed related to the experimental measurement of weight variation and thermal conductivity in polyurethane foam, the development of flame spread prevention system for sandwich panels, the utilization of heat from waste-incineration facility in large-scale horticultural facilities.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.803-811
• /
• 2021

In this study, the exposure amount of IASCC test worker was evaluated by applying the process simulation technology. Using DELMIA Version 5, a commercial process simulation code, IASCC test facility, hot cells, and workers were prepared, and IASCC test activities were implemented, and the cumulative exposure of workers passing through the dose-distributed space could be evaluated through user coding. In order to simulate behavior of workers, human manikins with a degree of freedom of 200 or more imitating the human musculoskeletal system were applied. In order to calculate the worker's exposure, the coordinates, start time, and retention period for each posture were extracted by accessing the sub-information of the human manikin task, and the cumulative exposure was calculated by multiplying the spatial dose value by the posture retention time. The spatial dose for the exposure evaluation was calculated using MCNP6 Version 1.0, and the calculated spatial dose was embedded into the process simulation domain. As a result of comparing and analyzing the results of exposure evaluation by process simulation and typical exposure evaluation, the annual exposure to daily test work in the regular entrance was predicted at similar levels, 0.388 mSv/year and 1.334 mSv/year, respectively. Exposure assessment was also performed on special tasks performed in areas with high spatial doses, and tasks with high exposure could be easily identified, and work improvement plans could be derived intuitively through human manikin posture and spatial dose visualization of the tasks.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.2
• /
• pp.40-53
• /
• 2019

This study was conducted to investigate the changes in Scenic Spots by utilizing the "Sinjeungdonggukyeojiseungram(新增東國輿地勝覽)" and "Joseonhwanyeoseungnam(朝鮮?與勝覽)" to interpret "Joseonmyeongseungsiseon(朝鮮名勝詩選, 1915)". By examining the historical context when "Joseonmyeongseungsiseon" was published, it documented the Japanese's memories of 'Sino-Japanese War(淸日戰爭)' in 1894, which implies the 'policy of assimilation' by the Japanese Government-General of Korea after the Japanese annexation of Korea(1910). Detailed information about the author 'Narushima Sagimura(成島鷺村)' can be found in preface. In the "Joseonmyeongseungsiseon", it dedicates most of the part in describing the Scenic Spot especially in 'Anseong Do (15 lines)', where has the memories of war such as the 'First Sino-Japanese War'. The number of Scenic Spots, commonly mentioned in both "Sinjeungdonggukyeoji seungram" and "Joseonhwanyeoseungnam" in Cheonan province are 13 in total. Most of the content contains a similar structure. But 'Honggyeongwon(弘慶院)' and 'Seonghwanyeok(成歡驛)' has both the common Joseon Dynasty landscape point of view, and the additional historical context which are about the 'Jeongyujaeran(丁酉再亂)' or 'First Sino-Japanese War' consequently enlightens the 'placeness' of the Scenic Spots. Among the newly described Scenic Spots, 'Anseongdo(安城渡)' is the part that focuses on the memory of the 'Anseongcheon Battle' that gave Japan its first defeat in the Sino-Japanese War. Especially, by introducing the poetry of 'Sinobu Shunpei' it maximizes the appreciation through emphasizing the direct correlation between placeness and the poem itself. While the Joseon Dynasty poems are 10 pieces in total and their title and the subject matters are all related to historical spots, and the appreciation also maximizes when fully interpreted with understanding the historical context. However, it's contextual meanings are neglected by dividing the actual structures into separate pages. When looking at the location of famous historic sites, they come in many different types, considering the location, meaning, size, and conditions surrounding them. It appears as a service space for travelers, a place for sightseeing, relaxation or return, a temple space for paying respects or memorial services, a fortress facility for defense and protection, or a fishing area for wages, and an old battlefield. Especially, it is noted that the area is diverse as the cultural landscape of Cheonan, given that the battle space between the hermitage and the Donghangnongmin(東學農民) is shared with each other. It is necessary to establish policies for the preservation and restoration of local cultural assets based on these points in the future.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.3
• /
• pp.208-241
• /
• 2010

This study was conducted to examine the chronology of Taesil Seokham(Taesil Stone Boxes) stored in Taesil of the Joseon Palace and classify the styles to discuss how these boxes have developed. By doing so, this study defined the archaeological styles of taesil seokhams in the chronological order. Although taesil seokhams are placed when taesil are first created, they do not have any texts engraved on them and it is difficult to gain information only from examining taesil seokham. However, Taejiseok(memorial stones buried in Taesil) and Agibi(gravestones buried in Taesil) were created along with taesil. These resources were examined and compared with literature records to find when each taesil seokhams was created. The critical elements to consider for the chronological arrangement were both the cover and container of the boxes and the transition of their style could be classified into four major stages. In detail, the Joseon Dynasty's taesil seokhams initially inherited the style of the Goryeo Dynasty to be formed into rectangular boxes. Through the transition of the mid and late 15th Century, the semi-circular cover with cylindrical container became the popular style in the late 15th Century. In the late 16th Century, the style of the previous period was further developed to add some decorative elements, such as projecting ornaments, but the ornaments were added for functional purposes rather than artistic purposes. However, the style went back to the semi-circular cover with cylindrical container in the early 17th Century. From the mid 17th Century, various styles appeared with ornaments only on the cover, cone-shaped cover with no ornament, or mortar-like container. However, a new style of cone-shaped cover with ornament emerged between the early and mid 18th Century and continued to stay until the mid 18th Century. In the mid 18th Century, the cover remained unchanged, but the container became a keyhole-shaped space with one side forming a "ㄷ" shape. However, in the late 18th Century, the most typical style of the semi-circular cover with cylindrical container reappeared to show that this is the most universal style. Last, in the mid 19th Century, the cover changed from semi-circular to rectangular with flat top. After this, the taesil seokhams began to disappear. In terms of style, it can be classified into four stages. In the early Joseon Dynasty, the taesil seokhams were underdeveloped and inherited the style of the Goryeo Dynasty (Stage I; 1401~mid-15C), but Joseon's unique style began to develop from the late 15th Century (Stage II; 1477~1641). After that, partial ornaments were added for adornment (Stage III; 1660~1754), but the typical style reappeared in the late 18th Century to finally degrade in the late Joseon Dynasty of the mid 19th Century (Stage IV; 1790~1874). This arrangement of style and chronology would greatly help archaeologists anticipate the time and owner of taesil seokhams even if only taesil seokhams are discovered without any records. * Tae(胎) : Placenta and umbilical cord * Taesil(胎室) : A facility(chamber) of burying Tae(胎) in rite when royal descendants are born.

• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.292-304
• /
• 2011

The purpose of this study is to draw institutional implications for tree cutting permit system improvement in comparison with Korea and foreign countries (German, Japan). A survey about recognition of cutting system and cutting-invigorating factors for two groups in charge of work for cutting permit (forest-official) and cutting operation (forest owner, tree butcher, forestry association, and forestry corporation) was carried out. The survey provides basic information which is necessary to improve current cutting system. The result of analysis about both German and Japan's cutting system show that clear cutting area to hinder function of forests tends to decrease and flexible final age of maturity considering condition of regional forest not uniform cutting age were applied. As a result of German and Japan's cutting system review flexible cutting system on regional characteristics is used to manage for the purpose of forest regeneration. The survey result about awareness and invigorating factors of cutting system represents that only public official group said final age of pine tree (3.13) and cedar (3.05) was proper and final age of other species of trees should have shortened. In matters of cutover area, current standard is less than 5ha per a felling area and the largest total area limit is 30 ha, only tree butcher, forestry corporation said cutover area must expand. Invigorating factors of current cutting system are reinforcement of cutover area, facility support, enrichment of technical training, increase of equipment support, simplification of administrative procedures, and provision of various benefits. The reinforcement of technical training among them especially represents the statistical significance of the participants' differential recognition.

• Journal of Bio-Environment Control
• /
• v.31 no.3
• /
• pp.246-254
• /
• 2022

Domestic facility agriculture grows rapidly, such as modernization and large-scale. And the production scale increases significantly compared to the area, accounting for about 60% of the total agricultural production. Greenhouses require energy input to create an appropriate environment for stable mass production throughout the year, but the energy load per unit area is large because of low insulation properties. Through the rooftop greenhouse, one of the types of urban agriculture, energy that is not discarded or utilized in the building can be used in the rooftop greenhouse. And the cooling and heating load of the building can be reduced through optimal greenhouse operation. Dynamic energy analysis for various environmental conditions should be preceded for efficient operation of rooftop greenhouses, and about 40% of the solar energy introduced in the greenhouse is energy exchange for crops, so it should be considered essential. A major analysis is needed for each sensible heat and latent heat load by leaf surface temperature and evapotranspiration, dominant in energy flow. Therefore, an experiment was conducted in a rooftop greenhouse located at the Korea Institute of Machinery and Materials to analyze the energy exchange according to the growth stage of crops. A micro-meteorological and nutrient solution environment and growth survey were conducted around the crops. Finally, a regression model of leaf temperature and evapotranspiration according to the growth stage of leafy vegetables was developed, and using this, the dynamic energy model of the rooftop greenhouse considering heat transfer between crops and the surrounding air can be analyzed.