• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.306-314
• /
• 2020

The use of synthetic resins in ceramic restoration poses several challenges, including aging and potential damage to artifacts, which has raised the need to investigate new materials and restoration methods. This study set out to incorporate full color 3D printing into the 3D digital technology-based restoration method, an emerging approach currently being researched, and to print out missing parts with color information. After examining material physical properties with an experiment, the investigator printed out missing parts from a white porcelain vessel and grayish-blue-powdered celadon plate and compared them in chromaticity and brilliance. The experimental results show that the outputs had comparable tensile strength to the original restoration materials, whereas the recorded compressive strength was approximately 1.4~2 times higher than that of the original restoration materials. According to the NIST table of color difference values, the white porcelain vessel was visible at ΔE^*ab 1.55, and the grayish-blue-powdered celadon plate was perceivable at 3.34. Even though it was impossible to express the colors accurately owing to printer limitations, this non-contact approach reduced the possibility of damage to the minimum. In conclusion, it can be applied to objects with a high chance of damage or generate display effects through purposeful color differentiation in missing parts.

• Analytical Science and Technology
• /
• v.30 no.5
• /
• pp.279-286
• /
• 2017

Determination of the order of latent fingerprints deposition on the surface of thermal paper, often found in crime scenes, is related to the study of time course and aging of fingerprints and can provide additional information in criminal investigations. A preliminary study was performed to determine the deposition order of fingerprints left with two different conditions of deposition pressure and time (in seconds) after 1 day intervals for 7 days on thermal paper (receipt and fax thermal paper) using an iodine fuming method. The resultant images of the visualized fingerprints were analyzed with densitometric image analysis to measure the changes in the areas of the ridges, which can be correlated to the deposition order. No significant variation was found with the different types of thermal paper. The average areas of the friction ridges increased gradually or were similar to the values from day 1 for 3 days, and then a continual decrease was shown from day 4 through day 7. The area values from day 6 and day 7 were less than half of those from day 1. Furthermore, the test with overlapped fingerprints showed the possibility of differentiation between fingerprints that are 1-3 and 6-7 days old based on the clarity visible to the naked eye. Additional experiments with the deposition conditions can prove that the current method is valuable for the determining the order of fingerprint deposition on thermal paper.

• Journal of Internet Computing and Services
• /
• v.20 no.6
• /
• pp.143-156
• /
• 2019

Discussion on OTT regulation has become fiercer, as OTT services' impacts on the global and domestic media market have been exponentially growing. In South Korea, it is argued that, on the basis of the similarity between television program and OTT's video content, OTT needs to be regulated in order to protect fair competition and to control sociocultural effects. In many of the discussions, developed countries' cases have been used for supporting OTT regulation. In this paper, we first analyzed the global OTT market trends based on our own categorization of OTT services. then we assessed the validity of the application of the foreign cases in the current OTT regulation debates in Korea. We proposed six OTT types (aggregation, mediation, mediation-aggregation, multi-screen, outlet, and outlet-linear) simultaneously considering service operator' origin, business model, content format, and content delivery. These services have been consistently evolving, and the OTT market has been increasingly competitive especially around content differentiation. Regulators must be wary of hastily introducing competition regulation to the dynamically innovating OTT market. The foreign cases, including the US, EU, the UK, and Japan, hardly seem to be appropriate bases for strengthening OTT regulation. Rather, they were focused more on promoting competition in the domestic media market and enriching the content ecosystem. Therefore, we need to consider revision of the outdated media regulation frameworks instead of fitting OTT under them, and to recognize the priority of securing practical jurisdiction on global service providers before capturing local players into the conventional regulation systems.

• Archives of design research
• /
• v.11 no.1
• /
• pp.143-152
• /
• 1998

Recently, rapidly increa~ing internet Websites are providing us with the new kinds of multimedia infonnations without borders acting as the center for exchanging informations. Such new media infonnations through the internet passes infonnations via light on the monitor and provides the various infonnations, with the differentiation from the traditional printing media, it can be searched with electronic commands in limited space. In the process of adapting the new technologies, new media has successfully responded to the fast change and the development of its needs by experiencing the trials and errors, steadily establishing the stable position with its new infonnation transferring and exchanging methods. The representative hompage of websites of information lransfonnations means the first page containing no lower directories and consist of titles, icons, symbols and addresses and can design them in consideration of graphical process, planning, contents and others. Such hompages are very important since the graphical images shows its visual expressions deciding the total meanings of the hompages. In this research, we have analyzed the relationships between its overall colors and text colors from randomly picked hompages of websites in the internets of various areas. Generally, the homepages are designed with graphical expressions in personal way and the feedbacks and responses of such may differs, but this can be used as reference materials for the analysis of new media in objective way. Also, it can be used as the base informations for arrangement and planning of designs with the characteristics of graphics and Graphical User Intertilces in the backhlfound which are implemented over internet.

• KSBB Journal
• /
• v.24 no.3
• /
• pp.259-266
• /
• 2009

AfsR2 in Streptomyces lividans, a 63-amino acid protein with limited sequence homology to Streptomyces sigma factors, has been known for a global regulatory protein stimulating multiple antibiotic biosynthetic pathways. Although the detailed regulatory mechanism of AfsK-AfsR-AfsR2 system has been well characterized, very little information about the AfsR2-dependent down-stream regulatory genes were characterized. Recently, the null mutant of afsS in S. coelicolor (the identical ortholog of afsR2) has been characterized through DNA microarray system, revealing that afsS deletion regulated several genes involved in antibiotic biosynthesis as well as phosphate-starvation. Through comparative DNA microarray analysis of afsR2-overexpressed S. lividans, here we also identify several afsR2-dependent genes involved in phosphate starvation, morphological differentiation, and antibiotic regulation in S. lividans, confirming that the AfsR2 plays an important pleiotrophic regulatory role in Streptomyces species.

• Journal of Distribution Science
• /
• v.15 no.3
• /
• pp.61-72
• /
• 2017

Purpose - The ICT development is affecting the consumer behaviors in selecting channel or distribution system. This study aims to advance the theory on the influence and interaction with omni-channel behaviors. Specifically, analyzing moderating variable is category knowledge that effect between propensity of brand loyalty and its precedence factor which is perceived difference, perceived value, authenticity and consumer-brand relationship. Research design, data, and methodology - The subject of this research is consumers who purchase goods in omni-channel situation. The hypothesis of this research is derived from the literature of the preceding research analysis on brand loyalty, omni-channel and consumer behaviors. This study have constructs that were defined operationally with reference to previous studies, and the research model was designed to figure out the structural relationship among perceived difference, perceived value, authenticity, consumer-brand relationship and brand loyalty. From 2016 Sept. 1 to Dec. 31, a questionnaire survey was performed targeting customers using omni-channel. 327 questionnaire survey had conducted. 316 survey data were used for empirical analysis except data that had missing and wrong value. AMOS(structural equation) was used to confirm the hypothesis which developed by researcher. Results - The results of this study are as follows. First, an authenticity has significant effect on brand loyalty. Second, in the omni-channel situation, but perceived differentiation, perceived value, consumer-brand relationship does not affect brand loyalty. According to this result, it is judged that it is easy to search for information in the situation of omni-channel and integrated decision making is done without distinction between channels. Third, category knowledge has moderating effect between brand loyalty and precedence factors. When the category knowledge level is low, preceding factors have a significant effect on brand loyalty. when the category knowledge level is high, the preceding factors did not have a significant effect on brand loyalty except the authenticity. Conclusions - This study finds out omni-channel's phenomenon is different from other distribution channel phenomenon. In the situation of omni-channel, it is suggested that brand loyalty may be relatively low for a certain brand because it raises the knowledge level of the category. Then this study provides a managerial implications based on the role of the moderate effect on category knowledge, brand loyalty and omni-channel.

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.4
• /
• pp.817-831
• /
• 2014

In this paper insights from studies on the middle income trap and value chains analyses are combined to investigate one particular industry in one particular region: the sugarcane industry in Northeastern Thailand. Focusing on this region enables an in-depth focus on geographical differentiation of the middle income trap. The empirical outcomes demonstrate that policymakers involved with sugar should look at the particular challenges in Northeastern Thailand: 1. The role of brokers which is unaddressed in the current regulatory environment; 2. A lack of information of the regulatory environment among growers; 3. Distrust between growers and millers; 4. Alack of implementation of R&D efforts; 5 .A lack of support from associations; 6. The labor shortage problem, and 7. No incentives for growers, brokers and millers to improve quality and embark on upgrading. Since agricultural value chains in Southeast Asia often start in relatively poor rural areas it is imperative that policymakers balance the interests of upstream, midstream and downstream actors. Unfortunately, this is rather difficult as midstream actors (millers) and wholesalers are powerful and therefore, are in the best position to defend their interests. Our insights could function as comparative material for similar studies within other Southeast Asian upstream value chains.

• Applied Microscopy
• /
• v.37 no.3
• /
• pp.185-198
• /
• 2007

Spermiogenesis in Japanese white-toothed shrew. Crocidura dsinezumi was investigated by transmission electron microscope. Spermiogenesis was divided into 12 phases 14 steps, based on the morphological features of the nucleus and change of organelles in cytoplasm. The nucleus of spermatids in Golgi (step $1{\sim}2$) phase were spherical; however, they were changed into oval in the cap (step $3{\sim}6$) phase. Flagellum appeared in the middle of acrosomal phase; on the other hand, slender and long spermatid head was formed in maturation phase. The head of spermatids faced the lumen in step 1 to step 6 (from Golgi to cap phase), but, in step 7 to step 14 (from acrosomal to spermiation phase), it turned its head to the basal lamina of the seminiferous epithelium. The nucleus and acrosome were elongated maximally in step 10. The condensation of chromatin started in late acrosomal (step 10) phase, and it was completely finished and homogenized in the middle of maturation (step 12) phase. Multivesicular body appeared near the acrosomal vacuole during the middle cap (step 5) phase, and a large number of them were observed near the Golgi apparatus in the late cap (step 6) phase. Considering all the results, the spermiogenesis might be useful information to analyse the differentiation of spermatogenic fells.

• Korean Journal of Plant Resources
• /
• v.26 no.5
• /
• pp.619-627
• /
• 2013

Deutzia paniculata Nakai is a Korean endemic species that has a very restricted distribution in Gyeongsang-do, South Korea. The genetic diversity and structure of five populations of D. paniculata were investigated using 31 ISSR loci from six primers. The Shannon's index (0.429) and genetic diversity (0.271) were relatively higher than those of other rare plant species in Korea. The Miryang (MY) and Yangsan (YS) populations, which have higher flowering rates than the other populations, showed greater genetic diversity than the other populations. An analysis of the molecular variance (AMOVA) showed that 16% of the total variation could be attributed to differences among the populations, and 84% to the differences within populations, indicating moderate gene flow among adjacent populations. The high genetic diversity and low genetic differentiation in the Deutzia paniculata populations, which have a restricted distribution, is considered to be affected by outcrossing of the mating system and abundant individuals in the populations. These results suggest that ex situ conservation strategies are needed to sustain the current genetic diversity of D. paniculata.

• Journal of Life Science
• /
• v.28 no.10
• /
• pp.1140-1146
• /
• 2018

Dual-specificity phosphatases (DUSPs) play a role in cell growth and differentiation by modulating mitogen-activated protein kinases. DUSPs are considered targets for drugs against cancers, diabetes, immune diseases, and neuronal diseases. Part of the DUSP family, DUSP19 modulates c-Jun N-terminal kinase activity and is involved in osteoarthritis pathogenesis. Here, we report screening of cavity-creating mutants and the crystal structure of a cavity-creating L75A mutant of DUSP19 which has significantly enhanced enzyme activity in comparison to the wild-type protein. The crystal structure reveals a well-formed cavity due to the absent Leu75 side chain and a rotation of the active site-bound sulfate ion. Despite the cavity creation, residues surrounding the cavity did not rearrange significantly. Instead, a tightened hydrophobic interaction by a remote tryptophan residue was observed, indicating that the protein folding of the L75A mutant is stabilized by global folding energy minimization, not by local rearrangements in the cavity region. Conformation of the rotated active site sulfate ion resembles that of the phosphor-tyrosine substrate, indicating that cavity creation induces an optimal active site conformation. The activity enhancement by an internal cavity and its structural information provide insight on allosteric modulation of DUSP19 activity and development of therapeutics.