• 한국인쇄학회지
• /
• 제28권1호
• /
• pp.1-13
• /
• 2010

Gravure printing and manufacturing of advanced electronic components in a way that is going extra hold position. It is to print the electronic components of the rapid productivity improvements as well as cost-saving and environment-friendly industries such as the transition is a big advantage. However the mechanism of gravure is difficult to study scientifically because of high speed and excessively small size of the cell. To approach the mechanism we experimented using gravure printability. The condition of variables of IGT is pressure and velocity. By using Flow-3D simulation software, we built up the theoretical model under the constant variables. Then, we compared the real test with the simulation results. Therefore, it is studied the mechanism of gravure scientifically and it can be analysed the effect of the variable conditions.

• 한국전자통신학회논문지
• /
• 제7권5호
• /
• pp.1103-1108
• /
• 2012

최근 P2P 기술을 이용한 연구가 증가되고 있다. 이러한 P2P 시스템에서 컨텐츠 정보 제공의 역할을 하는 서버와 피어들로 구성된 P2P 시스템은 일반적인 자원 보유 서버로 구성된 시스템에 비해 서버의 부하가 적다. 본 논문은 소셜 네트워크 P2P 시스템 기반의 효율적인 메뉴 제공을 위한 시스템을 제안한다. 본 연구의 목적은 시각 정보 기반의 가격 결정 메뉴의 사용을 확대하는 것이다. 이 시스템은 우수한 성공률을 보이는 이전 연구를 기반으로 하고 있다. 따라서 이 시스템은 P2P 서버의 사용으로 영세한 중소업종에 적합하다. 이 시스템은 이전 연구에 비해 사용성이 높아졌다.

• 인터넷정보학회논문지
• /
• 제18권2호
• /
• pp.31-42
• /
• 2017

인터넷 뱅킹 서비스가 보편화되면서 많은 사용자들이 온라인을 통한 재화의 교환이 가능하였다. 하지만 이러한 이점에도 불구하고 인터넷 뱅킹 서비스에서 존재하는 보안위협에 의하여 사고사례가 지속적으로 발생하는 실정이다. 이러한 문제점을 보완하기 위하여 인터넷 뱅킹 서비스의 전 구간에 걸쳐 다양한 보안기술이 적용되었으며, 본 논문에서는 금융기관 구간과 네트워크 구간에 적용된 보안기술에 대한 조사 결과를 서술한다. 본 논문의 결과를 통하여 내부자에 의하여 발생하는 피해사례와 구현과정에서의 취약점으로 인하여 발생하는 위협에 대응하기 위한 참고 자료로써 활용 가치가 있을 것으로 사료된다.

• 디지털융복합연구
• /
• 제12권4호
• /
• pp.305-310
• /
• 2014

우리는 현 사회를 컨버전스 시대라 말하고 있다. 이러한 컨버전스 기술의 파급효과 및 컨버전스 사회의 현상들은 이미 경제, 사회, 문화등 사회의 전 부분에서 가시화되고 있다. 정부에서는 2011년에 기술 수요도가 높은 10개 ICT 산업군(IT-Car, IT-Ship, IT-Building, IT-Robots, IT-Textile, IT-Medicine, IT-Lighting, IT-Energy, IT-Defence)을 대상으로 한 "IT 융합 기술예측조사 2025"를 발표하였다. 본 연구에서는 우리의 일상적인 생활공간과 밀접하게 연관되어 있는 스마트시티에 대하여 외국의 사례들을 알아보고 우리 정보통신 기술의 진출 가능성 등을 기술하였다.

• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.836-842
• /
• 2010

Safety system including location monitoring system for blasting workers was studied. Positioning performance of the location monitoring system was highly dependent on communication protocol and the number of access points in the blasting cell. RTLS(Real Time Location System) is an important technology to develop the location information of workers and variously used to enhance workers safety. Location monitoring system with Cell-ID and RSSI wireless communication technology was verified to have a proper positioning performance for the steel block application.

• 한국의류산업학회지
• /
• 제13권3호
• /
• pp.373-381
• /
• 2011

This study focused on investigating factors of partnership formation for transactional enterprises on supply chain to form a transactional relationship centering around textile industry in Daegu and Gyeongbuk. The study also investigated the effect of the factors of partnership formation for mutual cooperation among textile manufacturers in Daegu and Gyeongbuk on partnership outcomes, and finally provided basic information that help enterprises form efficient partnership relationships with related manufacturers. The sample of the study was manufacturers of yarn, dyeing, weaving, process and fabrics in Daegu and Gyeongbuk that are registered on Korea Federation of Textile Industries. The total of 81 responses were used for data analyses, and factor analyses, regression analyses, and ANOVA were utilized appling SPSS 14.0 Package. The results of the research were as follows: First, among partnership formation factors mutual confidence was highly related to presentation of exclusive technological information, efforts to keep relationships between enterprises, presentation of information, and transactions between reliable enterprises that were formed despite of any losses. Second, it was also important that enterprises exchange and communicate their business goals with partners by having common goals. Third, it was also important that problems and damages were informed to and were shared with transaction companies. If conflicts between enterprises occurred, they can be smoothly solved based on the partnership formation. Fourth, enterprises form partnerships with transaction companies by considering their operation abilities. Fifth, transactions with enterprises which are mutually reliable and have superior technology and information contributed a lot to economic outcome. Lastly, the study revealed that among partnership formation factors mutual confidence to transaction companies influenced outcome of mutual confidence profit creation, outcome of technology & information efficiency were closely related to the ability to solve generated problem, and an important factor of the outcome of technology & information profit creation was communication.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.147-151
• /
• 2005

CAN(Controller Area Network) is a simple and efficient network system for real time control and measurement. As it is not only good at error detection but also strong in electromagnetic interference, CAN has been widely used all over the industries. Basically, CAN needs a master node in charge of sensor data collection, node scheduling for data transmission to a monitoring system and error detection. According to the number of mater nodes, the CAN system is classified into two type of master system. One is a single master system that has only one master node and the other is a multi-master system where any sensor node can become a master node depending on the system's conditions. While it has the advantage of its fault tolerance, the multi-master system will suffer form the overall performance degradation when a defect is found in the master node. It is because all sensor nodes pertaining to a defective master node lose their position. Moreover, it is difficult and expensive to implement. For a single master system, the whole system will be broken down when a problem happens to a single master. In this paper, a dynamic master system is presented that there are several sub-master nodes of which basic functions are those of other sensor nodes at ordinary times but dynamically changed to replace the failing master node. An effective scheduling algorithm is also proposed to choose an appropriate node among sub-master nodes, where each sub-master node has its precedence value. The performance of the dynamic master system is experimented and analyzed.

• Journal of Information Technology Applications and Management
• /
• 제13권1호
• /
• pp.95-116
• /
• 2006

Many SMEs have adopted ASP models which have brought various benefits to SMEs such as decreasing the total cost, using new IT technology, enhancing the maintenance, and implementing the information systems rapidly. Ministry of Information and Communication had implemented the ASP diffusion project for the ASP venders and SMEs between 2001 and 2003. As results of this project, various industries adopted the ASP applications of which the performance was enhanced, and then the competitiveness of the ASP vendors in Korea was increased. The purpose of this study is to make a strategy of the penetration into China market for ASP services which have competitive advantages. This study uses various research methods such as questionnaire survey, visiting SMEs in china and making interviews. This study shows the current status of Chines ASP market, the several cases of using ASP services, and questionnaire analyses(service recognition, service requirement and factors and infrastructure, business environment and supporting organizations etc) of ASP demand. And finally this study proposes several strategic considerations in entering China market and suggests several support policies for supporting Korean ASPs.

• 지역연구
• /
• 제34권4호
• /
• pp.61-74
• /
• 2018

본 연구의 목적은 스마트시티 산업의 융합변화를 분석하는 것이다. 스마트시티의 연관 산업은 정보통신기술 및 지식 기반의 건설 산업으로 정의할 수 있다. 본 연구는 1980년, 2014년 한국은행에서 발표한 산업연관표를 이용하여 투입산출분석과 구조경로분석을 수행하였다. 산업연관표 자료는 2개년도 비교분석을 위해 국내총생산 가격수정인자(GDP Deflator)가 적용되었다. 산업의 분류는 403개 산업을 기준으로 27개 그리고 8개 산업으로 분류되었다. 분석 결과는 다음과 같다. 첫째, 투입산출계수 분석에 따르면, 정보통신 서비스 산업(ITS)과 에너지 공급 산업(EnS)은 건설 산업에 투입량이 증가되었다. 반면에 지식 서비스 산업(KS)과 기타 서비스 산업(EtS)은 감소하였다. 둘째, 생산유발계수 분석 결과, 건설 산업(C)은 정보통신 서비스 산업(ITS), 에너지 공급 산업(EnS), IT 제조 산업(ITM) 그리고 비 IT 제조 산업(NITM) 순으로 직 간접적인 영향을 미쳤으며, 가장 큰 변화량을 보인 산업은 정보통신 서비스 산업(ITS)으로 분석되었다. 셋째, 구조경로분석 결과, 스마트시티 산업은 117개의 새로운 생산경로를 만들었으며, 구조적 세분화를 이끌어내고 있었다. 산업의 융합변화는 정보통신 서비스 산업(ITS), 에너지 공급 산업(EnS), 비 IT 제조업(NITM), IT 제조업(ITM)을 중심으로 진행되고 있었다.

• Journal of information and communication convergence engineering
• /
• 제21권2호
• /
• pp.152-158
• /
• 2023

In recent years, as computer-generated imagery has been applied to more industries, realistic facial animation is one of the important research topics. The current solution for realistic facial animation is to create realistic rendered 3D characters, but the 3D characters created by traditional methods are always different from the actual characters and require high cost in terms of staff and time. Deepfake technology can achieve the effect of realistic faces and replicate facial animation. The facial details and animations are automatically done by the computer after the AI model is trained, and the AI model can be reused, thus reducing the human and time costs of realistic face animation. In addition, this study summarizes the way human face information is captured and proposes a new workflow for video to image conversion and demonstrates that the new work scheme can obtain higher quality images and exchange effects by evaluating the quality of No Reference Image Quality Assessment.