• The KIPS Transactions:PartC
• /
• v.16C no.5
• /
• pp.621-628
• /
• 2009

Wireless sensor networks (WSNs) have been considered as a promising method for reliably monitoring both civil and military environments under hazardous or dangerous conditions. Due to the special property and difference from the traditional wireless network, the lifetime of the whole network is the most important aspect. The bottleneck nodes widely exist in WSNs and lead to decrease the lifetime of the whole network. In order to find out the bottleneck nodes, the traditional centralized bottleneck detection method MINCUT has been proposed as a solution for WSNs. However they are impractical for the networks that have a huge number of nodes. This paper first proposes a distributed algorithm called DBND (Distributed Bottleneck Node detection) that can reduce the time for location information collection, lower the algorithm complexity and find out the bottleneck nodes quickly. We also give two simple suggestions of how to solve the bottleneck problem. The simulation results and analysis show that our algorithm achieves much better performance and our solutions can relax the bottleneck problem, resulting in the prolonging of the network lifetime.

• International Commerce and Information Review
• /
• v.12 no.3
• /
• pp.391-412
• /
• 2010

As traditional import regulations have decreased all over the world in recent decades, the usage of "unconventional" trade protection measures has grown in the developing countries. In particular, antidumping investigations have risen rapidly and have growing in India and China. Therefore, this thesis aims to provide countermeasures to our government and Korean exporting companies by studying characteristics of antidumping. India is one of the most frequent initiators of antidumping cases by protecting their industries and impeding imports from FTA. This year, economic exchanges of Korea and India will be increasing by the conclusion of CEPA. This will lead to the increase of dispute by import regulations. Under such circumstances, to decrease Indian antidumping cases Korea will respond as follows. i)If antidumping laws, system and practice of India have injustice or are different from WTO rules, our government will have to indicate injustice and actively urge Indian government to make corrections. For example, they are continuous bilateral contact about the problems, fallacy of calculation of dumping margin, and intense investigations into cause and effect relationship and losses in dumping market, ect. ii)Our government should give more support to the small and medium exporting company which have difficulties in dealing with trade conflicts, counseling, arbitrating a lawyer. iii)Our government which is in control of domestic trade relief system should strengthen its investigation ability about new regulations and moniter import regulations of India. Over the long time, Korean companies need to export competitive advantage items of a higher value-added business and build solidarity by technology transfer. Accordingly, that will result in the decrease of trade dispute in India.

• International Commerce and Information Review
• /
• v.15 no.2
• /
• pp.71-82
• /
• 2013

The automotive supply chain is increasingly complex as automakers seek more profitable solutions with global out-sourcing and manufacturing strategies. In the automotive industry, using returnable plastic containers (RPCs) is very common for domestic operations, but for internationally, it has not been considered by many companies because of issues such as overall distance and difficulty of control. The results of this simulation can help to analyze the interactive and coherent behavior of packaging and supply chain systems. The data obtained from the model can be applied to make substantial decisions for choosing the most profitable packaging types, at the same time as it can lead to designing an optimum supply chain for RPCs used in international supply chains.

• Management & Information Systems Review
• /
• v.32 no.2
• /
• pp.83-106
• /
• 2013

This study testified the influence factors like quantities of advertising, number of hardware and software that are converged, effect on feature fatigue of convergence product. When consumers perceive higher numbers of hardwares in a smart phone, they feel its higher usefulness and complexity. This means that numbers of hardwares is the major factor that enhances consumer's usefulness but, at the same time, it cause perceived leads to higher usefulness in using smart phone, it didn't effect on complexities. It is also important strategy for smart phone companies to provide a lot of useful softwares(applications) to satisfy consumers. Finally, complexity was important factor that lead to higher feature fatigue of consumers. This indicates that smart phone companies have to find adequate numbers of convergence for their new smart phone.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12B
• /
• pp.735-742
• /
• 2007

We propose an effective packet marking algorithm for video streaming in DiffServ network. Because legacy packet markers such as srTCM(single rate three color marker) cannot distinguish the importance of packet, these markers can cause quality degradation of streaming during the network congestion period. Recently proposed TMS (Two Marker System) [4] shows effectiveness in such scenario that video streaming service is struggling with other types of service traffic. However, if many video streaming services co-exist in DiffServ network and result in competition among themselves, then both legacy packet markers and even TMS cannot prevent drastic streaming quality degradation. To cope with this, we suggest A-TCPM (Adaptive time sliding window Three Color Marker) algorithm. In this algorithm, an A-TCPM module decides the color of a racket based upon the probability which is lead by current channel status and frame importance ratio. Simulation results show that proposed A-TCPM algorithm can enhance streaming service quality especially when overbooked video streaming sessions struggle with themselves.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.159-167
• /
• 2013

In stereo-view system, variations of target camera position or lighting conditions cause discrepancies on the luminance and chrominance components of stereo views. These discrepancies lead to inaccurate frame view prediction and low quality of 3 D video coding. In this paper, an efficient histogram interval calibration method is proposed for stereo-view coding, so as to compensate for the luminance component of target view. First the proposed method is analyzed by the histogram of the target image frame. Then, it divide two sections of histogram of that frame to correct the color discrepancies. Secondly, each section of the target frame is corrected the luminance component by identify the maximum matching region between the reference frame and the target frame. We have verified our proposed histogram matching method in comparison with the other color correction ones. Experimental results show that it can correct better luminance calibration results of PSNR(Peak Signal to Noise Ratio) and has less computation time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.333-336
• /
• 2001

The transient response in PDFA(Praseodymium-Doped Fiber Amplifier) is theoretically investigated. The PDFA has the spectral gain band in 1.3${\mu}{\textrm}{m}$. The transient model includes the transient buildup of the population inversion, the pump power, and the signal power and their transient variation along the fiber amplifier. The numerical analysis of transient model can predict the gain saturation, the variation of pump power and the gain as a function of the fiber length. It also shows the gain saturation and recovery effects depending on the pumping rate lead to distortion and saturation in the amplification of optical pulse. The results of numerical analysis, for the case of the Pr ion concentration of 1000ppm and the pump power of 0.5W the gain saturation is obtained 30dB at the length of 5m and the saturation time of upper level is 250 $mutextrm{s}$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1825-1830
• /
• 2015

In some cases, despite the pedestrian jaywalking pedestrian traffic lights to red, or even wait for the walk signal to stand down in the driveway. If this is the case may be liable to lead to a traffic accident. Thus, using an infrared sensor wateuna adopted the approach that the warning announcement when a pedestrian enters the driveway, curved pedestrian crossing the intersection in this case, it is difficult to install. In this paper, we propose a Fitness referral system utilizes a built-in sensor of the Android mobile devices. For this purpose, the sensor is a proximity sensor using an acceleration sensor. The proximity sensor has a number of disadvantages compared to the high precision battery power, the acceleration sensor accuracy, fast response time, on the other hand, the disadvantage is the lower. Close to reduce battery consumption of the sensor, BMI of the user sensor control mechanism and increase the accuracy of the acceleration sensor (Body Mass Index) obtained after the index was applied to the recommendation algorithm, which like the movement mechanism.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.417-420
• /
• 2013

Teaching and learning through games which arouses interest in learning not only lessens a burden of a learner but also labors for Academic Achievement. and for the sake of enhancing convergence of thinking and problem solving abilities as well as raising interest and understanding in science and technology, Steam teaching which is mainly made of research and experimental activities is emphasized on. This paper which makes use of crayon physics has developed Steam program it was mainly applied to science for the first year of junior high school [strength and motion] which for learners of each team is made of four steps eight time in total. At each step learners can understand principle of strength and motion, especially at the step of finding principle of science through games can personally solve the game in cooperation with the leaners of a team and find principle of strength and motion which is to be applied to solving the game. By personally designing and making new games learners can enhance the ability of convergence of thinking. It is expected that the program developed in this paper can enhance imaginativeness of thinking and interest in science which lead to affirmative changes.

• Information Systems Review
• /
• v.13 no.1
• /
• pp.61-74
• /
• 2011

Software industry still has many deep-seated problems. As a natural consequence, it may have to learn from best practices in more mature industry like manufacturing. An example is 'lean' software development which is defined as translation of 'lean manufacturing' principles to the software development domain. The principles include 'eliminate waste' and 'amplify learning.' It was much asserted that these principles are worth applying. Not much study, however, was done on how to practically implement these principles into software development practice. In this study we attempt to present a method in which project lead time and software defects are regarded as major targets of management and are visualized using Cumulative Flow Diagram. We further applied this method on actual projects. The result confirms that agile is positively effective on reducing wastes.