• Journal of Information Processing Systems
• /
• 제2권1호
• /
• pp.39-43
• /
• 2006

In this paper, we proposed TASL-MAC, a medium-access control (MAC) protocol for wireless sensor networks. In wireless sensor networks, sensor nodes are usually deployed in a special environment, are assigned with long-term work, and are supported by a limited battery. As such, reducing the energy consumption becomes the primary concern with regard to wireless sensor networks. At the same time, reducing the latency in multi-hop data transmission is also very important. In the existing research, sensor nodes are expected to be switched to the sleep mode in order to reduce energy consumption. However, the existing proposals tended to assign the sensors with a fixed Sleep/Listening schedule, which causes unnecessary idle listening problems and conspicuous transmission latency due to the diversity of the traffic-load in the network. TASL-MAC is designed to dynamically adjust the duty listening time based on traffic load. This protocol enables the node with a proper data transfer rate to satisfy the application's requirements. Meanwhile, it can lead to much greater power efficiency by prolonging the nodes' sleeping time when the traffic. We evaluate our implementation of TASL-MAC in NS-2. The evaluation result indicates that our proposal could explicitly reduce packet delivery latency, and that it could also significantly prolong the lifetime of the entire network when traffic is low.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권11호
• /
• pp.2143-2159
• /
• 2011

The hybrid architecture of content delivery networks (CDN) and peer-to-peer overlay networks (P2P) is a promising technology enables effective real-time streaming services. It complements the advantages of quality control and reliability in a CDN, and the scalability of a P2P system. With real-time streaming services, however, high connection setup and media delivery latency are becoming the critical issues in deploying the CDN-P2P system. These issues result from biased peer selection without location awareness or content awareness, and can lead to significant service disruption. To reduce service disruption latency, we propose a group-based CDN-P2P hybrid architecture (iCDN-P2P) with a location/content-aware selection of peers. Specifically, a SuperPeer network makes a location-aware peer selection by employing a content addressable network (CAN) to distribute channel information. It also manages peers with content awareness, forming a group of peers with the same channel as the sub-overlay. Through a performance evaluation, we show that the proposed architecture outperforms the original CDN-P2P hybrid architecture in terms of connection setup delay and media delivery time.

• 한국통신학회논문지
• /
• 제30권4A호
• /
• pp.304-311
• /
• 2005

무선 PKI에서 OCSP기법은 인증서 폐지·효력 정지 상태 파악을 실시간으로 정확하게 할 수 있는 특성이 있다. 그러나 많은 클라이언트들이 OCSP서버에 인증에 대한 서비스를 요청할 경우 OCSP서버의 부하는 증가하게 되고, 많은 갱신 정보들이 집중화될 때도 OCSP서버는 많은 부하를 갖게 된다. 이에 분산 OCSP서버 기법을 무선PKI에 적용함으로서 빠른 인증서 검증과 OCSP서버로의 트래픽 집중을 막고, 중앙 집중적인 구조의 많은 제약들을 분산된 OCSP서버로 해결하고자 한다. 시뮬레이션 실험 결과 분산 OCSP를 사용한 경우, OCSP 서버의 수가 늘어날 수록 서버의 부하감소와 인증서 검증 요청 평균 응답시간이 단축됨을 확인할 수 있었다. 또한 복수의 OCSP 서버를 제공하여 자원의 분산화가 가능하며 부수적인 효과로 장애에 대한 대비로 이중화 효과를 얻을 수 있었다.

• ETRI Journal
• /
• 제40권1호
• /
• pp.111-121
• /
• 2018

To find the emerging patterns (EPs) in streaming transaction data, the streaming is first divided into some time windows containing a number of transactions. Itemsets are generated from transactions in each window, and then the emergence of itemsets is evaluated between two windows. In the tilted-time windows model (TTWM), it is assumed that people need support data with finer accuracy from the most recent windows, while accepting coarser accuracy from older windows. Therefore, a limited array's elements are used to maintain all support data in a way that condenses old windows by merging them inside one element. The capacity of elements that accommodates the windows inside is modeled using a particular number sequence. However, in a stream, as new data arrives, the current array updating mechanisms lead to many null elements in the array and cause data incompleteness and inaccuracy problems. Two models derived from TTWM, logarithmic TTWM and Fibonacci windows model, also inherit the same problems. This article proposes a novel push-front Fibonacci windows model as a solution, and experiments are conducted to demonstrate its superiority in finding more EPs compared to other models.

• 산업경영시스템학회지
• /
• 제35권2호
• /
• pp.138-146
• /
• 2012

This paper studies the effect of information quality level and customer demand on performance measures in a supply chain. The information quality level compares 2 types, the information levels of a customer demand and a lead time. The customer demand process follows a general auto-correlated AR(1) process without seasonality. In the AR(1) process, ${\sigma}$ indicates the degree of demand fluctuation and ${\rho}$ means the trend of customer demand. ANOVA tests using a 5% significance level are performed in SPSS to examine significant performance changes among various cases.

• 대한안전경영과학회지
• /
• 제5권2호
• /
• pp.155-164
• /
• 2003

In this regard, the newly focused logistics information system makes reducing the expenses of whole logistic available by cutting down the expenses of materials, transportation and stock and also, it allows the company to cut down the procurement expense through the reduced lead-time and rationalize producing plans by eliminating the uncertain orders and fluctuation in procurement. It further more optimizes the efficiency of over all productions by meeting the dead line for delivery to the customers. In the recent environment of globalization where fierce competitions exist between manufacturers, logistics plays important role in the strategies of companies, and managements of companies try their best efforts in establishing the strategy to accomplish the innovative relationship between supply chain channels. Therefore, in this study, we try to suggest the model of consolidated logistics system that is integrated logistics information system with suggesting the better way of logistics and comparative analysis with logistics system to resolve the difficulties numbers of companies face after realizing what logistics information system is in Korea.

• 산경연구논집
• /
• 제9권9호
• /
• pp.35-44
• /
• 2018

Purpose - In endless competition, companies pursue cost reduction and work efficiency. So, entrepreneurs try to increase job intensity, which may lead to job stress and high turnovers because of job burnout. But, Information systems are acknowledged as a work support tool that secures work convenience and the productivity of employees. In this study, we aimed to confirm the effects of information systems in reduing the work overload of employees in a human resource intensive industry. Research design, data and methodology - This is based on the job demands-resources model, conducting an empirical analysis of surveys given to hospital employees working in a human resource intensive industry. Results - The research revealed that information systems reduced the work overload of employees in a human resource intensive industry. Conclusion - This study confirmed the effects of information systems as a job resource based on JD-R theory, and presentation of empirical results indicated that information systems alleviate employee job overload and increases job satisfaction in the medical services industry. In the medical services industry, using electronic health record system decreases in work overload, which results in employees gaining time for self-development and time management, reducing job stress, and leading to job satisfaction.

• Journal of information and communication convergence engineering
• /
• 제8권5호
• /
• pp.473-478
• /
• 2010

Today's engineering design is carried out in a distributed fashion geographically or physically. This places new requirements on the computational environments such as efficient integration and collaboration. With the advances of the Internet and Network environment recently, many researches have been proposed and at the same time, Web-based distributed design gives to a new paradigm in design and manufacturing fields. That is, Web-based technologies lead to reduce the product development times and to ensure a competitive product in order to exchange and interact of real-time design information that integrates the distributed design environment between departments as well as companies via Internet and Web. So, an efficient data communication for design information sharing is the foundation for collaborative systems in the distributed environment. Design data communication techniques such as CORBA, DCOM and RMI have been considered in the existing research but they have some problems that are limitations of interoperability and firewall problems in the Web. Therefore, this paper presents a Web-based distributed design application where distributed design information resources are integrated and exchanged using Web Services for supporting XML and HTTP without the interoperability and firewall problems through the 330K VLCC case.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 추계학술대회
• /
• pp.287-289
• /
• 2021

스마트농업 교육은 자기주도형 학습으로 제공되어 공간,장소,시간에 제약을 받지 않으며 서비스 사용자의 현재 상태를 감시하여 서비스 제공에 반영시킬 수 있도록 상황인지 기능을 가진다. 본 논문에서는 스마트농업 교육서비스의 개념과 교육 서비스를 위한 요구사항 그리고 참조구조의 교육 표준 모델을 분석한다. 또한 스마트 농업 교육 서비스의 확산을 위해 필수적으로 요구되는 네트워크 기반에서의 교육 서비스의 모델을 제시하여 스마트 농업 국내외 표준화 및 농업정보의 확산에 기여하리라 판단된다.

• 한국산업보건학회지
• /
• 제20권1호
• /
• pp.10-18
• /
• 2010

To provide necessary information for future environmental monitoring of smelting and litharge making industries in Korea, environmental monitoring dataset of air lead concentration of 4 lead industries(1 primary smelting, 2 secondary smelting and 1 litharge making industry) were analyzed from 1994 to 2007. Data were compared using geometric mean and standard deviation with minimum and maximum values according to year of measurement, type of lead industries and type of operation of lead industries. The geometric mean and standard deviation of air concentration for a total of 1140 samples in all lead industries for overall 14 years were 70.7${\mu}g/m^3$ and 5.51 with minimum of 1${\mu}g/m^3$ and maximum of 9,185 ${\mu}g/m^3$. The overall geometric means of air concentration were above the permissible exposure levels(PEL) until year of 2001 and thereafter they were remained at the level of half of PEL. The geometric means of primary smelting, secondary smelting and litharge making industry for overall 14 years were 21.7${\mu}g/m^3$(number of samples: 353), 82.5${\mu}g/m^3$(number of samples: 357) and 164.2 ${\mu}g/m^3$(number of samples: 430) respectively. In primary smelting industry, the highest geometric mean air concentration was 35.4 ${\mu}g/m^3$ in the secondary smelting operation; followed by casting operation (24.9 ${\mu}g/m^3$) and melting operation (14.9 ${\mu}g/m^3$), respectively. On the other hand, in secondary smelting industries, the highest geometric mean air concentration was 125.4${\mu}g/m^3$ in melting operation; followed by casting operation (90.5${\mu}g/m^3$) and pre-treatment operation (43.4${\mu}g/m^3$), respectively. However, in litharge making industries, there were no significant differences of geometric mean air concentrations between litharge operation and stabilizer operation. The proportion of over PEL (50${\mu}g/m^3$) was highest in litharge industry and followed by secondary smelting industries. However The proportions of over PEL(${\mu}g./m^3.$) were decreased by the years of environmental monitoring. The significant reduction of mean air lead concentration since year of 2000 was observed due to more active environmental engineering control and new introduction of new operation in manufacturing process, but may be also influenced by non-engineering method such as reduction of operation hours or reduction of exposure time during actual environmental measurement by industrial hygienist according to more strict enforcement of occupational and safety law by the government.