• Journal of electromagnetic engineering and science
• /
• 제16권1호
• /
• pp.7-12
• /
• 2016

This paper presents the design of a negative group delay circuit (NGDC) using the filter synthesis approach. The proposed design method is based on a frequency transformation from a low-pass filter (LPF) to a bandstop filter (BSF). The predefined negative group delay (NGD) can be obtained by inserting resistors into resonators. To implement a circuit with a distributed transmission line, a circuit conversion technique is employed. Both theoretical and experimental results are provided for validating of the proposed approach. For NGD bandwidth and magnitude flatness enhancements, two second-order NGDCs with slightly different center frequencies are cascaded. In the experiment, group delay of $5.9{\pm}0.5ns$ and insertion loss of $39.95{\pm}0.5dB$ are obtained in the frequency range of 1.935-2.001 GHz.

• Journal of Communications and Networks
• /
• 제15권4호
• /
• pp.430-438
• /
• 2013

This paper addresses the issue of throughput-delay of one-to-many wireless multi-hop flows based on random linear network coding (RLNC). Existing research results have been focusing on the single-hop model which is not suitable for wireless multi-hop networks. In addition, the conditions of related system model are too idealistic. To address these limitations, we herein investigate the performance of a wireless multi-hop network, focusing on the one-to-many flows. Firstly, a system model with multi-hop delay was constructed; secondly, the transmission schemes of system model were gradually improved in terms of practical conditions such as limited queue length and asynchronous forwarding way; thirdly, the mean delay and the mean throughput were quantified in terms of coding window size K and number of destination nodes N for the wireless multi-hop transmission. Our findings show a clear relationship between the multi-hop transmission performance and the network coding parameters. This study results will contribute significantly to the evaluation and the optimization of network coding method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권10호
• /
• pp.4977-4996
• /
• 2016

The existence of excessively large and too filled network buffers, known as bufferbloat, has recently gained attention as a major performance problem for delay-sensitive applications. Researchers have made three types of suggestions to solve the bufferbloat problem. One is End to End (E2E) congestion control, second is deployment of Active Queue Management (AQM) techniques and third is the combination of above two. However, these solutions either seem impractical or could not obtain good bandwidth utilization. In this paper, we propose a Transmission Control Protocol（TCP）delayed window update mechanism which uses a congestion detection approach to predict the congestion level of networks. When detecting the network congestion is coming, a delayed window update control strategy is adopted to maintain good protocol performance. If the network is non-congested, the mechanism stops work and congestion window is updated based on the original protocol. The simulation experiments are conducted on both high bandwidth and long delay scenario and low bandwidth and short delay scenario. Experiment results show that TCP delayed window update mechanism can effectively improve the performance of the original protocol, decreasing packet losses and queuing delay while guaranteeing transmission efficiency of the whole network. In addition, it can perform good fairness and TCP friendliness.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.336-341
• /
• 2004

In this paper, a hybrid stabilization approach involving both passivity observer/passivity controller and wave variables is addressed to stabilize a teleoperation system with fixed time delay. To guarantee the stability of master or slave side, passivity observer/passivity controller are applied. But, passivity observer/passivity controller cannot deal with communication delay, and thus even small communication delay cause the system to be unstable. To cope with this problem, wave variables are additionally employed to have robustness to fixed communication delays. To show the validity of our proposed approach, several computer simulation results are illustrated.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.723-726
• /
• 1998

Fault dropping is a very important part of test generation process. It is used to reduce test generation time. Test generation systems use fault simulation for the purpose of fault dropping by identifying detectable faults with generated test patterns. Two kinds of delay fault model is used in practice, path delay fault model and gate delay fault model. In this paper we propose an efficient method for gate delay test generation which shares second test vector.

• 전자공학회논문지A
• /
• 제29A권2호
• /
• pp.33-40
• /
• 1992

The design method of signal delay line system using indirect frequency synthesizer is presented. The variable signal delay line system with 2[nsec] step of delay time at center frequency 60[MHz], bandwidth 500[KHz] and range 5.24-5.81[x10S0-6Tsec] is designed and fabricated. The results were met with good characteristics to be variable delay time of average 2.01[nsec] per step.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.1201-1204
• /
• 2003

This paper described a replica-delay adaptive lock-acquisition scheme for high-speed DLLs. The proposed scheme provides the fast and correct locking cycle that is variable according to the magnitude of the arbitrary replica delay (fixed delay). The scheme guarantees the wide operation range and the fast lock-aquisition time. It has been confirmed by HSPICE simulations in a 0.35${\mu}{\textrm}{m}$ CMOS process.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권3호
• /
• pp.193-196
• /
• 2001

For wide locking range, an analog delay locked loop (DLL) was designed with the selective phase inversion scheme and the variable number of delay elements. The number of delay elements was determined adaptively depending on the clock cycle time. During the analog fine locking stage, a self-initializing 3-state phase detector was used to avoid the initial state problem associated with the conventional 3-state phase detector. With these schemes, the locking range of analog DLL was increased by four times compared to the conventional scheme according to the simulation results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.172-175
• /
• 2003

In this paper we propose a method fur the evaluation of the quality of service for VoIP services in NGN. Specifically, let us anatomize the elements of delay of a voice connection in the network in an end-to-end manner and investigate expected value at each point. We extract the delay time in each element in the network such as gateway, network node, and terminal equipment, and estimate an upper bound fur the tolerable delay in each element.

• 한국수자원학회논문집
• /
• 제30권6호
• /
• pp.641-648
• /
• 1997

상관계수가 변수간의 선형 상관관계를 나타내듯이 mutual information은 변수간의비선형 상관관계를 나타내준다. 본 논문에서는 mutual information 추정법으로 다변수 핵 미도함수(multivariate kernel density estimator)를 이용한 방법이 여러 time lags값에 대하여 산정 되었다. 많은 수문자료에서 보여지는 비선형 관계를 Mutual Information으로 확인하여 보았고, 또한 Mutual Information값이 거의 0인 점에서 optimal delay time을 구하여, 하나의 자료로부터 다변수 회귀분석 모델을 만들 때 이용할 수 있다.