• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.602-611
• /
• 2013

We have investigated the influence of system composition and preparation conditions on the particle size of vitamin E acetate (VE)-loaded nanoemulsions prepared by PIC(phase inversion composition) emulsification. This method relies on the formation of very fine oil droplets when water is added to oil/surfactant mixture. The oil-to-emulsion ratio content was kept constant (5 wt.%) while the surfactant-to-oil ratio (%SOR) was varied from 50 to 200 %. Oil phase composition (vitamin E to medium chain ester ratio, %VOR) had an effect on particle size, with the smallest droplets being formed below 60 % of VOR. Food-grade non-ionic surfactants (Tween 80 and Span 80) were used as an emulsifier. The effect of f on the droplet size distribution has been studied. In our system, the droplet volume fraction, given by the oil volume fraction plus the surfactant volume fraction, was varied from 0.1 to 0.3. The droplet diameter remains less than 350 nm when O/S is fixed at 1:1. The droplet size increases gradually as the increasing the volume fraction. Particle size could also be reduced by increasing the temperature when water was added to oil/surfactant mixture. By optimizing system composition and homogenization conditions we were able to form VE-loaded nanoemulsions with small mean droplet diameters (d < 50 nm). The PIC emulsification method therefore has great potential for forming nanoemulsion-based delivery systems for food, personal care, and pharmaceutical applications.

• Environmental Engineering Research
• /
• v.23 no.3
• /
• pp.242-249
• /
• 2018

The use of palm oil and diesel blended with ethanol, known as a microemulsion biofuel, is gaining attention as an attractive renewable fuel for engines that may serve as a replacement for fossil-based fuels. The microemulsion biofuels can be formulated from the mixture of palm oil and diesel as the oil phase; ethanol as the polar phase; methyl oleate as the surfactant; alkanols as the cosurfactants. This study investigates the influence of the three cosurfactants on fuel consumption and exhaust gas emissions in a direct-injection (DI) diesel engine. The microemulsion biofuels along with neat diesel fuel, palm oil-diesel blends, and biodiesel-diesel blends were tested in a DI diesel engine at two engine loads without engine modification. The formulated microemulsion biofuels increased fuel consumption and gradually reduced the nitrogen oxides ($NO_x$) emissions and exhaust gas temperature; however, there was no significant difference in their carbon monoxide (CO) emissions when compared to those of diesel. Varying the carbon chain length of the cosurfactant demonstrated that the octanol-microemulsion fuel emitted lower CO and $NO_x$ emissions than the butanol- and decanol-microemulsion fuels. Thus, the microemulsion biofuels demonstrated competitive advantages as potential fuels for diesel engines because they reduced exhaust emissions.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.7
• /
• pp.1120-1124
• /
• 2006

Supplementation with rice oil and its major components (oleic acid and linoleic acid) was found to have a significant influence on cephalosporin C (CPC) production and cell growth by A. chrysogenum M35 in shake flask cultures. Five percent (v/v) rice oil had the most robust effect and 5% (v/v) oleic acid was the second most efficient on cell growth, whereas 3% (v/v) linoleic acid was found to be optimal for CPC production. Rice oil, oleic acid, and linoleic acid also significantly improved the rates of glucose consumption. When glucose was almost consumed, CPC production was initiated and, on the addition of rice oil, lipase activity increased steadily to 1.56 U/ml for 4 days. These results suggest that rice oil and fatty acids are used as carbon source to produce CPC by A. chrysogenum M35. Moreover, a mixture, composed of 40% (v/v) oleic acid and 60% (v/v) linoleic acid, had the strongest stimulatory effect on CPC production, due to a synergistic effect of the two fatty acids. Consequently, the maximum CPC titer (7.44 g/l) was improved about 4.5-fold.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.4
• /
• pp.706-715
• /
• 2014

The purpose of this study was to determine the optimal mixing ratio of Alaska Pollack (Theragra chalcogramma) and olive oil in the preparation of sausage. The experiment was designed according to the central composite design for estimating the response surface, which demonstrated 10 experimental points including 2 replicates for Alaska Pollack and olive oil. The physical, mechanical and sensory properties of test materials were measured. A canonical form and perturbation plot showed the influence of each ingredient on the final product mixture. Measurement results of the physical and mechanical properties showed a significant increase or decrease in the following properties: dough sweetness (p<0.05); sausage L (p<0.05), a (p<0.001), and b (p<0.01); hardness (p<0.01), chewiness (p<0.05), and gumminess (p<0.01). Also, the sensory measurements showed a significant improvement in color (p<0.05), flavor (p<0.01), taste (p<0.001), tenderness (p<0.05), chewiness (p<0.01), mositness (p<0.05), and overall quality (p<0.01). As a result, the optimum formulation by numerical and graphical methods was calculated as Alaska Pollack 35.74 g and olive oil 7 g.

• Journal of Energy Engineering
• /
• v.3 no.2
• /
• pp.130-150
• /
• 1994

Coal-water mixture(CWM) fuel has attracted much attention as a substitute fuel for oil by which high economics and short-term commercialization might be realized in comparison with other coal conversion technologies. There are many factors that affect the CWM combustibility, such as the physical properties of CWM, the performance of atomizer and burner, operating conditions, capacity and load of the boiler, etc. Particularly, atomization quality is extremely critical to achieving acceptable carbon conversion efficiency of CWM fuel and maintaining the flame stability, because the coal particles in the CWM droplets burn as agglomerates. This paper presents the R&D results about the CWM atomization characteristics, including the significance of CWM atomization the R&D results about the CWM atomization characteristics, including the significance of CWM atomization quality, the atomization and combustion mechanism, the type of CWM atomizer, size and size distribution of CWM droplets and some factors that influence the atomization performance.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.7
• /
• pp.49-54
• /
• 2011

Now the world will regulate the CO2 emission due to environmental issues. For an alternative plan photovoltaic system is watched. So, photovoltaic system is trend of big city and it is mandatory for renovation of construction. Oil & gas filling station existed in city is suitable to found the photovoltaic system. But the general photovoltaic system in oil & gas filling station is difficult to found because it is classified into hazardous area. This paper evaluates intrinsic safety evaluation of solar cell for making basic data to found for the photovoltaic system on hazardous area. The intrinsic safety characteristic is evaluated by short-circuit ignition test using IEC type spark ignition test apparatus and temperature rising test. The result of short-circuit ignition test, propane-air mixture gas is exploded on condition that 4 solar cells(9[V], 90[mA]) are connected serially under insolation 800[W/$m^2$]. So, if a larger solar module will be used at oil & gas filling station than we were tested, it needs explosion proof. As the result of rising temperature test, the temperature rising due to short circuit is not so much, but when the temperature rises due to radiant heat, it demands careful consideration for environmental influence.

• KSBB Journal
• /
• v.26 no.4
• /
• pp.333-340
• /
• 2011

In this study, gemcitabine-loaded methoxy poly(ethylene glycol)-b-poly(L-lactide) (MPEG-PLLA) microparticles with different PEG block lengths were prepared by a W/O/W double emulsion technique. The present study focuses on the investigation of the influence of various preparative parameters such as the ratio of internal water phase and oil phase, polymer concentration, solvent composition of organic phase and salt concentration of external water phase on the morphology and encapsulation efficiency of the microparticles. The microparticles fabricated at high volume ratios of internal water phase to oil phase and at high polymer concentrations showed a relatively high encapsulation efficiency and low porosity. When a dichloromethane/ethyl acetate mixture was used as solvent, both the encapsulation efficiency and drug loading of the microparticles decreased as the level of ethyl acetate increased. The addition of a salt (NaCl) to the external water phase significantly improved the encapsulation efficiency up to 40%, and the microparticles became more spherical with their size and porosity decreased.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.3 no.4
• /
• pp.297-305
• /
• 1991

Recently, automotive air conditioning system manufacturers have been made a great efforts on the system compactness and high efficiency. This growing interest comes improvements in evaporator thermal performance, one of the most important factors affecting the performance of air conditioning system. In order to improve design of compact type evaporator, this study executes performs to develop a computer program for evaporator thermal performance prediction of automotive air conditioning system. The brief summaries of this study are as follows: 1) To predict the overall thermal performance of serpentine type evaporator, the new simulating method is developed. 2) The calculations are performed as functions of oil mass concentration and refrigerant two-phase distribution at inlet manifold of evaporator. 3) The validity of this simulating program is confirmed by comparing the predicted thermal performance results to experimental results of practical available evaporator. 4) Based on these results, suggestions are made to improve the thermal performance of evaporator.

• Animal Bioscience
• /
• v.35 no.5
• /
• pp.740-751
• /
• 2022

Objective: The study aimed to evaluate the effects of a mixture of encapsulated essential oils (EOs) addition on nutrient digestion, serum biochemical parameters, peripheral blood alpha-naphthyl acetate esterase (ANAE), and acid phosphatase (ACP-ase) positive lymphocyte ratios and intestinal morphology in laying hens. Methods: A total of 320 laying hens of 48-wk-old were randomly allotted into 4 treatment groups with 10 replicates of 8 birds in each replicate. The birds were fed a basal diet (control) or the diet added with mixture of EOs (which consist of eugenol, nerolidol, piperine, thymol, linalool, and geraniol) at 50, 100, and 200 mg/kg for period of 84 days. Results: The addition of EOs at 100 or 200 mg/kg increased the dry matter, organic matter, and crude protein digestion as compared to control. The addition of all doses of EOs did not affect serum gamma glutamyl transferase, alanine aminotransferase, and P but increased serum asparate aminotransferase (AST) concentration. The addition of 200 mg/kg EOs increased serum creatinine, while 100 mg/kg decreased Ca concentration. The addition of 100 and 200 mg/kg EOs generally improved ANAE and ACP-ase positive peripheral blood lymphocyte ratios and intestinal morphology. Conclusion: It can be concluded that, the addition of 100 or 200 mg/kg encapsulated EOs generally increased apparent nutrient digestion and serum AST concentration, improved ANAE and ACP-ase positive peripheral blood lymphocytes and intestinal morphology in laying hens.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.8
• /
• pp.1116-1122
• /
• 2015

This study aimed to investigate the effect of sunflower seeds, either as whole or as oil, on rumen fermentation, milk production, milk composition and fatty acids profile in dairy goats. Fifteen lactating Damascus goats were divided randomly into three groups (n = 5) fed a basal diet of concentrate feed mixture and fresh Trifolium alexandrinum at 50:50 on dry matter basis (Control) in addition to 50 g/head/d sunflower seeds whole (SS) or 20 mL/head/d sunflower seeds oil (SO) in a complete randomized design. Milk was sampled every two weeks during 90 days of experimental period for chemical analysis and rumen was sampled at 30, 60, and 90 days of the experiment for ruminal pH, volatile fatty acids (tVFA), and ammonia-N determination. Addition of SO decreased (p = 0.017) ruminal pH, whereas SO and SS increased tVFA (p<0.001) and acetate (p = 0.034) concentrations. Serum glucose increased (p = 0.013) in SO and SS goats vs Control. The SO and SS treated goats had improved milk yield (p = 0.007) and milk fat content (p = 0.002). Moreover, SO increased milk lactose content (p = 0.048) and feed efficiency (p = 0.046) compared to Control. Both of SS and SO increased (p<0.05) milk unsaturated fatty acids content specially conjugated linolenic acid (CLA) vs Control. Addition of SS and SO increased (p = 0. 021) C18:3N3 fatty acid compared to Control diet. Data suggested that addition of either SS or SO to lactating goats ration had beneficial effects on milk yield and milk composition with enhancing milk content of healthy fatty acids (CLA and omega 3), without detrimental effects on animal performance.