• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.925-930
• /
• 2006

During the excavation of a tunnel portal, failure zones around the tunnel heading occur and also the ground supports itself. In a portal, its location and the ground characteristic have a great influence on the stability of the tunnel. Therefore, the failure mechanism of a tunnel heading and how to assess the stability of the tunnel are very important. In this paper, the numerical analyses were executed to evaluate the safety factor using strength reduction technique. The influence area of an excavation was also predicted through a case study in which no-support case and support case with the Pattern P-6 were compared in terms of the ground class and the shear strain.

• Journal of Microbiology and Biotechnology
• /
• 제23권10호
• /
• pp.1347-1356
• /
• 2013

Tricholoma matsutake, an ectomycorrhiza that has mutual relationships with the rootlet of Pinus denisflora, forms a fruiting body that serves as a valuable food in Asia. However, the artificial culture of this fungus has not been successful. Soil fungi, including T. matsutake, coexist with many other microorganisms and plants; therefore, complex microbial communities have an influence on the fruiting body formation of T. matsutake. Here, we report on the structures of fungal communities associated with the fairy ring of T. matsutake through the pyrosequencing method. Soil samples were collected inside the fairy ring zone, in the fairy ring zone, and outside the fairy ring zone. A total of 37,125 sequencing reads were obtained and 728 to 1,962 operational taxonomic units (OTUs) were observed in the sampling zones. The fairy ring zone had the lowest OTUs and the lowest fungal diversity of all sampling zones. The number of OTUs and fungal taxa inside and outside the fairy ring zone was, respectively, about 2 times and 1.5 times higher than the fairy ring. Taxonomic analysis showed that each sampling zone has different fungal communities. In particular, out of 209 genera total, 6 genera in the fairy ring zone, such as Hemimycena, were uniquely present and 31 genera, such as Mycena, Boletopsis, and Repetophragma, were specifically absent. The results of metagenomic analysis based on the pyrosequencing indicate a decrease of fungal communities in the fairy ring zone and changes of fungal communities depending on the fairy ring growth of T. matsutake.

• 한국물환경학회지
• /
• 제36권1호
• /
• pp.36-47
• /
• 2020

Three large scale weirs were constructed 2010 - 2011 in the Namhan river, Korea. The purpose of this study was to investigate the spatial distribution of benthic macroinvertebrates and the influence of environmental factors at the weirs 2014 - 2015. The number of species was higher in the riparian zone than in the transition or the limnetic zone. This seems to be because of the diversification of microhabitats and food sources according to the development of littoral zones. From the riparian zone to the limnetic zone, the individual abundance proportion of gathering collectors among functional feeding groups decreased, and that of filtering collectors increased. In the limnetic zone, sprawlers and climbers among habitat orientation groups decreased, and burrowers increased. This means that coarse particulate organic matter originated from land or riparian zone was transformed to fine particulate organic matter in the limnetic zone. Asian clam (Corbicula fluminea) and chironomids were dominant species based on individual abundance. Asian clam, a major taxon considering biomass, was abundant toward the limnetic zone. This is becasue of the shallow depth, suitable water current, slightly coarse substrate, and good water quality. There was no significant relationship between the water quality and the characteristics of the benthic macroinvertebrate community because the water quality was spatially not heterogenous. The more influential factors for benthic community were physical factors, especially water depth. Water depth showed a markedly significant correlation with Shannon-Weaver's species diversity (r=-0.90), Margalef's species richness (r=-0.82), and McNaughton's dominance (r=0.86). Water depth showed a positive correlation (r=0.68) with the Kong and Kim BMSI (Bentic Macroinverebrates Streambed Index), and this may be related to the coarse substrate of the limnetic zone.

• 한국시뮬레이션학회논문지
• /
• 제20권2호
• /
• pp.67-76
• /
• 2011

자동차 보수용 부품 창고 운영에서 오더 피킹 작업은 대부분 노동력에 의존하는 작업이다. 자동차 보수용 부품 창고는 수십만 품목을 저정하고 있는데, 일반적으로 파레토의 80대 20의 법칙과 같이 저장된 품목의 20%가 80%의 물동량을 일으키고 있다. 이를 효율적으로 운영하기 위하여 고순환 품목은 불출장 근처에 배치하여 운영 효율을 높이게 되는데, 불출장 근처의 고순환 품목 저장 공간을 Golden Zone이라 한다. 오더 피킹 경로를 효율적으로 결정하는 것은 생산성 및 인건비와 직접적인 연관 관계가 있다. 하지만 많은 기업에서는 단순한 방법론을 적용하고 있는 것이 현실이다. 본 연구에서는 기존의 오더 피킹 휴리스틱 및 경로 최적화 알고리즘을 현실적으로 적용하면 어떤 효과를 얻을 수 있는지 여러 가지 상황에 대한 시뮬레이션 실험을 진행하였다. 특히 Golden Zone 운영이 오더 피킹 작업의 생산성에 미치는 영향을 각 경로 최적화 알고리즘과 같이 비교 분석하였다. 분석 결과 최적화 알고리즘은 가장 단순한 방법론 대비 최소 17.2%의 개선 효과 기대할 수 있으며 Golden Zone 운영은 어떤 경로 최적화 알고리즘을 적용하더라도 효과적임을 확인하였다.

• 대한교통학회지
• /
• 제23권8호
• /
• pp.139-145
• /
• 2005

영향권은 도로시설물 건설 이후에 통행패턴이 현저하게 변화되는 지역을 의미한다. 영향권은 교통수요 예측이나 경제성 분석시 공간적 범위를 결정하는 중요한 기준이 된다. 그러나 현존하는 영향권 설정 방법(O/D를 이용한 방법, 교통량의 변화를 이용하는 방법, 교통량의 변화율을 이용하는 방법)들은 영향권 설정에 대한 일정한 기준이 없어 분석가의 판단에 따라 임의로 영향권이 좌우되는 한계가 있다. 본 논문에서는 현재 사용되고 있는 영향권 설정방법을 분석하고, 통행시간을 이용한 영향권 설정방법을 새로이 제시하였다. 통행시간을 이용한 영향권 설정방법은 죤간 통행시간자료를 바탕으로 사업지역 죤 발생량을 기준으로 95%의 교통량이 통행하는 지역 중 통행시간의 95%에 해당하는 영역까지를 영향권으로 설정하는 방법이다. 또한 이 방법을 통해 영향권 설정에 대한 일정한 기준을 제시하였다.

• 한국안전학회지
• /
• 제5권1호
• /
• pp.31-39
• /
• 1990

In this paper, the influence of the table speed, metal removal rate and grinding fluid on long wheel workpiece contact zone at high effect grinding was investigated by theoretical analyses and measuring the temperature, and discussed by the temperature distribution in grinding surface layer. Main results obtained are as follows, 1) Rega.dless of the table speed, the temperature gap of the workpiece(heat influx) is about 6-8 times as high in dry condition as in wet condition. 2) Good grinding condition can be obtained owing to the effect of grinding fluid without any burning defect under the condition of the metal removal rate(1.0mm$^3$/mm.s) in case of wet grinding. 3) When the depth from the surface layer is about 1.25-1.5mm under the condition of the slow table speed, surface temperature goes up higher as the table speed slows down, because long contact time is laked at the surface layer. 4) In case of the same metal removal rate, the lower the table speed becomes, the higher the surface temperature is, because grinding depth has a far more influence on wheel workpiece contact zone than the table speed.

• 한국터널지하공간학회 논문집
• /
• 제4권2호
• /
• pp.113-121
• /
• 2002

석회암 지역에서 불규칙하게 발견되고 있는 공동의 규모와 위치를 표준화하여 터널에 미치는 영향을 수치해석적으로 접근하여 영향권을 설정하였다. 공동의 불규칙한 모서리 부분의 응력집중 문제는 해석의 한계때문에 타원형으로 모델링 되었다. 공동의 위치가 터널의 천단부와 하부 모서리에 있는 경우 가장 큰 영향을 나타났다. 굴착되는 터널크기의 공동이 1D (터널직경)정도 이격되어 있으면 안정성에는 큰 영향이 없는 것으로 나타났다. 터널과 공동의 이격거리가 0.25D (터널직경) 이내의 경우에는 변위 및 지보재에 미치는 영향이 큰 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제10권2호
• /
• pp.175-188
• /
• 2016

The construction of a new cavern modifies the state of stresses and displacements in a zone around the existing cavern. For multiple caverns, the size of this influence zone depends on the ground type, the in situ stress, the cavern span and shape, the width of the pillar separating the caverns, and the excavation sequence. Performances of underground twin caverns can be unsatisfactory as a result of either instability (collapse) or excessive displacements. These two distinct failures should be prevented in design. This study simulated the ultimate and serviceability performances of underground twin rock caverns of various sizes and shapes. The global factor of safety is used as the criterion for determining the ultimate limit state and the calculated maximum displacement around the cavern opening is adopted as the serviceability limit state criterion. Based on the results of a series of numerical simulations, simple regression models were developed for estimating the global factor of safety and the maximum displacement, respectively. It was proposed that a proper pillar width can be determined based on the threshold influence factor value. In addition, design charts with regard to the selection of the pillar width for underground twin rock caverns under similar ground conditions were also developed.

• 한국주거학회논문집
• /
• 제26권1호
• /
• pp.53-60
• /
• 2015

Community is crucial for human beings not only because they are born with communal self but also because social cooperation is more efficient than competition in many cases. Human beings are defined as Homo communicus living in residential community which is important for the fulfillment of their primary needs. Residential community is an 'intimacy zone' where personal and emotional interactions are made. This study aims at examining the health of residential community in Korea by exploring the level of place attachment and neighborhood trust. Previous studies indicate that place attachment and trust are influenced by three dimensions such as residents' characteristics, house types and regional environment. This study conducted a nationwide questionnaire survey and it shows that place attachment moulds neighborhood trust. The results of path analysis demonstrates that place attachment and trust appear high in detached house areas. Age of residents also gives positive influence on the level of place attachment and neighbourhood trust. This result gives significant policy implications for the development of residential community in Korea. Residential community as an intimacy zone has been eroded and desperately needs to be revitalized. For this, more concern should be given to the issue of desirable size of residential community and the types of houses. Detached house area must be supported by governmental policies.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.430-439
• /
• 1990

Steady state turbulent airflow and unsteady characteristics of generation, transportation, and recovery behavior of contaminate particles in the simplified 2 dimensional Vertical Laminar Flow (VLF) type clean room was numerically simulated using the low Reynolds number k-over bar.epsilon- turbulent model. Characteristics of airflow in VLF type clean room are greatly affected by the recirculation zone around working surface. The recirculation zone must be considered at the time of clean room design because the recirculation zone whose area increases with increment of inlet velocity exerts bad influence upon the performance of clean room in terms of particle contamination. The location of maximum particle concentration changes from the location of particle source to the recirculation zone, while averaged particle concentration is reduced exponentially with time. Recovery time of clean room with spontaneous particle generation source is inversely proportional to inlet velocity. We introduce nondimensionalized recovery time through the dimensional analysis, which can indicates the general performance of clean room with design structure change. It was identified that .tau. is independent of inlet velocity and background concentration. Therefore .tau. can be the simple factor to compare the different structure of clean room in terms of dynamic response to contamination and becomes larger with better structure of clean room.