• 한국인쇄학회지
• /
• 제3권1호
• /
• pp.1-10
• /
• 1985

In Graphic art reproduction process it is important to realize that which set of inks and their densities (film thickness) and which set of halftone positive should be aimed at. in order to meet the demand for good color reproduction. There have been various studies to calculation the color reproduction of the graphic arts. however. these study were based on the assumed characteristics of the materials. In this study the relationship between wet-trapping (wet on wet-printing) and increases of ink layer and printing sequence are examined.

• Bulletin of the Korean Chemical Society
• /
• 제23권5호
• /
• pp.727-735
• /
• 2002

Proton coupled carbon-13 relaxation experiment was performed to investigate the effect of vicinal protons on spin-lattice relaxation of methylene carbon-13 in n-undecane. A BIRD type pulse sequence was employed as a way to check the validity of describing the 13CH2 moiety as an isolated AX2 spin system. The results show that the presence of vicinal protons exerts substantial influence on the relaxation of methylene carbon-13, indicating that it is not a very good approximation to treat a methylene moiety as an isolated AX2 spin system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.292-294
• /
• 2006

This paper presents a study on the use of improved space-vector modulation of VSI employing only four switches, four body diodes. Different switching sequence strategy for vector control for inverter fault mode are described. The influence of different switching patterns at same modulation index and improved PWM method is proposed. The proposed PWM is compared with conventional PWM. Simulation and experimental results are presented.

• 자원환경지질
• /
• 제32권4호
• /
• pp.399-409
• /
• 1999

Mullitization of kaolinite and dickite was examined with special attention to the influence of polytypism and impurities on the phase transformation. The phase transformation sequence in dickite is identical with that in kaolinite except that cristobalite is crystallized at $50^{\circ}C$ higher temperature in dickite. Difference in phase transformation above $1000^{\circ}C$ in kaolin minerals is attributed to the different crystal structures of metadickite and metakaolinite on the effect of impurities. A part of quartz is transformaed into cristobalite. Spinel-type phase produced in disordered kaolins including illite occurs over a short range of temperatures. Primary mullite is transformed into orthorhombic mullite at higher temperature as well. These results sustain the idea that disintegration of methkaolin and the spinel-type phase supplies extra sillica and promotes the growth of mullite cristobalite.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.764-767
• /
• 2003

We have experimentally investigated the influence of wall charge configurations prior to addressing discharge on dynamic margin in AC plasma display panel. In this experiment, we have analyzed the quantity and polarity of wall charge accumulated on the front and rear dielectrics just prior to the addressing discharge under the conventional driving sequence.

• 영어어문교육
• /
• 제11권4호
• /
• pp.261-286
• /
• 2005

Lately, teaching methods and instruments have become student-centered and are directed towards developing a communicative competence of learners. However, compared with that of other countries, the level of our students English is not very good. I guess the reason is that our English education is focused on the uniformal teaching methods regardless of the differences of intelligence, affective domains and study time. I tried to find the relationship between these factors and the students' English accomplishments. So I divided the students into 2 groups of superior and inferior students by the standard of intelligence, affective domain and study time and compared the scores between the groups in the fields of reading comprehension, grammar, pronunciation, accent, vocabulary, and listening. These were the results that followed: First, intelligence has a great influence students' English accomplishment in all fields. Second, affective domains such as motivation, anxiety, attitude, confidence, and studying time also have some influence on the students' English accomplishments. Third, the sequence of these factors according to their influence force are as follows: study time, anxiety, intelligence, motivation, attitude, and confidence. So we can conclude that we should teach English according to our students' ability in the field of intelligence and affective domains and should not ignore the individual differences they have.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.169-176
• /
• 2002

Axial crushing behavior of cylindrical shell Is utilized in the braking of the high-velocity impacting object. In this paper, truncated cone shape brake device is introduced. That is, thickness of the shell is increased gradually from the impacting end to the other end. A detailed experimental investigation on the quasi-static axial crushing behavior of truncated cone type brake devices has been performed. Specimens of various shape were tested to check the influence of design parameters such as length, radius, mean thickness, and conical angle of cylinder. Influence of the material properties were also investigated by adopting aluminum, low carbon steel, and stainless steel as constructing materials. By analyzing deformation procedures of the specimens, it is seen that conical angle influence the deformation mode and the sequence of the wrinkles generation. Braking distance and mean braking force of each specimen were predicted based on the crushing load measured from the tests.

• 응용통계연구
• /
• 제22권3호
• /
• pp.515-530
• /
• 2009

Evaporation from surface water bodies is influenced by a number of meteorological parameters. The rate of evaporation is primarily controlled by incoming solar radiation, air and water temperature and wind speed and relative humidity. In the present study, influence of weekly meteorological variables such as air temperature, relative humidity, bright sunshine hours, wind speed, wind velocity, rainfall on rate of evaporation has been examined using 35 years(1971-2005) of meteorological data. Statistical analysis was carried out employing linear regression models. The developed regression models were tested for goodness of fit, multicollinearity along with normality test and constant variance test. These regression models were subsequently validated using the observed and predicted parameter estimates with the meteorological data of the year 2005. Further these models were checked with time order sequence of residual plots to identify the trend of the scatter plot and then new standardized regression models were developed using standardized equations. The highest significant positive correlation was observed between pan evaporation and maximum air temperature. Mean air temperature and wind velocity have highly significant influence on pan evaporation whereas minimum air temperature, relative humidity and wind direction have no such significant influence.

• Geomechanics and Engineering
• /
• 제10권2호
• /
• pp.175-188
• /
• 2016

The construction of a new cavern modifies the state of stresses and displacements in a zone around the existing cavern. For multiple caverns, the size of this influence zone depends on the ground type, the in situ stress, the cavern span and shape, the width of the pillar separating the caverns, and the excavation sequence. Performances of underground twin caverns can be unsatisfactory as a result of either instability (collapse) or excessive displacements. These two distinct failures should be prevented in design. This study simulated the ultimate and serviceability performances of underground twin rock caverns of various sizes and shapes. The global factor of safety is used as the criterion for determining the ultimate limit state and the calculated maximum displacement around the cavern opening is adopted as the serviceability limit state criterion. Based on the results of a series of numerical simulations, simple regression models were developed for estimating the global factor of safety and the maximum displacement, respectively. It was proposed that a proper pillar width can be determined based on the threshold influence factor value. In addition, design charts with regard to the selection of the pillar width for underground twin rock caverns under similar ground conditions were also developed.

• Genomics & Informatics
• /
• 제3권2호
• /
• pp.61-65
• /
• 2005

Comparing 231 genes on chimpanzee chromosome 22 with their orthologous on human chromosome 21, we have found that 15 orthologs have indels within their coding sequences. It was rather surprising that significant number of genes have changed by indel, despite the shorter time since their divergence and led us hypothesize that indels and structural changes may represent one of the major mechanism of proteome evolution in the higher primates. Human T-complex protein 10 like (TCP 10L) is a representative having indel within its coding sequence. Gene structure of human TCP10L compared with chimpanzee TCP10L gene showed 16 base pair difference in genomic DNA. As a result of the indel, frame shift mutation occurs in coding sequence (CDS) and human TCP10L express longer polypeptide of 21 amino acid residues than that of chimpanzee. Our prediction found that the indel may affect to dramatic change of secondary protein structure between human and chimpanzee TCP10L. Especially, the structural changes in the C-terminal region of TCP10L protein may affect on the interacting potential to other proteins rather than DNA binding function of the protein. Through these changes, TCP10L might influence gene expression profiles in liver and testis and subsequently influence the physiological changes required in primate evolution.