• 한국농공학회지
• /
• 제12권2호
• /
• pp.1927-1936
• /
• 1970

This is a study on the influence of percent retaining of No. 10 sieve on soil compaction. Reviewing the test values in part 1 and part 2, a relative equation to predict maximum dry density and optimum moisture content was induced. Results of the study are as follow; 1. Maximum dry density increases according as percent retatining of No. 10 sieve increase untill 40%, but it decreases in more than 50%. 2. Maximum dry density has the greatest value at 25%, also it decreases according to increase or decrease at 25% in percent passing of No. 200 sieve. 3. Grain size distribution that Maximum dry density is largest, is 40% in 4.76mm to 2.0mm, 35% in 2.0mm to 0.074mm, 25% in lese than 0.074mm. 4. Correlation betwesn Maximum dry density and optimum moisture content made a curved line. The deviation between maximum dry density to be predicted from optimum moisture content and test values, is less than about 5%. 5. Range of deviation between optimum moisture content to be predicted from classification area and uniformity coefficient isless than about 20%, which belongs to range of moisture content that is correspondent with 95% of maximum dry density, generally.

• 한국음향학회지
• /
• 제23권3호
• /
• pp.197-205
• /
• 2004

천해에서 측정한 선박 방사소음의 거리-주파수 영역 스펙트로그램에 나타나는 줄무늬 패턴 기울기의 부호 변화 원인에 대한 분석 결과를 수록하였다. 모드 이론에 근거한 수치 모델을 이용하여 해저면 음향 특성을 변화시켜 가며 모의한 줄무늬 패턴과 분산 특성을 분석한 결과는 측정 신호에 나타나는 줄무늬 패턴 기울기의 부호 변화가 해저면의 전단성, 보다 구체적으로는 두께가 약 3±1m 정도일 것으로 예상되는 퇴적층의 하부에 존재하는 기반암의 전단성에서 기인한 특징임을 보여주었다.

• 한국패류학회지
• /
• 제21권1호
• /
• pp.19-24
• /
• 2005

This study was undertaken with the intent to describe the influence of water temperature and food concentration on the filtration rates of the Asiatic clam, Corbicula fluminea. The clams were collected at Lake Geumho near Yeongsan river, during March 2001. Food organism, Scenedesmus sp. (KMCC FC-34), was indoor-cultured in f/2 medium, and was used to measure the filtration rate of the clams. Filtration rate of the clams was measured by indirect method. Cell concentrations of food organisms were determined by direct counting cells using the hemacytometer under the light microscope. The filtration rate of the clams increased with water temperature up to circa $25^{\circ}C$. Above this temperature, the filtration rate decreased rapidly. The minimal filtration rate of the clams was recorded at $5^{\circ}C$. Thermal coefficient, $Q_10$ values at low temperature range were much higher than those at high temperature range. These results indicate the asiatic clam is more sensitive in cold water like most of marine bivalves. There was a strong reversed correlation between filtration rate and food concentration. Filtration rate of the clams was reduced as food concentration was increased.

• 한국전기전자재료학회논문지
• /
• 제23권4호
• /
• pp.280-286
• /
• 2010

We have investigated the influence of rapid thermal annealing (RTA) temperature on properties of Al-doped zinc oxide (AZO) thin films deposited on glass substrate by using radio-frequency magnetron sputtering. The RTA is performed in a nitrogen ambient in the temperature range from 300 to $600^{\circ}C$ for 1 minute in a rapid thermal annealer after growing the AZO thin films. The crystallographic structure and the surface morphology of AZO thin film are measured by using X-ray diffraction, and atomic force microscopy and scanning electron microscopy, respectively. The optical transmittance of the deposited thin films is examined in the wavelength range of 300-1100 nm, where the average transmittance is above the 90% in the visible and near-infrared regions. The optical bandgap is calculated from the Tauc's model, and it shows a significant dependence on the RTA temperature. As for the electrical properties of the thin films, the AZO thin film annealed at $400^{\circ}C$ shows the lowest electrical resistivity of $8.6{\times}10^{-3}{\Omega}cm$ and the Hall mobility of $11.3cm^2$/V-sec. These results suggest that the RTA temperature is an important parameter to influence on the structural, electrical, and optical properties of AZO thin films.

• 지식경영연구
• /
• 제13권2호
• /
• pp.73-93
• /
• 2012

Although a wide range of theoretical researches have emphasized on the importance of knowledge management in cooperative R&D network, the empirical researches to synthetically examine the role of organizational learning and open innovation which influence on the performance of technological innovation are not enough to meet academic and practical demands. This study is to investigate the effect of open innovation and organizational learning in venture business on technological competitive advantage and establish the mediating role of organizational learning. For the purpose, the questionnaires, made based on the reviewing previous researches, were collected from 274 Korean venture businesses whose managerial focus is on developing technological innovation. As a result of analysis, the relational dimensions of open innovation - network, intensity and trust shared by a firm with external R&D partners - as well as the internal organizational learning system and competence have positive influence on building technological competitive advantage whose sub-variables are technological excellence, market growth potential and business feasibility. In addition, it is identified that organizational learning has the mediating and moderating effect in the relationship between open innovation and technological competitive advantage. These results imply that open innovation complements and expend the range of limited resources and the scope of innovation in technology-intensive small and medium-sized enterprises. Besides, organizational learning activity reinforces the use of knowledge and resources, obtained from external R&D partners. On the basis of these results, detailed issues and discussion were made in the conclusion.

• 한국대기환경학회지
• /
• 제9권4호
• /
• pp.329-339
• /
• 1993

Due to the global-convection currents, transboundary transport of air pollutants is widely observed in many regions of the world. This study was carried out to investigate the pattern of long-range transport of air pollutants in North East Asia, especially the impact of air pollutants originated in China and Japan on the air quality in Korea. From the meteorological data at the 850 mb surface from May 1986 through April 1987 at 54 obsevation stations in the North East Asia region, the backward and forward trajectories were calculated using interpolation method. And the contributions of pollution sources in neighbor countries to the air quality in Korea were analyzed. It was concluded that air pollution in China had a great influence on the air quality in Korea throughout the year : it could be transported to Korea just within 2 or 3 days most of the time. The trajectory analysis showed that pollution sources in Beijing. Liaoning Province, and Shandong Province, the most heavily industrialized areas in China., were the most influential for the air quality in Korea except for summer season. Durnig summer season, the air pollution in Shanhai and Japan could have moer influence on Korea. Such transboundary transport of air pollutants necessitate international cowork and cooperation in the region of North East Asia.

• 한국자기학회지
• /
• 제6권5호
• /
• pp.334-339
• /
• 1996

도포형 자기기록매체에 있어서 자성분의 size와 특성이 자기기록 특성에 미치는 영향을 조사하기위하여 size가 다른 각각의 자성분으로 만든 도료를 이용하여 자기 tape를 제조하고 자성분의 분산성 및 전자 변환 특성을 측정하였다. 자성분의 분산성은 입자 size의 영향보다 입자의 형태 및 자성분의 표면화학특성에 크게 의존하며 자성분의 입자 size가 작아질 수록 자성분의 충진성은 향상 되고 tape의 remanence 특성과 출력 특성 및 noise 특성이 향상되어 고출력, 저 noise의 넓은 dynamic range의 출력이 나타남을 확인하였다. 따라서 고출력의 자기 tape를 제조하기 위하여는 자성분의 size, 형상, 표면화학 특성 및 자기특성이 자성분 선정의 중요한 요건임을 확인하였다.

• Applied Science and Convergence Technology
• /
• 제25권6호
• /
• pp.124-127
• /
• 2016

Humidity calibration for a temperature-stable quartz oscillator (TSQO) was investigated to exclude the influences of relative humidity on the TSQO output in order to use the corresponding devices outdoors. The TSQO output is a voltage that is inversely proportional to the electric impedance of the quartz oscillator, which depends on the viscosity and density of the measured gas. The TSQO output was humidity calibrated using its humidity dependence, which was obtained by varying the relative humidity (RH) from 0 to 100 RH% while other conditions were kept constant. The humidity dependencies of the TSQO output were fit by a linear function. Subtracting the change in the TSQO output induced by the change in humidity, calculated with the function from the experimentally measured TSQO output for a range of 0-100RH%, eliminated the influence of humidity on the TSQO output. The humidity calibration succeeded in reducing the fluctuations of the TSQO output from 0.4-3% to 0.1-0.3% of the average values for a range of 0-100RH%, at constant temperatures. The necessary stability of the TSQO output for application in hydrogen sensors was below one-third of the change observed for a hydrogen leakage of 1 vol.% hydrogen concentration, corresponding to 0.33% of the change in each background. Therefore, the results in this study indicate that the present humidity calibration effectively suppresses the influence of humidity, for the TSQO output for use as an outdoor hydrogen sensor.

• 설비공학논문집
• /
• 제22권11호
• /
• pp.788-797
• /
• 2010

This study examines the influence of fluctuating daylight illuminance on daylight dimming control systems. Field measurements were performed for a full-scale mocked-up model under various daylight conditions in winter. Fluctuating ranges for a partially-shielded photosensor were great when the variation of sky ratio was great. When solar altitude was lower the illuminance and fluctuating range of illuminance were great due to the influence of direct components of daylight and the interrefelction between surfaces in rear area of space. It implies that daylight dimming system would not function effectively, unless the desktop illuminance by daylight is enough. Fluctuation ranges of photosensor illuminance were lower than 50 lx under clear sky conditions, but they were greater than 100 lx under partly-cloudy sky conditions. It means that the fluctuation range of electric light output of lighting fixture would greater under the partly-cloudy conditions and cause potential visual annoyance to occupants. Outdoor vertical illuminance reaching the windows would be an effective factor that can be used to predict the fluctuation of photosensor signals for effective controls of daylight dimming system.

• 설비공학논문집
• /
• 제22권8호
• /
• pp.553-561
• /
• 2010

This study examines the influence of light variation on visual responses in a small office space where a daylight dimming control system is applied. Field measurements and survey were performed in a full-scale mocked-up small office space under clear sky day conditions. Maximum fluctuation range for desktop was 133.5 lx and it just happened once for entire monitoring period. For the majority of time, the fluctuation range did not exceed 50 lx, which did not cause visual discomfort to subjects. The daylight dimming control system successfully kept required illuminance levels for an office environment when desktop illuminance by daylight ranged up to 300 lx. The most serious contributor to the sensation of glare was direct daylight through window. The dimming of electric light was not a significant contributor to visual discomfort for the subjects under clear sky day conditions. Visual comfort was significantly influenced by the sensation of glare, feeling for visual stimulation and distraction, and required illuminance level.