• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.276-277
• /
• 2002

One of drawbacks of the inertial impactor measurement is the required long sampling time (Keskinen et al., 1992). In a gravimetric method, an impaction substrate must be weighed and placed on the corresponding collection plate before being assembled. After sampling, the inertial impactor is disassembled and the collection plate is weighted again. The sampling time depends on the sampled particle mass because the collected particle mass must be sufficiently high to be measured by a sensitive microbalance. (omitted)

• Particle and aerosol research
• /
• v.8 no.1
• /
• pp.1-8
• /
• 2012

In this study, the collection efficiency of inertial impactors was numerically simulated by employing the statistical Lagrangian particle tracking(SLPT) model. The SLPT model was proven to be correct in predicting the impactor collection efficiency, when the numerically obtained collection efficiencies were compared with the experimental data of Marple et al.(1987) at normal pressure level and the experimental data of $Marjam{\ddot{a}}ki$ et al.(2000) at low pressure level. Based on the validation results, balloon-borne impactors with the cut-off sizes of $1{\mu}m$, $2.5{\mu}m$, and $10{\mu}m$ were designed. Then, the sampling flowrates of the inertial impactors, required to keep the cut-off sizes constant at different pressures and temperatures, were estimated according to the altitude.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.227-228
• /
• 2000

가상 임팩터(virtual impactor)는 가속노즐(acceleration nozzle)아래에 충돌판(impaction plate) 대신 가상의 공간을 가진 수집관(receiving tube)이 설치되어 유선의 방향이 $90^{\circ}$로 바뀔 때, 큰 입자는 유선에서 벗어나 수집노즐에 포집된다(Hounam and Sherwood, 1965). 가상 임팩터에는 관성 임팩터(inertial impactor)와는 다르게, 절단입경(cut-size)보다 큰 입자를 분리할 수 있는 부 유동(minor flow)과 절단입경보다 작은 입자를 분리할 수 있는 주 유동(major flow)으로 나눈다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.320-321
• /
• 2002

가상임펙터(virtual impactor)는 충돌판을 가지고 있는 관성임팩터(inertial impactor)와는 다르게 분리입경보다 큰 입자를 분리할 수 있는 부 유동과 분리입경보다 작은 입자를 분리할 수 있는 주 유동으로 나누어져서 입자의 튀김(bouncing)이나 재비산(reentrainment) 없이 입자를 분리 또는 농축할 수 있다. 하지만 관성임팩터처럼 여러 단을 연결하여 작은 입자를 분리할 수 없기 때문에 주로 큰 입자의 분리 및 농축에 쓰여왔다. (중략)

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.1
• /
• pp.67-76
• /
• 2003

Recently consideration of health and interest on bio aerosols have been growing steadily. In this study, inertial impactor, which can be used to collect airborne particles and bio aerosols, was newly devised for real-time observation on the particles collected on impaction plate. and named Visual Impactor. Flow field and particle trajectory in the space between nozzle and impaction plate was analyzed numerically, and the collection effciencies were calculated. Calibration and performance evaluation of the Visual Impactor was conducted with polydisperse aerosols generated from 0.1％ sodium chloride solution. Cut-off diameter from numerical simulation was in good agreement with that from experimental results. Because of particle bounce and particle deposition on nozzle tip due to short jet-to-plate distance, the collection efficiencies from numerical and experimental analyses were different slightly. Visual Impactor was used to collect airborne particles, and the features of collected particles could be seen in real-time. Airborne particles in different weather conditions (fine, cloudy, and rainy) were sampled and compared one another The features of collected airborne particles were dependent strongly upon relative humidity. In addition, with hours elapsing, shapes and colors of collected particles were changed by evaporation and surface tension, etc.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.59-60
• /
• 2000

에어로졸을 분리할 수 있는 장비로는 전기적 이동차 분석기(differential mobility analyzer), 싸이클론(cyclone), 습식 충돌기(impinger), 습식 싸이클론(wet cyclone), 확산 배터리(diffusion battery), 관성 임팩터(inertial impactor), 그리고 가상 임팩터(virtual impactor) 등이 있다. 이중 가상 임팩터는 설계 및 제작이 비교적 간편하고, 입자를 분리 및 농축하는데도 좋은 성능을 나타냄으로 널리 사용되어져 왔다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.155-156
• /
• 2002

관성임팩터(inertial impactor)는 입자의 관성을 이용하여 기류로부터 입자를 분리하는 장치이며 입자를 입경별로 포집하는데에 높은 효율을 가지며 작동하기에 간편하므로 널리 사용되고 있다. 하지만, 임팩터는 입자의 되튀김(bouncing), 재유입(reentrainment), 그리고 과적(overload)과 같은 입자와 충돌판의 상호작용에 의한 문제점이 있다. 일반적으로 이런 문제점을 해결하기 위해서는 충돌판의 표면에 그리스(grease) 또는 오일(oil)을 코팅하여 사용하는 방법이 있다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.207-208
• /
• 2003

현재 싸이클론, 임팩터, 원심분리기, 전기적 이동차분석기 등 다양한 기기들이 에어로졸을 샘플링 하거나 입경별로 분리하는데 이용되고 있다. 이러한 다양한 샘플러 중에, 임팩터는 설계 및 제작이 간편하고 입자를 쉽게 분리 및 포집할 수 있어서 입자 분리기술로 May(1945)가 개념을 처음 도입한 이래로 많은 연구가 진행되었고, 현재는 관성 임팩터(inertial impactor)의 단점을 극복한 가상 임팩터(virtual impactor) 및 컵 임팩터(cup impactor) 기술이 널리 적용되고 있다. 컵 임팩터 기술은 PM$_{10}$, PM$_{2.5}$ 등 많은 환경 계측 장비의 도입부에 사용되고 있는 기술이다 (중략)략)

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.3
• /
• pp.299-310
• /
• 1999

Effect of electrostatic and inertial forces on the pre-charged particle deposition was theoretically and experimentally studied by introducing the inertia impactor subjected to an electric field. To derive the analytic solution, we assumed that a flow was an ideal stagnation flow, a particle had saturation charges, and the electric field within the test section was uniform. On the other hand, $Al_2O_3$ particle groups were used as the test particles, which mean sizes were $1{\mu}m$, $3{\mu}m$, and $5{\mu}m$. To measure the deposition efficiency, the light scattering method was used. The results showed that the deposition efficiency was minimized at a certain nozzle velocity as increasing the nozzle velocity, only if the electric force was applied. As the electric field strength increased, $Stk_{50}{^{1/2}}$ was decreased, and its decreasing rate was reduced with increasing the flow velocity. Moreover the existence of electric field was against the cut-off performance of the inertia impactor.