• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.179-183
• /
• 2011

• Animal Bioscience
• /
• v.35 no.6
• /
• pp.838-846
• /
• 2022

Objective: Native plants can be used as additives to replace antibiotics to improve ruminant feed utilization and animal health. An experiment was conducted to evaluate the effects of Gentiana straminea (GS) on nutrient digestibility, methane emissions, and energy metabolism of Simmental calves. Methods: Thirty-two (5-week-old) male Simmental clves, with initial body weight (BW) of 155±12 kg were fed the same basal diet of concentrates (26%), alfalfa hay (37%), and oat hay (37%) and were randomly separated into four treatment groups according to the amount of GS that was added to their basal diet. The four different groups received different amounts of GS as a supplement to their basal diet during whole experiment: (0 GS) 0 mg/kg BW, the control; (100 GS) 100 mg/kg BW; (200 GS) 200 mg/kg BW; and (300 GS) 300 mg/kg BW. Results: For calves in the 200 GS and 300 GS treatment groups, there was a significant increase in dry matter (DM) intake (p<0.01), average daily gain (ADG) (p<0.05), organic matter intake (p<0.05), DM digestibility (p<0.05), neutral detergent fibre (NDF) digestibility (p<0.05), and acid detergent fibre (ADF) digestibility (p<0.05). Dietary GS supplementation result in quadratic increases of DM intake (p<0.01), ADG (p<0.05), NDF intake (p<0.05), and ADF intake (p<0.05). Supplementing the basal diet with GS significantly increased nitrogen (N) retention (p<0.001) and the ratio of retention N to N intake (p<0.001). Supplementing the basal diet with GS significantly decreased methane (CH₄) emissions (p<0.01), CH₄/BW^0.75 (p<0.05) and CH₄ energy (CH₄-E) (p<0.05). Dietary GS supplementation result in quadratic increases of CH₄ (p<0.01) and CH₄/DM intake (p<0.01). Compared with 0 GS, GS-supplemented diets significantly improved their gross energy intake (p<0.05). The metabolizable energy and digestive energy intake were significantly greater for calves in the 100 GS and 200 GS calves than for 0 GS calves (p<0.05). Conclusion: From this study, we conclude that supplementing calf diets with GS could improve utilization of feed, energy, and N, and may reduce CH₄ emissions without having any negative effects on animal health.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.2023-2025
• /
• 2008

To evaluate the potential of radioiodine labelled hypericin as a malignant glioma imaging agent, U-251 MG, U-373 MG, C6 glioma and fibroblast were treated with a I-123 labelled hypericin derivative and C6 glioma transplanted nude mouse were injected with a I-124 labelled hypericin derivative for a micro PET imaging. 2- Iodohypericin was prepared as a reference compound. In this paper, we describe the syntheses of 2- iodohypericin and 2-[$^{123}I/^{124}I$]iodohypericin and the results of a corresponding biological evaluation. In all glioma cell lines, 2-[$^{123}I$]iodohypericin uptake was increased in a time dependant manner and an accumulation of 2-[$^{124}I$]iodohypericin was observed in C6 glioma bearing nude mouse. These results suggest that radioiodine labelled hypericin can visualize a PKC overexpressed malignant glioma.

• Journal of the Korean Society of Industry Convergence
• /
• v.12 no.3
• /
• pp.163-169
• /
• 2009

A preheating module for domestic heating facility will increase a energy efficiency. That collects the wasted heat of exhaust gas and saves the energy. So a heating load is decreased because of a preheating that has a heating energy. Using of a preheating module, a boiler can reduce frequent operation of a burner. So it is increased persistence, decreased discharging noxious gases. Therefore we will intend to develop a heating facility that is a convenient system for the saving energy.

• Journal of Institute of Convergence Technology
• /
• v.5 no.1
• /
• pp.33-36
• /
• 2015

In recent years, developed and developing country such as U.S., Japan, and China push forward to enhance their manufacturing industry through national policies such as advanced manufacturing(U.S.), Industrie 4.0 (Germany), and Made in China 2025. Also, in Korea, Ministry of Trade, Industry, and Energy(MOTIE) claimed Manufacturing3.0 for encouraging domestic manufacturing industry. Manufacturing industry plays an important role in encouraging economy and employment. In this paper, we survey, analyze and summarize the current national policy for enhancing manufacturing industry.

• Polymer(Korea)
• /
• v.31 no.6
• /
• pp.512-517
• /
• 2007

The grafting of styrene, glycidylmethacrylate (GMA) or acrylic acid (AAc) onto kapok fiber were performed by $Co_{60}\;{\gamma}-ray$ radiation-induced graft copolymerization. Degree of grafting (DG) of copolymers were increased with increasing monomer concentration and radiation dose. In addition to we confirmed the introduced functional group and measured ion exchange capacity. Morphology of the ion exchange fibers and their structures were analyzed by SEM and FT-IR.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.2
• /
• pp.146-155
• /
• 2011

As the seriousness of environmental pollution being on a rise, a low carbon and environment-friendly design for energy efficiency has been issued. With respect to energy in the construction industry, an adoption of BIM which is possible for the various energy performance assessments in the early design phase has been actively working on. In the most cases of energy performance assessment, the data compatibility from the lack of standard software and format became a problem and the improvement for data compatibility system has been needed. This study is to develop the IFC based IDF converter as a middleware which connects between BIM software and energy analysis software. For the building energy performance assessment, Energy Plus and IFC are selected for the standard energy analysis software and its file format. Parameters are organized by steps and the integrated material library is built so it is trying to reduce the existing problem of energy software interface as much as possible. The development of IDF Converter will promote the spread of related fields with increasing the BIM standard and the utilization of energy performance assessment.

• Journal of the Korean Society of Industry Convergence
• /
• v.12 no.3
• /
• pp.157-162
• /
• 2009

Significant air temperature increases in urban areas are known as the heat island phenomenon in a global scale. Therefore, we use numerical model in order to analyze quantitative effects by using new & renewable energy on the heat island phenomenon in urban area. The present study quantitatively analyzes the Urban Heat Island Effects, Energy-Saving Effects, and Environmental Load Decrease Effect along New and Renewable Energy Application which is 10% of the Building Energy Consumption.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.2
• /
• pp.17-23
• /
• 2004

The effects of refining consistency and plate gap on the specific energy consumption and physical properties of liner were investigated. Higher refining consistency and narrower plate gap brought about the reduction of specific energy consumption to decrease the freeness. Refining consistency and plate gap did not affect the bulk, Taber stiffness and compression index. The reduction of freeness and/or the increase of specific energy consumption caused the decrease of bulk and Taber stiffness, but increased the compression index. The effect of grammage on bulk was not observed, but Taber stiffness and compression index were increased with grammage. The bulk was decreased with the reduction of freeness rapidly at the above 400 mL CSF, and then levelled off. It is expected that the reduction of energy consumption could be obtained from the application of higher refining consistency and narrower plate gap during refining.

• The Korean Journal of Food & Health Convergence
• /
• v.6 no.1
• /
• pp.1-8
• /
• 2020

The foremost problem in the agricultural industry in Ukraine is the issue of improving its energy resources efficiency. The existence of this problem is related to the substantial technological inferiority of the industry to those present in the developed countries, especially in terms of creation of no-waste production technologies of agricultural products. The direct effect on the solving of this issue has the necessity to ensure minimal energy costs during treatment of plant objects. This article presents the research results on the effect of electromagnetic energy on activation of plants development. It was found that each such object has its own individual energy resource and that forceful increase of the latter has specific maximum values and gives rise to the plant development process. At the same time, the implementation of the research results is hindered by some factors, among the most major of which are the following: lack of reliable and complete data on the bioenergy resources of plants, its "natural" chart; unavailability of research on the energy sources interaction processes and its effect on the physiological potential of biological objects, at least at the level of low series, absence of the appropriate electrotechnical equipment, including electromagnetic energy sources.