Kim, Hong-Joo;Kim, Lyun-Hee;Lee, Young-Hwan;Kim, Kyong-Sik
Land and Housing Review
/
v.3
no.2
/
pp.127-136
/
2012
The Korean government designated 10 innovation cities throughout the country in 2005 in order to resolve concentration on the capital region and to promote balanced development of localities. An innovation city is a future-type city equipped with environment for innovation and high-quality settlement environment in terms of residence, education and culture by accommodating public institutions and facilitating close cooperation among companies, universities and research institutes. Thus, for the early settlement and activation of innovation cities, this study suggested a plan to operate the current innovation city business centers from a mid- and long-term viewpoint rather than for a limited time. Through this study, we attempt to establish the roles of the centers so that they can play central roles in the move of public institutions, the development of industry-university-research institute clusters, the creation of innovations, and the spread of innovations, which are the goals of the development of public institutions, after the sites have been prepared.
Kang, Sun Young;An, So Youn;Lee, Min Woo;Kwon, Sim Kyo;Lee, Dong Hyuk;Jeon, Byung Hun;Kim, Kang Ju;You, Yong Ouk
Journal of Physiology & Pathology in Korean Medicine
/
v.29
no.1
/
pp.27-32
/
2015
Streptococcus mutans triggers dental caries establishment by two major factors. One is synthesis of organic acids which demineralize dental enamel and the other is synthesis of glucans which mediate the attachment of bacteria to the tooth surface. In the present study, we evaluated the effect of the ethanol extracts of Aconitum koreanum (A. koreanum ) on the growth and acid production of S. mutans. Ethanol extracts of the A. koreanum showed concentration dependent inhibitory activity against the growth and acid production of S. mutans, and produced significant inhibition at the concentration of 0.016 mg/ml compared to the control groups (p<0.05). The extracts inhibited S. mutans adherence to hydroxyapatite treated with saliva, and cell adherence was repressed by 50%, 54% at the concentration of 0.063, 0.125 mg/ml. On the study of activation of glucosyltransferase which synthesizes water insoluble glucan form sucrose, the ethanol extract of A. koreanum showed remarkable inhibition over the concentration of 0.016, 0.031, 0.063 and 0.125 mg/ml (p<0.05). Especially on the concentration of 0.063, 0.125 mg/ml, the extracts suppressed the glucan synthesis by 100%. We analyzed the component of the extracts of A. koreanum. The results showed that the extract of A. koreanum had strong phenolic compound, glycosides and organic acids. These results suggest that A. koreanum may inhibit the caries-inducing properties of S. mutans, and which may be related with strong phenolic compound, glycosides and organic acids.
Journal of the Korea Academia-Industrial cooperation Society
/
v.17
no.10
/
pp.131-138
/
2016
This study reviewed the status of domestic and foreign Architectural Information Systems and related laws, analyzed the state of the architectural service industry, and proposed the phased introduction of BIM into Architectural Information Systems. The adoption of BIM in Architectural Information Systems both at home and abroad is generally at an unsatisfactory level, with only Singapore assuming a leading role in this area through activities such as the provision of a separate BIM submission service. Since it is desirable for BIM to be applied to additional types of architecture when the architectural licensing procedure is introduced, the different phases of adoption were set after analyzing the scales and types of architecture as defined in related laws. By analyzing the participation rates of architectural design firms in each scale of architecture design, the results demonstrated that, as the number of floors and total floor area in the building increases, the proportion of small scale architectural design firms involved decreases, while that of large-scale architectural design firms increases. The adoption of BIM is occurring mostly within large-scale architectural design firms, which is why it is desirable for its introduction into Architectural Information Systems to be separated into phases from large-scale buildings to increasingly small-scale architecture. In conclusion, this study divided the adoption of BIM in Architectural Information Systems into 6 stages and, following the Architectural administration procedure, established a segmented road map for the gradual activation of BIM.
Maesil began to grow in Gwangyang after the old Mr. Yulsan Kim Oh-cheon brought 5,000 trees of maesil(Prunes mume) from Japan in 1931. Today, Gwangyang maesil comprises approximately 25% of total national output. Gwangyang produces a variety of foods, manufactured foods and beverages using maesil. Besides, numerous tourists came to the 15th Gwangyang International Ume Flower Culture Festival to enjoy the festival and appreciate blossoming ume flowers. More than 1.9 million people visited Blue Ume Flower Farm in Gwangyang in the year of 2010. As many visitors came to the city simultaneously, however, there occurred confusion. So, it is thought that the following measures are necessary to enhance the tourism value of Gwangyang maesil. First, a symbolic story for Gwangyang maesil or maehwa(ume flower) needs to be created. Second, snack foods for sightseers need to be developed. Third, diverse attractive elements to prolong tourists' stays are worth developing. Fourth, it is necessary for Gwangyang to hold competitions for ideas to activate tourism through maesil. Fifth, Gwangyang needs to promote collaborative development of tourist items and collaborative tourism marketing in close cooperation with neighboring cities and counties. Finally, it is worthwhile for Gwangyang to host an international fruits and seeds exposition or exhibition and it needs to strengthen active promotion and marketing suitable for the Smart Age.
Hwang, Eunmi;Kim, Gye Won;Song, Ki Duk;Lee, Hak-Kyo;Kim, Sung-Jo
Asian-Australasian Journal of Animal Sciences
/
v.32
no.11
/
pp.1776-1788
/
2019
Objective: The demands for measures to improve disease resistance and productivity of livestock are increasing, as most countries prohibit the addition of antibiotics to feed. This study therefore aimed to uncover functional feed additives to help enhance livestock immunity and disease resistance, using Acanthopanax sessiliflorus fruit extract (ASF). Methods: ASF was extracted with 70% EtOH, and total polyphenolic and catechin contents were measured by the Folin-Ciocalteu and vanillin assay, respectively. The 3D4/31 porcine macrophage cells ($M{\Phi}$) were activated by phorbol 12-myristate 13-acetate (PMA), and cell survival and growth rate were measured with or without ASF treatment. Flow-cytometric analysis determined the lysosomal activity, reactive oxygen species levels (ROS), and cell cycle distribution. Nuclear factor kappa B ($NF-{\kappa}B$) and superoxide dismutase (SOD) protein expression levels were quantified by western blotting and densitometry analysis. Quantitative polymerase chain reaction was applied to measure the lipid metabolism-related genes expression level. Lastly, the antibacterial activity of 3D4/31 $M{\Phi}$ cells was evaluated by the colony forming unit assay. Results: ASF upregulated the cell viability and growth rate of 3D4/31 $M{\Phi}$, with or without PMA activation. Moreover, lysosomal activity and intracellular ROS levels were increased after ASF exposure. In addition, the antioxidant enzyme SOD2 expression levels were proportionately increased with ROS levels. Both ASF and PMA treatment resulted in upregulation of $NF-{\kappa}B$ protein, tumor necrosis factor $(TNF){\alpha}$ mRNA expression levels, lipid synthesis, and fatty acid oxidation metabolism. Interestingly, co-treatment of ASF with PMA resulted in recovery of $NF-{\kappa}B$, $TNF{\alpha}$, and lipid metabolism levels. Finally, ASF pretreatment enhanced the in vitro bactericidal activity of 3D4/31 $M{\Phi}$ against Escherichia coli. Conclusion: This study provides a novel insight into the regulation of $NF-{\kappa}B$ activity and lipid metabolism in $M{\Phi}$, and we anticipate that ASF has the potential to be effective as a feed additive to enhance livestock immunity.
The culture and education are very active with the active policy and support to form the government's Maker Movement. The purpose of this study is to grasp the current status of the education sector of the domestic maker movement, which is increasing recently, and to propose a plan for activating maker education for the development of a positive direction. To this end, first, the current status and problems of domestic maker training are derived through in-depth interviews with existing maker training operators and participants. Second, based on the contents of the interview script, keyword analysis and its characteristics through the qualitative survey analysis program (NVIVO) are identified. Third, based on the analysis results, we propose a plan and development direction for domestic maker education. Based on the educators who performed maker training and the students involved, professional maker teachers were required for the professionalism of education, and the expansion of maker channels and professional networking of participating students was required. In addition, there was a need for specialized programs and appropriate policy support that reflected the characteristics of maker training. This study aims at contributing to the activation of maker education, which is a major field of maker movement, by helping to improve concrete support methods, training related educators, and educational environment for maker education.
The purposes of this dissertation are to demonstrate that DSC theromoanaytical methods of vulcanization can provide useful informations on the vulcanization characteristics of industrial formulations and also provides the potential basis for a rapid and complete method of sulfur and vulcanizing accelerator analysis for quality control. The influences of those factors such as heating rate, scan temperature, vucanizing accelerator's type and concentration upon vulcanization exotherm in NR and NBR compounds in the presence of vulcanizing accelerators such as TMTD,MBTS,DPG,TMTM,CBS, and MBT were evaluated by means of DSC. In order to examine the credibility in the DSC method, the same samples which were used for DSC method were studied to compare the DSC results with the ODR (Oscillating Disk Rheometer) data. The results obtained were as follows 1. In the DSC dynamic experiments, the observed enthalpy results from vulcanization depends upon the heating rate; In the range of 2 to $20^{\circ}C/min$ of heating rate, as the heating rate was increased the enthalpy change was also increased. However, over the heating rate of $30^{\circ}C/min$ it was observed that the enthalpy change was decreased as the heating rate was further increased. Without regard to the change of enthalpy, tremendous instantaneous heat evolving was observed in the range of high heating rates. 2. For the samples which are added with various vulcanizing accelerators, the activation energies of vulcanization were as follows; 3. Regarding to the influences of vulcanizining accelerator's types upon the characteristics of vulcanization exotherm, NR and NBR compounds in the presence of thiuramsulphide compounds type accelerators such as TMTD, TMTM, were exhibited sharper and higher vulclanization exotherm than others. From the resuts of DSC thermograms which was distributed in even shape in the broad temperature range, it was clearly shown that the guanidine compounds type accelerator such as DPG acts as a delayed acting accelerator. 4. In the comparison of DSC and ODR results, the dependency of temperature in the cure rate and the observed conversions show good agreements between two results. 5. In the same curatives, by the comparison of glass transition temperatures, it was possible to predict relative values of maximum torques. Consequently, from the present studies, it is shown that the DSC thermoanalytical method can provide an alternate new method for rapid and complete quality control analysis of rubber industry.
Korean Journal of Construction Engineering and Management
/
v.22
no.6
/
pp.96-106
/
2021
The PC structure based on the OSC (Off-Site Construction) is mentioned as a representative method of innovation in the construction industry that converts the existing construction environment from site-centered to factory production-transportation-site assembly. However, recent research on PC method has focused on improving the functions of subsidiary materials and improving the production system to increase productivity and institutional / policy R&D that can be universally applied to the life-cycle stage of ordering / design /construction is insufficient. In particular, the absence of standardized cost calculation standards makes it difficult to calculate and verify of objectified appropriate construction cost. So which is an obstacle to the activation of the PC method. In this study, the standards for construction costs of domestic and foreign PC method were surveyed and similar Construction Standard Production Rates were analyzed to confirm the product structure suitable for PC method. Subsequently, the construction procedures and input resources for each PC subsidiary materials were identified through on-site surveys to derive component for subsidiary materials, and the factors of change in the product according to the construction characteristics(height, weight of subsidiary material) were verified. As a result the standard product calculation system suitable for the site installation of the PC method for apartment was presented.
Proceedings of the Korean Institute of Information and Commucation Sciences Conference
/
2014.05a
/
pp.299-302
/
2014
Due to the convergence between digital devices and the development of wireless communication technology, bit-signal sensor miniaturization, building an Electronic Medical Record (EMR) which is a digital version of a paper chart that contains all of a patient's medical history and the information of Electronic Health Record (EHR), Ubiquitous healthcare (u-Healthcare) that can monitor their health status and provide personal healthcare service anytime and anywhere. Also, the appearance of cloud computing technology is one of the factors that accelerate the development of u-healthcare service. However, if the individual information to be used maliciously during the u-healthcare service utilization, leads to serious problems directly related to the individual's life because if it goes beyond the level of simple health screening and treatment, it may not provide accurate and reliable healthcare services. For this reason, we analyzed a variety of security issues related to u-healthcare service in cloud computing environment and described about directions of secure health information sharing system construction. In addition, we suggest the future developmental direction for th activation of u-healthcare industry.
In order to implement smart cities that will become living spaces in the fourth industrial revolution era, detailed privacy information such as residents' living information, buildings and facilities information must be collected and processed in real time. While city functions and convenience for individuals are being facilitated, threats to personal information exposure and leakage are also likely to increase at the same time. Therefore, the design concept for personal information protection should be considered and accordingly reflected from the stages of smart city design, technology development and operation planning of intelligent information (AI) facilities. The results of the analysis show that for activation of smart cities and operation of data-driven cities, the concept of Privacy by Design (PbD) has already been introduced in the institutional, industrial and technological aspects, particularly in the cases of European countries and the US. In order to strengthen the local and global competitiveness of smart cities and the country, Korea also needs to actively deploy PbD as a strategy to secure a data-driven economy, which is the core strategy for smart cities. Therefore, the study suggests policy implications focused on approaches to legislative improvement and technology development support, which reflect the basic properties of PbD as defined in the study.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.