• 로봇학회논문지
• /
• 제12권3호
• /
• pp.306-312
• /
• 2017

Recently, development of robot technology has been actively investigated that industrial robots are used in various other fields. However, the interface of the industrial robot is limited to the planned and manipulated path according to the target point and reaching time of the robot arm. Thus, it is not easy to create or change the various paths of the robot arm in other applications, and it is not easy to control the robot so that the robot arm passes the specific point precisely at the desired time during the course of the path. In order to overcome these limitations, this paper proposes a new-media content management platform that can manipulate 6 DOF industrial robot arm using 3D game engine. In this platform, the user can directly generate the motion of the robot arm in the UI based on the 3D game engine, and can drive the robot in real time with the generated motion. The proposed platform was verified using 3D game engine Unity3D and KUKA KR-120 robot.

• 한국산업융합학회 논문집
• /
• 제20권5호
• /
• pp.405-410
• /
• 2017

This paper deals with 3D simulation of industrial robot for automated manufacturing system. In order to evaluate the operational characteristics of the industrial robot system in the worst case motion scenario, flexible - rigid multibody analysis was performed. Then, the rigid body dynamics analysis was performed and the results were compared with the flexible - rigid multibody analysis. Modal analysis was also performed to confirm the dynamic characteristics of the robot system. In the case of the flexible-rigid multibody simulation, only the structural members of interest were modeled as elastic bodies to confirm the stress state. The remaining structural members were modeled as rigid bodies to reduce computer resources.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.546-548
• /
• 1998

This paper deals with ZMP trajectory generation in multi step walking of IWR-III(Inha Walking Robot) Biped Walking Robot. Biped walking is realized by combining 6-types of pre-defined steps and the actual ZMP can be used as a stability index of a robot. For the good tracking of actual ZMP, desired ZMP trajectory is generated during the whole walking time not for each step. Trajectory generation is performed considering velocities and accelerations of given via points using 5-th order polynomial interpolation method. As a result, balancing joints have a more smooth and continuous motion and actual ZMP has a better tracking ability. Numerical simulator is done by MATLAB to guarantee the walking of a robot satisfying the ZMP stability.

• 한국산학기술학회논문지
• /
• 제15권3호
• /
• pp.1236-1240
• /
• 2014

본 새로운 개념의 박물관에 기초한 로봇 박물관 "ROSIEUM"을 제안한다. 제안된 개념에 기초한 박물관의 역할들을 조사한다. 박물관 소장물로서의 로봇 콘텐츠 분류 체계 또한 제안한다. 로봇 콘텐츠의 수집 전시를 위한 구성은 최초봇 관, 대표봇 관, 한국봇 관, 구성봇 관, 체험봇 관, 이벤트 관으로 이루어진다. 또한 로봇 콘텐츠들의 유형들이 기술되었다. 모색된 로봇 박물관 "ROSIEUM"을 위한 주요 개념들과 구성 시나리오가 제시되었다. 또한 "ROSIEUM"의 운영 방식이 설계되고 구현되었다.

• 제어로봇시스템학회논문지
• /
• 제4권5호
• /
• pp.636-643
• /
• 1998

This paper is presents multivariable control scheme for industrial robot manipulators. The control scheme consists of two loops. The modeling error between linearized robot model and actual robot model is compensated in error compensation loop. The PID control loop is designed for pole assignment to stability of robot system and utilized for trajectory tracking. Alternatively computer simulation results are given for illustration purpose of suggested controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.971-974
• /
• 1992

The mobile robot may be composed of a robot and an AGV. In this paper, the ynamics of a robot part, such as reaction forces or required torques, are studied with assumption of the AGV in motion. These forces of a mobile robot are different from those of an industrial robot. A new robot is deigned and manufactured for the mobile robot.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.92-95
• /
• 2004

This study proposes an industrial rehabilitation robot system which can exercise two joints in 3 dimensional spaces. The robot kinematics analysis and the results of studies on each joint for the rehabilitation robot could verify possibility of rehabilitation motion to exercise a joint. The force and torques sensor not only measures a rehabilitation performance of subjects between the abnormal limb and the manipulator, but also carries out an important function of safety device to prevent accidents. Also, limit sensors and emergency stop switch are used for high safety in this system. In this real test, the possibility of rehabilitation robot system is evaluated by C&R ARM I which is similar to upper-limb.

• 한국소음진동공학회논문집
• /
• 제18권9호
• /
• pp.913-919
• /
• 2008

Dynamic characteristics of a wrist power transmission of an industrial robot are studied. The wrist power transmission has complex structure characteristics, because it is composed with several shafts and gear system. We used an analytical method to investigate the dynamic characteristics. An analytical model is a rigid model which is composed with masses and springs. Both bearing and gear contact model represent equivalent stiffness springs which are determined by the experiment. In order to investigate the dynamic tendency of the robot wrist power transmission, we simulate the analytical model. There is a dynamic analysis tool which is called the RecurDyn. To verify the analytic results, we experiment a signal analysis which is an overall noise level of the robot. By the parametric study of the element of the robot, we study an improvement method of dynamic characteristics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.146-151
• /
• 2002

The object of this study is an examination of source of robot noise and reduction of the noise and the vibration for an industrial robot system. As the first step in our study, the noise and the vibration from the robot are measured by microphones and by accelerometers and the source of the noise and the vibration are proved to be from the gear, shaft, and housing from the experiments. The occurrence of the noise may be classified according into kinds, Finally base on the result of the experiments, we consider a countermeasure for reducing the noise and the vibration of robot system by the parametric study.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.321.1-321
• /
• 2002

The object of this study is an examination of source of robot noise and reduction of the noise and the vibration for an industrial robot system. As the frist step in our study, the noise and the vibration from the robot are measured by microphones and by accelerometers and the source of the noise and the vibration are proved to be from the gear, shaft, and housing from the experiments. The occurrence of the noise may be classified according into kinds, Finally base on the result of the experiments, we consider a countermeasure fur reducing the noise and the vibration of robot system by the parametric study.