• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.3
• /
• pp.214-221
• /
• 2024

Objectives: People using pedestrian walkways within tunnels may be exposed to environmental hazards that can have adverse effects on their health. This study aimed to measure changes in the levels of particulate matter (PM10), black carbon (BC), and noise after the installation of safety walls on pedestrian walkways within tunnels. Methods: Measurements were taken at the entrances on both sides of a tunnel and at the central point, both before and after the installation of pedestrian safety walls. Additionally, measurements were conducted by distinguishing between non-rush hour and rush hour periods to account for variations in the number of vehicles using the tunnel. A SidePak was used for PM10 measurements, an aethalometer for BC, and a sound level meter for noise. Results: PM10 showed the highest concentrations at the center of the tunnel at both pre- and post-installation of safety walls, as well as during rush hour periods. After the installation, the concentration at the center was 31.09 ± 14.02 ㎍/m³ (19.44 ± 8.02% increase). During rush hour, BC concentration reached 2.28 ± 1.55 ㎍/m³, indicating a 26.71 ± 13.19% increase compared to non-rush hour. As for noise, installation of safety walls reduced noise levels about 3 - 6 dB (8.10 ± 3.31% decrease). Conclusions: It was confirmed that installing safety walls on pedestrian walkways within the tunnel can reduce noise levels. However, the interior of a tunnel is a poorly ventilated environment, and exposure levels vary depending on the length of the tunnel. Therefore, the development of safety measures related to this issue is warranted, and further research on harmful substances within the tunnel should be conducted.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.4
• /
• pp.314-323
• /
• 2006

This study was conducted to identify ingredients of thinners and to confirm reliability of material safety data sheets (MSDS) of thinners for public and workers' health. The 41 thinner products were collected from paint shops located in Busan and Gyeongnam province. The 12 thinner products among them were identified using product MSDS. GC-MSD was used to analyze 41 kinds of thinners qualitatively and quantitatively. The 12 products MSDS were compared with thinner's component through qualitative analysis to confirm MSDS. Chemical ingredients, such as Benzene, Toluene, and Xylene etc., of thinners were analysed in quantity. The 41 thinner products contained 17 disclosed specific, trade name, or generically described chemical solvent ingredients. These 17 ingredients came under 6 classes: alcohols, aromatic hydrocarbons, esters, glycol ethers, ketones, and mixtures. These 17 ingredients were important in the view of industrial hygiene and had occupational exposure limit in the ambient, such as toluene, xylene, acetone, nonane, EGEE, heptane, cumene, MIBK, indene, tri-methyl benzene, etc, were found in 41 kinds of thinners. Aromatic hydrocarbons were the most identified ingredient in thinners. Especially, the benzene, which induces leukemia, was found in 4 kinds of thinners. The content rates of benzene in thinners were 0.25~1.18%. The benzene in enamel thinner, which were 0.39~0.72%, was highest from chemical classification. The contents of toluene, which was found from 27 kinds of thinners, were 5.35~64.16%, which were highest in sobu thinner as 58.80%. Xylene was found from 22 kinds of thinners and contents of xylene were 4.61~72.42%. Acrylic thinner's contents of xylene were 12.06~51.05%, which was most high. It was found that contents of benzene were increased and frequency of detection was decreased through comparison with other study. The MSDS possession rate of paint shops was low as 29.27%. So it did not provide information with public or workers. Mean of agreement rate between MSDS and components of thinners through qualitative analysis was 42.01% and it has wide range from 8.3% to 75%. There are many deficiencies in MSDS about component of thinners. In some case of sample, expecially, despite containing benzene, information was not written it on MSDS.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.2
• /
• pp.242-253
• /
• 1998

South Korea has been producing asbestos over 60 years. The use of asbestos was over 50 years for production of asbestos slate and 27 years for asbestos friction materials including asbestos textile and brake-lining. Thus, it can be supposed that asbestos related diseases such as asbestosis, lung cancer and mesothelioma could be found in the vulnerable workers exposed to asbestos in 1955-1975, given the average latency period of 10-30 years. Asbestos was produced primarily by Japanese during World War II In Korea. The production of chrysotile peaked to 4,815 tons in 1944. From 1978 to 1984, 10,000 tons of asbestos were produced annually. However, the production was interrupted by raising labor costs and extinction of mine reserves, and finally they had to depend on import for the need of asbestos. In 1945, there were 16 asbestos mines, in total, with the addition of new asbestos mines in South Korea. Imports of asbestos was increased from 74,000 tons to 95,000 tons during the period of 1976 - 1992. But the imports was reduced to 88,000 tons in 1995. Since, in addition to the import of asbestos itself, the imports of asbestos products were increased as well and the accumulation of asbestos reached to 30,000 tons during the period of 1964 to 1993. In 1965, there was only one asbestos company with 207 employees. But the size of asbestos industry has been expanded so much that 118 asbestos companies could be found in 1993 with 1,476 workers. However, there was no record on the survey of asbestos concentration to which workers were exposed in any companies in 1983. The record of the air-borne concentration of the asbestos in textile working places in 1984 showed 6.7 fibers/cc by geometric mean(GM), but it was reduced to 1.2 fibers/cc in 1993. GMs of asbestos in working places for construction materials and asbestos textiles were also decreased from 1.7 fibers/cc to 0.55 fibers/cc during the period of 1984 - 1996.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.52-59
• /
• 2008

We have developed a new deep-towed marine DC resistivity survey system. It was designed to detect the top boundary of the methane hydrate zone, which is not imaged well by seismic reflection surveys. Our system, with a transmitter and a 160-m-long tail with eight source electrodes and a receiver dipole, is towed from a research vessel near the seafloor. Numerical calculations show that our marine DC resistivity survey system can effectively image the top surface of the methane hydrate layer. A survey was carried out off Joetsu, in the Japan Sea, where outcrops of methane hydrate are observed. We successfully obtained DC resistivity data along a profile ${\sim}3.5\;km$ long, and detected relatively high apparent resistivity values. Particularly in areas with methane hydrate exposure, anomalously high apparent resistivity was observed, and we interpret these high apparent resistivities to be due to the methane hydrate zone below the seafloor. Marine DC resistivity surveys will be a new tool to image sub-seafloor structures within methane hydrate zones.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.1
• /
• pp.38-48
• /
• 2004

Tropospheric ozone data in Korea for 1998-2002 were analyzed to assess the impact on vegetation. SUM06(sum of hourly concentrations at or above 0.06 ppm) and AOT40(accumulated exposure over a threshold of 40 ppb), widely used as ozone indices in the U.S. and Europe, were calculated based on hourly ozone concentration in 612 areas during 1998-2002 in Korea. SUM06 of the highest 30 areas were 5-12 ppm/hr which were almost the same levels of the U.S. average, and a crop loss of 5% would be expected. Ozone pollution in Seoul during 1998-2002 had decreased compared to that for 1990-97 except in the Northern area; however, ozone pollution in Kyunggi during 1998-2002 had been increased twice compare to the previous 5 years. Korea was divided into four regions: Seoul Metropolitan area, Jungbu, Honam, and Youngnam. Ozone pollution in the Seoul Metropolitan area was much higher during 1998-2000 than the other areas, but ozone pollution during 2001-2002 was almost the same in all four regions. Chunnam-Kwangyang na Kyungbuk-Gumi, famous industrial complexes in southern Korea, were significant ozone pollution areas. However, other industrial complexes, such as Incheon, Ulsan, and Kyunggi-Sihwa, were not polluted compared to their neighbors. Comparing all ozone indices, SUM06(yr), SUM06(3mon), AOT40(yr), AOT40(3mon), number of hours exceeding 100 ppb, 95 percentile, 99 percentile, and maximum concentration, it was determined reasonable to use SUM06(3mon), AOT40(3mon) and number of hours exceeding 100 ppb for evaluation of the chronic impact of ozone on vegetation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.2
• /
• pp.175-183
• /
• 2010

To understand the variation of macro benthos community according to the installation of structure and topographic placement in the shellfish farm on tidal flat, the practical example of the tidal shellfish growing area at Namsung-ri Goheung was observed. The results of the research for the field observation were summarized as follows. (1) The ground gradient of the shellfish farm was very flat below about $1^{\circ}$. The shellfish farm ground took the shape of $\sqcup$ from the shoreline to the place of 150 m seawards, and the shape of $\sqcap$ from there to the low tide line. During ebb tide, the $\sqcup$ shape ground stored the sea water, and the $\sqcap$ shape ground was supposed to act as the effect factor to leak slowly or to prevent the outflow. (2) The oyster shell bag or the type of riprap wall as the boundary in the shellfish farm was classified into five types. The air exposure time and flooding time were 181 and 434 minutes, respectively. (3) In the numerical experiment, the deep-sea water wave coming in the study area had 0.5 m of maximum wave height to show the very stable conditions and the wave direction pattern of S-direction was dominant at Naro great ridge, and SE, SSW and S-direction were distributed strongly around the shellfish farm. (4) By the grain size analysis, the sediment around tidal flat consisted of gravel 0.00~5.81(average 1.70)%, sand 14.15~18.39(average 13.23)%, silt 27.59~47.15(average 30.84)% and clay 35.79~55.73(average 36.19)%, and the sediment type was divided into (g)M(lightly gravelly mud), sM(sandy mud) and gM(gravelly mud) by Folk's diagram. (5) The macro benthos community survey conducted in this site in January, 2010 showed that 1 species of Mollusca, 8 species of Polychaeta and 2 species of Crustacea appeared, and 11 species occupying over 1% of total abundance were dominant.

• Tuberculosis and Respiratory Diseases
• /
• v.64 no.3
• /
• pp.210-214
• /
• 2008

Chemical pneumonitis is an occupational lung disease that's caused by the inhalation of chemical substances. Its severity depends on the characteristics of the substances, the exposure time and the susceptibility of the patients. Hydrogen sulfide is not only emitted naturally, but it also frequently found in industrial settings where it is either used as a reactant or it is a by-product of manufacturing or industrial processes. Inhalation of hydrogen sulfide causes various respiratory reactions from cough to acute respiratory failure, depending on the severity. Two pharmaceutical factory workers were admitted after being rescued from a waste water disposal site that contained hydrogen sulfide. In spite that they recovered their consciousness, they had excessive cough and mild dyspnea. The simple chest radiographs and high resolution computed tomography showed diffuse interstitial infiltrates, and hypoxemia was present. They were diagnosed as suffering from chemical pneumonitis caused by hydrogen sulfide. After conservative management that included oxygen therapy, their symptoms, hypoxemia and radiographic abnormalities were improved.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.1
• /
• pp.45-63
• /
• 2019

The number of domestic construction company is expanding every year while the construction workers' exposure to disaster risk is increasing due to technological advancements and popularity of high-rise buildings. In particular, the industry faces greater fatalities and severe large scale accidents because of construction industry characteristics including influx of foreign workers with different language and culture, large number of aged workers, outsourcing, high place work, heavy machine construction. The construction industry is labor-intensive, which is to be completed under given timeline and consists of unique working environment with a lot of night shifts. In addition, when a fixed construction budget is not secured, there is less investment in safety management resulting in poor risk management at the construction site. Taking account that the construction industry has higher accident risk rate and fatality rate, risky and unique working environment, and various labor pool from foreign to aged workers, preemptive safety management through risk factor identification is a mandatory requirement for the construction industry and site. The study analyzes about 8,500 cases of construction accidents that occurred over the past 10 years and identified risk factor by construction industry sector to secure a systematic insight for risk management. Based on interrelation analysis between accident types, work types, original cause materials and assailing materials, there is correlation between each analysis factor and work industry. Especially for work types, there is great correlation between work tasks and industry type. For reinforced concrete and earthwork are among the most frequent types of accidents, and they are not only high in frequency of accidents, but also have a high risk in categories of occurrence.

• Journal of Popular Narrative
• /
• v.26 no.1
• /
• pp.243-277
• /
• 2020

This paper examines a social and cultural history of horror films through the keyword "technology", focusing on The Spark of Fear: Technology, Society and the Horror Film (2015) written by Brian N. Duchaney. Science fiction film is closely connected with technology in film genres. On the other hand, horror films have been explained in terms of nature/supernatural. In this regard, The Spark of Fear, which accounts for horror film history as (re)actions to the development of technology, is remarkable. Early horror films which were produced under the influence of gothic novels reflected the fear of technology that had been caused by industrial capitalism. For example, in the film Frankenstein (1931), an angry crowd of people lynch the "monster", the creature of technology. This is the action which is aroused by the fear of technology. Furthermore, this mob behavior is suggestive of an uprising of people who have been alienated by industrial capitalism during the Great Depression. In science fiction horror films, which appeared in the post-war boom, the "other" that manifests as aliens is the entity that destroys the value of prosperity during post-war America. While this prosperity is closely related to the life of the middle class in accordance with the suburbanization, the people live conformist lives under the mantle of technologies such as the TV, refrigerator, etc. In the age of the Vietnam War, horror films demonize children, the counter-culture generation against a backdrop of the house that is the place of isolation and confinement. In this place, horror arises from the absolute absence of technology. While media such as videos, internet, and smartphones have reinforced interconnectedness with the outside world since the 1980s, it became another outside influence that we cannot control. "Found-footage" and "torture porn" which were rife in post-9/11 horror films show that the technologies of voyeurism/surveillance and exposure/exhibitionism are near to saturation. In this way, The Spark of Fear provides an opportune insight into the present day in which the expectation and fear of the progress of technology are increasingly becoming inseparable from our daily lives.

• Journal of Industrial Convergence
• /
• v.22 no.2
• /
• pp.73-83
• /
• 2024

The purpose of this study is to diagnose various problems arising around social enterprises in the sport field from the perspective of the organization and derive necessary tasks and implications. In order to achieve the purpose of the study, the study was largely divided into three stages, and the results were derived. First, the main status and characteristics of social enterprises in the sport field were examined. The current status was analyzed focusing on aspects such as background and origin, legislation and policy, organizational goals, organizational structure and procedures, and organizational characteristics. Social enterprises in the sport sector were in their early stages, and the government's social enterprise policy goal tended to focus on increasing the number of social enterprises in a short period of time through financial input. In addition, it was found that most individual companies rely on government subsidy support due to insufficient profit generation capacity. In the second stage, we focused on the situational factors that affect the functional performance of social enterprises in the sport field. As a result of reviewing the value, ideology, technology, and history of the organization, which are situational factors, it was derived that when certified as a social enterprise in the sport field and supported by the central government or local governments, political control is strong to some extent and exposure to the market is not severe. In the last third step, tasks and implications were derived to form an appropriate organization for social enterprises in the sport field. After the social enterprise ecosystem in the sport sector has been established to some extent, it is necessary to gradually move from the current "government-type" organization to the "national enterprise" organization. This is true in light of the government's limited financial level, not in the short term, but in order for the organization of social enterprises in the sports sector to survive in the long term.