• Journal of Korean Academy of Nursing
• /
• v.9 no.2
• /
• pp.63-72
• /
• 1979

This study was performed to investigated of characteristics of male diploma nursing students. Data were collected by means of a mailed questionnaire. The sample included 29 respondents from 3 diploma nursing colleges during the period of Nov. 1st-15th, 1978. Major findings included. 1 ) Motive by which the objects of this investigation have chosen the science of nursing. Twenty-one (72.4%) responded, “As nursing occupation is a public welfare work, ”the highest rate, eighteen (62.3%) chose on advices of their parents and acquaintances. Seventeen (58.6%) reflected as a means of life with an occupation in hope of employment abroad. 2) Appreciation of nursing occupation. Twenty-two (75.9%) of opinions that the nursing job is called for by society was pre-dominent. While eighteen (62.1%) replied, “It is the job fit for the male sex, too.”“It is admitted as specialized occupation.”, or“It needs various human relation.”3) Degree of satisfaction wilt the science of nursing. Fifteen (51.7%) responded neither satisfied nor dissatisfied, while eight (27.6％) indicated as “satisfied”and four (13.8%) as“dissatisfied.”4) Degree of satisfaction with the faculty. Sixteen (55.2%) replied, “common, ”the highest, while ten (34.5%) indicated as“dissatisfied, ”two (6.9%) as“satisfied.”The reason for dissatisfaction with the faculty; The responses regarding dissatisfaction was twenty-three (79.3%) as insufficiency of the faculty. Thirteen (44.8%) indicated“the lack of personal cultivation of the faculty.”, And eleven (37.9%) indicated as“the quantitive shortage of the faculty, ”or“the vagueness of learning estimation.”5) Degree of satisfaction with the clinical, training. Eight (27.6%) responded as“common, ”or “dissatisfied, ”while seven (24.1%) indicated as“satisfied.”Reason for dissatisfaction with the training ; Twenty (69.0％) indicated“deficiency of personal treatment to the students of the men of business in the hospital”with respect to the reason, eighteen (62.1％) was indicated as gap between theory and practice, while eleven (37.9%) indicated“insufficiency of the equipment and materials of the hospital.”6) Interest in employment after graduation. Twenty-five (86.2%) indicated“going abroad”while fifteen (51.7％) indicated “education of nursing, ”which were the highest responses. Thirteen (44.8%) chose“Community Health Nursing (Health Center, Industrial Health).”7) Interest an employment during clinical nursing. Sixteen (55.2%) was interested in an operating room or the department of anesthesia, while fifteen (51.7%) was indicated “psychiatry, ”Eight (21.6%) chose a intensive care unit or a emergency room.

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.141-149
• /
• 2020

The Korea Industrial Standards (KS) stipulates methods and test procedures for measuring the horizontal combustibility of cellular plastics exposed to small flames (KS M ISO 9772:2018) and recommendations regarding the magnetic digestion of extruded polystyrene insulation (XPS) for measurement results (KS M 3808:2020). Although products that are certified to conform to KS standards must have burning characteristics (self-extinguishing), they are incinerated and spread by welds at construction sites, causing significant human and property damages. In this study, XPS produced by five companies, certified by KS, and sold in the market were purchased and tested for ignition and diffusion caused by a weld bullion at a construction site. The results showed that the five products had differences in performance. Three out of the five products were found to be self-saturated, but the other two were easily ignited and diffused, making it difficult for them to be self-extinguishing. Based on the result of this experimental investigation in line with the KS regulations, all the three types of products, including two types of products that were incinerated through weld defects, were found to be non-self-extinguishing, as specified in KS M 3808.

• International Journal of Railway
• /
• v.1 no.4
• /
• pp.143-148
• /
• 2008

This paper is the output of a collaborative European project concerning the barrier free accessibility for disabled persons to regional and long distance trains in Europe. Disabled people represent around 13% of the population in Europe. This is approximately 63 million people. The range of disabilities includes people with reduced mobility including wheel chair users, viewing and hearing impaired people and other forms of impairment. Improving accessibility aims at contributing to the provision of public transport services to all citizens in an equitable way. The purpose of the project was to analyse and to evaluate the existing solutions at selected European railways for all required modules at the entrance (doors, information and safety solutions), to derive a design concept, to develop a mock-up in meeting the needs of rail travellers with the above mentioned impairments and to test it with user groups. The project also aims at deriving components for the determination of standards. The EUPAX Design Mock-up test was performed to verify the advantages of the layout of the train segment including the different modules such as access area (including the access door, gaps between platform and train as well as boarding aid devices), entrance vestibule, information systems inside and outside the train, emergency facilities, toilet with all conveniences and the additional test arrangements regarding push buttons, steps and emergency equipment. For this purpose a questionnaire was developed for the assessment of the EUPAX segment and the additional test arrangements. With the help of this questionnaire it was possible to execute a quantitative and qualitative evaluation. During three test phases 67 experts and handicapped persons from 6 countries have evaluated the Industrial Design mock-up based on this questionnaire. The test group covered persons from North (Denmark) to the South (Italy) and from the West (Spain) to the Middle of Europe (Germany). This is especially important for the generalization (harmonisation) of the results for all European countries. According to COST 335 the information for people with reduced mobility should be clear, concise, accurate and timely. So that all information can be received from persons, they must be transferred on at least two of the three possible ways (acoustical, visual, tactile), a so called "2-sense-principle". Based on the results ergonomic specifications/ solutions for the ergonomic design of the access area, the acoustic, visual and tactile information and the emergency devices including the emergency communication system were developed, related to the benefiting passenger groups.

• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.395-402
• /
• 2005

The most important point when we engage on waterway dredging work is supplying safe navigational passage to the vessels underway by narrowing dredge work area and removing submerged dangers. In order to meet this end it is necessary to use auxiliary equipment for shifting actively and mooring and adopt automation of dredging work by integrating information on real time position, dredging depth, and work information. The dredger with a spud control system in this study, by the way, is able to employed on continuous dredging work with the narrowest working area allowing wide and safe passages to vessels underway, by moving the dredger to the working zone with the spud controlled automatically. Furthermore, it has been improved definitely compared with the existing dredging process management system such that it shows the track of spud and working depth on the electronic navigation chart of window, together with the final outcome of dredging work. The test dredging work at the entrance of Busan North Port for system evaluation showed that actual working time available was twice of the one by the existing anchor system, and that it reduced $38\%$ of time for preparation work and one man power.

• Journal of the Korean association of regional geographers
• /
• v.19 no.1
• /
• pp.75-96
• /
• 2013

This paper is to conceptualize the urban social circulation of water from the social constructivism and political ecology, and to analyze the history of development of social circulation of water, that is, the modernization process of water in Daegu. The development of social circulation system of water in Daegu can be divided into 4 stages, that is, the beginning stage of modernization of water mainly during the period of Japanese colonization, the take-off stage from the 1960s to the mid-1980s, the stage of reflexive modernization from the late 1980s to the 1990s, and that of neoliberalization of water since the 2000s. It can be seen that the development of social circulation system of water in Daegu has contributed the increasing urban population and economic development, especially supporting the spatial expansion of the city and the way of modern way of urban life. But the social circulation system of water in Daegu seems to meet with a lot of problems such as relocation of the water intake station, over-equipment of filtration plants, distrust on tap water, inequality of water use, readjustment of water charge, liquid waste from industrial complexes within the urban area, creative destruction of waterfront environment, and privatization of water.

• Journal of the Korean Institute of Gas
• /
• v.24 no.4
• /
• pp.84-92
• /
• 2020

Most facilities in chemical plants operate in environments that are outside the range of temperature and pressure that can be encountered on a daily basis, and are vulnerable to aging due to these stresses and environmental conditions. The facilities exposed to these conditions are not only likely to fail due to cumulative damage, but also lead to accidents if maintenance and replacement are not performed.Recommendation guidelines called risk-based inspection are widely used around the world-wide. However, limits exist for facilities that have already elapsed for a certain. As a result of the survey on the aging of Ulsan industrial complex in Korea, which carries out proper inspection, many of the facilities have been used for 20 years. Also, most of the facilities where the accident occurred have been in operation for more than 20 years. Therefore, this study suggested criteria for classifying devices that have exceeded a certain period of use as obsolete facilities. In addition, quantitative risk assessment was conducted. The safety investment method using the cost-benefit analysis method was proposed in order to calculate the loss cost and reduce the risk by expressing the risks of the corresponding aged facility as an Economic index. By utilizing the method of cost-benefit analysis of old facilities using the quantitative risk assessment presented in this study, it can be expected to improve the performance and life of old facilities, improve production efficiency and reliability of the system of facilities, change the recognition of safety management costs, increase employee stability, and reduce loss costs.

• Resources Recycling
• /
• v.15 no.4 s.72
• /
• pp.36-43
• /
• 2006

There was some difficulty dewatering properties due to small porosity diameter of cake, when pigment sludge contained fine particle was formed by cake under the dewatering. It was difficult to dewater the sludge with fine particles with the conventional mechanical dewatering method. This study was to improve the dewatering rate as discharging the water from porosity of cake easily, supplying the low heat to the cake layer. Thermal dewatering equipment of piston type to keep up constant temperature on the cake was set up and relative experiment was conducted for sludge of 200 g with fine pigment particle. As test results. filtration of 176.8 g, cake weight of 19.4 g, cake thickness of 4.2 mm was measured, and it was analyzed that the water content of cake was 47 wt% and dewatering velocity, which moaned the residual d교 sloid amount per dewatering area, was $2.1DS\;m^{2}{\cdot}cycle$. This results showed that filtration increased, cake weight and thickness decreased and dewatering velocity increased against mechanical dewatering method. And water content of cake decreased about 30%, so the result which dewatering rate improved was drew generally. The reason is that the inner vapor pressure working at the cake porosity increased as applying the low heat to the cake layer, which lead to discharge the water from porosity easily. Therefore, this study was estimated by the useful technology for sludge reduction.

• Journal of the Korea Management Engineers Society
• /
• v.23 no.4
• /
• pp.49-72
• /
• 2018

Before the financial crisis of 1997 in Korea, many industrial sectors across the country have achieved remarkable economic growth since the 1970s because of the development of large-scale equipment industries such as civil engineering, steel, construction and chemical industries. However, after the financial crisis, the economic growth rate has slowed down. Also, the global recession and the rise of China in the global business environment have led to a long-term recession in the national industry as a whole. In current economic environment, it is not easy for the companies even having excellent resources to continue its competitive advantage. Moreover, the chemical industry, which has an influence as a basic industry of other industries, misses the point of transformation into a high value-added industry, as shown in previous research. In order to meet the rapidly changing global business environment, Korean chemical companies should have a dynamic capabilities which to rapidly reallocate and consolidate the resources and capabilities they possess. The dynamic capabilities to convert, rearrange and develop the resources possessed by the company in the direction of creating high added value and to promptly search for, absorb, transform and fuse newly required capabilities and resources should be continuously applied to Korean chemical companies. It is the core competence to secure competitive advantage. In order to secure the dynamic capabilities of the company, the dynamic capabilities of individual employees should be strengthened and employees should be able to demonstrate their own leadership so that they can proactively work and self-manage in a positive direction. Previous studies have focused mainly on the dynamic capabilities of firms. However, the competence of the human resources that make up the enterprise leads to the capabilities of the enterprise, and the human resources themselves are also important corporate resources. This paper focuses on the dynamic capabilities of individuals and strives to clarify the causal relationship between dynamic capabilities, self-leadership, and organizational effectiveness which have direct or indirect effects on management outcome. The reasons for choosing the chemical industry are based on the fact that a domestic chemical companies are in a long-term recession, and they lacks a innovation and value creation capabilities. Also, chemical industry has a large impact on the national economy.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.546-555
• /
• 2019

The purpose of this study was to improve the performance of the bogie-type crematory, which is the mainstream of domestic crematory equipment. A field scale technology was investigated via increasing the volume by changing the shape of the furnace and reducing the cremation time and saving the energy usage through the optimization of burner combustion control. First, the optimized structural design through thermal flow analysis increases the volume of the main combustion chamber by about 70%, which increases the residence time of the combustion flue gas. A designed pilot crematory was then installed and the combustion behavior was tested under various operating conditions and the optimum operating plan was derived from for each furnace shape. Based on the results, the practically applicable crematory was designed and installed at Y crematorium in the P City. Optimal combustion conditions could be derived through operating the demonstration crematory furnace. The crematory time and fuel consumption could be minimized by increasing the energy efficiency by increasing the residence time of high temperature combustion flue gas. In other words, the crematory time and fuel consumption were 38 min and $21.8Nm^3$, respectively which were shortened by 44.1 and 54.4% lower than that of the existing crematory, respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.6
• /
• pp.781-787
• /
• 2014

The dimensionless extinction constants of particulate matter for F-76 diesel and JP-8 aviation fuels were measured at both 633 nm and 853 nm in the transmission cell where the simultaneous gravimetric measurement of PM concentration is compared to the light extinction measurement. For the F-76 diesel PM, the average value of the dimensionless extinction constants at 633 nm was 8.8 whereas that of the dimensionless extinction constants for JP-8 was 9.8 at the same wavelength. As the wavelength is increased to 853 nm, the average value for the F-76 diesel was reduced to 8.2 whereas that for JP-8 was decreased to 8.9.