• 산업경영시스템학회지
• /
• 제31권1호
• /
• pp.108-115
• /
• 2008

Future war needs a lot of changes for military organization. In this circumstance, it is importance the role of the Military Equipment Command Separation (MECS). In case of Korea Marine Corps, in spite of being MECS, Marine Corps has formed supply chain depended on Amy and Navy even it. Thus we proposed a new SCM of Marine Corps with Sense and Response concept. There are many problems and arguments to implement of new SCM. Therefore it is essential solving the problems but we don't know core problems and right solving directions. So, In this study, we present core problems deduction and selection of solving direction using TP(Thinking Process).

• 대한안전경영과학회지
• /
• 제19권4호
• /
• pp.35-42
• /
• 2017

A number of plating companies have been exposed to the risk of fire due to unexpected temperature increasing of water or other reasons in a plating bath. Since the companies are not able to forecast the unexpected temperature increasing of plating bath and most of raw materials in the bath have low ignition temperature, it is easy to be exposed to the risk of fire. Thus, in previous study, we tried to monitor and notice the dangerous change of temperature of water immediately to prevent the risk of fire from plating process. However, unfortunately previous studies were not able to shut out the fundamental cause of fire since bath temperature sensor can detect air temperature when the level sensor was malfunctioned. In this paper we developed the Teflon heater which contains a built in temperature sensor and improved plating equipment system. Teflon heater is improved using Pt $100{\Omega}$ sensor which can detect until $600^{\circ}C$. When the bath temperature sensor detects over $60^{\circ}C$ or the Teflon heater sensor detects over $240^{\circ}C$ they temporarily shut down the heater to control temperature. Also relay completely shuts down main power when detects instant temperature is detected over 5% of $240^{\circ}C$ by the heater sensor to prevent teflon melting down and fire spreads. Developed plating equipment system can monitor a real time temperature in the teflon tube and bath water. Therefore we think the proposed plating equipment can eliminate the possibility of fire in plating processes fundamentally.

• 터널과지하공간
• /
• 제23권1호
• /
• pp.42-53
• /
• 2013

천공 작업 시 드릴비트 버튼의 타격 속도와 타격 간격은 천공효율을 높이는데 있어 매우 중요한 요소이다. 따라서 본 연구에서는 버튼의 타격 속도 및 간격에 따른 암반 파쇄성능을 분석하기 위하여 홉킨스바 시험기를 이용한 타격시험을 수행하였다. 먼저, 버튼의 타격속도에 따른 암석파쇄 현상을 분석하기 위하여 단일타격 시험을 수행하였고, 수치해석을 통해 단일 타격 시험에 대한 암석의 파쇄과정을 모사하였다. 다음으로 버튼의 타격 간격에 따른 천공효율을 예측하기 위하여 타격 후 설정된 거리만큼 암석 시료를 이동시키고 재차 타격하는 방식으로 다중타격 시험을 수행하였다. 타격시험 후 암석의 천공부피는 레이저 스캐너를 이용하여 측정하였으며, 타격에너지와 천공부피를 통해 천공성능을 계산하였다. 이러한 시험 결과를 바탕으로 직경 102 mm 드릴비트의 1회 타격 시 천공성능을 예측하였다.

• 한국산학기술학회논문지
• /
• 제17권9호
• /
• pp.369-374
• /
• 2016

냉각탑은 옥탑이나 건물 외부에 설치하여, 실내의 온도제어를 위해 사용된다. 냉각탑의 운전시 모터, 팬 및 낙하되는 냉각수에서 발생되는 소음 진동은 주변으로 전파가 용이하여, 인접한 건물 내부의 소음 진동 문제를 야기할 수 있다. 본 논문은 공장에 인접해 위치한 산업용 냉각탑의 진동 소음을 측정하여, 공장 내부의 정밀장비에 미치는 영향을 평가하였다. 정상 운전조건에서의 냉각탑의 소음을 측정하고, 냉각탑에서 일정거리 떨어진 공장의 바닥과 공장 내부에 위치한 정밀장비를 대상으로 진동을 측정하여, 냉각탑과 정밀기계의 진동 소음 평가기준에 의해 냉각탑의 진동 소음이 정밀장비의 정밀도에 미치는 영향을 분석하였다. 측정결과 냉각탑의 소음은 동일 용량 냉각탑의 기준 소음치인 68dB(A)보다 4~9dB(A) 높다. 냉각탑의 진동이 정밀장비에 미치는 영향은 냉각탑이 위치하는 건물 지지 프레임의 진동이 정밀장비가 위치한 바닥의 진동보다 낮아 영향은 미미하다. 정밀장비가 위치한 실내 바닥은 진폭은 허용기준치 안에 들어가나 진동 가속도 레벨 기준으로는 높게 나타났다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2006년도 추계학술대회
• /
• pp.332-335
• /
• 2006

This paper considers a facility location problem, which is concerned with locating facilities on a supply chain network and installing the associated equipments at the facilities to meet a given set of demands. The objective function is to minimize the sum of setup cost (facility opening cost and equipment installation cost), operation cost, and distribution cost. For the equipments, various choices of equipment modes need to be determined. Moreover, in the problem, overwork is allowed each facility but at expensive operation cost. The proposed problem is characterized as being NP-hard problem, so that a heuristic algorithm is derived. In order to evaluate the performance of the proposed algorithm, computational experiments with various numerical instances are conducted.

• 한국산학기술학회논문지
• /
• 제11권8호
• /
• pp.2958-2962
• /
• 2010

마이크로컨트롤러 AVR를 이용하여 미세전류 경혈치료기를 개발하였다. 이 치료기는 정현파, 삼각파, 구형파, DC를 출력할 수 있다. 정현파, 삼각파 등의 주파수 범위는 1 - 320 Hz이고 DC의 출력 범위는 $40-200\;{\mu}A$이며 출력시간은 1 - 30 분으로 조절가능하다.

• 산업경영시스템학회지
• /
• 제25권1호
• /
• pp.49-55
• /
• 2002

For making a lead terminal(condenser, resistor etc.), it is the matter that lead wire have to be supplied smooth without twisting and curving when it is supplied to the further processing (cutting, forming, attach process) after it being forwarded. The purpose of this study is to solve the winding claims of lead wire through the structural expansion of winding equipment to which the improvement of packing equipment to forward safely and supply the lead wire and QFD method are applied. The results of this study is available to solve the technical problem caused by the installation of the existing flyer system for the prevention of twisting and can expect the quality assurance as it prevents the claim(surface fault) caused by the bumping among lead wire which are involved in the packing equipment in its moving stage.

• 산업경영시스템학회지
• /
• 제17권31호
• /
• pp.99-114
• /
• 1994

The introduction of new equipments to strengthen the competitiveness of enterprises is one of pretty important factors. Enterprises introducing new equipments strengthen competitiveness through productivity increasing, high quality maintenance, inventory reduction, improved design and production interface, simple scheduling process, low scrap rate, rework reduction, etc. Managers will work out the best equipment-replacing strategy through the appropriate combination of potential cost attributes and qualitative attributes difficult to quantify in accordance with the business purpose. This study is to present a method to select an equipment-replacing alternative through the decision-making model of Analytic Hierarchy Process in consideration of the differences of cost flow of the alternatives, taking into consideration tangible attributes and strategic intangible attributes.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2004년도 품질경영모델을 통한 가치 창출
• /
• pp.298-301
• /
• 2004

European Union Member States shall ensure that, from 1 July 2006, new electrical and electronic equipment put on the market does not contain mercury, cadmium, lead, hexavalent chromium, polybrominated biphenyls(PBB) or polybrominated diphenyl ethers(PBDE) (by Directive 2002/95/EC of The European Parliament and the Council of 27 january, 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment ). So, It is important to develop lead free solder and to assure the reliability of appliance. But lead free solder(i.e. Sn-3Ag-0.5Cu) have some problems such as lift off, whisker, migration and crack, etc. In this paper we discuss the reliability assurance method in lead free solder and appliance.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2007년도 춘계학술대회
• /
• pp.122-130
• /
• 2007

On the basis of analysis of the characteristic of production operations in tobacco enterprise, this paper explores the social environment and basic conditions of Tobacco Sales Enterprise, the system architecture and function module of the Supply Chain System of the Tobacco Sales Enterprise are described and it also discusses the application and management of supply chain system.