• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2007.11a
• /
• pp.7-11
• /
• 2007

This paper considers a shipment planning of products from manufacturers to a third-party warehouse for demands with production time windows where a demand must be replenished in its time window. The underling lot-sizing model also assumes cargo delivery cost in each inbound replenishment to the warehouse. For this model, an optimal O($nT^4$) is presented where n is the number of demands and T is the length of the planning horizon.

• IE interfaces
• /
• v.11 no.3
• /
• pp.55-63
• /
• 1998

In this study we consider a CONWIP system in which the processing times at each station follow an exponential distribution and the demands for the finished products arrive according to a compound Poisson process. The demands that are not satisfied instantaneously are assumed to be lost. We assume that the lot size at each station is greater than one. For this system we develop an approximation method to obtain the performance measures such as steady state probabilities of the number of parts at each station, average number of parts at each station and the proportion of lost demands. For the analysis of the proposed CONWIP system, we model the CONWIP system as a closed queueing network with a synchronization station and analyze the closed queueing network using a product form approximation method. A recursive technique is used to solve the subnetwork in the application of the product-form approximation method. To test the accuracy of the approximation method, the results obtained from the approximation method were compared with those obtained by simulation. Comparisons with simulation have shown that the accuracy of the approximate method is acceptable.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.4
• /
• pp.25-34
• /
• 2009

A cross-sectional study was conducted to assess the association between musculoskeletal workload and psychosocial job stress variables from 100 employees from a cable making industry. It was found that the employees who had to do musculoskeletal hazardous tasks suffered higher psychosocial stress in 'decision latitude', 'job insecurity' and 'psychological job demands' also. The employees with higher level of psychosocial job stress in 'psychological job demands' and 'score of the "type A" personality' responded that they had higher 'physical job demands' from the task irrespective of its musculoskeletal hazardousness. These results confirm that musculoskeletal workload were associated with both physical and psychosocial work factors. Attention should be paid to psychosocial work factors along with physical workload to prevent musculoskeletal disorders in the manufacturing industries.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.12
• /
• pp.568-574
• /
• 2001

The variations of real time electric power price in competitive electricity markets have influence on electric power demands of the consumers. The effects of the consumers for electric power price can be expressed the price elasticity coefficient of the power demand as a measurement. Residential, commercial, and industrial consumers with different characteristics cause the different price elasticity of the power demand due to changing the pattern of consumption. It is necessary that the effects of electric power demands as a function of elasticity coefficient for each loads should be analyzed in Korea which is processing deregulated electric market. Therefore, this paper calculate the elasticity coefficient of each loads and analysis the effects of electric power demands as a function of elasticity coefficient of inflexible and flexible consumers in competitive electricity market.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.3 no.3
• /
• pp.75-78
• /
• 1980

1) The great expansion of industrial activity based on largely upon the products of scientific research, with widespread ownership and with greater demands on accounting for financial control and reporting. 2) The search for productivity, through the development of the mass production systems in industry, with their great emphasis on cost accounting and efficiency 3) The trend toward greater government influence In the affairs of business through taxation and regulation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.42
• /
• pp.31-38
• /
• 1997

The main objective of this research is to develop a model to select the optimal input service level for a distribution center - multi branch inventory distribution system. With the continuous review policy, the distribution center places an order for specific order quantity to an outside supplier, and the order quantity is replenished after a certain lead time. Also, each branch places an order for particular order quantity to the distribution center to satisfy the customer demands, and receives the replenishment after a lead time. When an out of stock condition occurs during an order cycle, a backorder is placed to the upper level to fill the unfilled demands. With these situation, variable demand and variable lead time are used for better industrial practice. Further, actual lead times with a generic lead time distribution are used in developing the control model. Under the actual lead time model, the customer service measures actually attained for the distribution center and each branch are explained as the effective customer service measures. Thus, throughout the optimal control (using computer search procedures), we can select the optimal input service levels for the distribution center and each branch to attain the effective service level for each branch which is consistent with the goal level of service for each branch. At the same time, the entire distribution system keeps minimum inventories.

• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.3
• /
• pp.213-223
• /
• 2004

We consider the traffic grooming problem for the design of SONET/WDM(Synchronous Optical NETwork/Wavelength Division Multiplexing) ring networks. Given a physical network with ring topology and a set of traffic demands between pairs of nodes, we are to obtain a stack of rings with the objective of minimizing the number of ADMs installed at the nodes. This problem arises when a single ring capacity is not large enough to accommodate all the demands. As a solution method, an efficient algorithm based on the branch-and-price approach has been reported in the literature for the problem in which only unidirecional path switched ring (UPSR) was considered. In this study, we suggest integer programming models and the algorithms based on the same approach as the above one, considering two-fiber bidirectional line switched ring(BLSR/2), and BLSR/4 additionally. Using the results, we compare the number of required ADMs for all types of the ring architecture.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.3
• /
• pp.89-93
• /
• 2007

In this study, we consider an assembly line operated under a base-stock policy. A product consists of two parts, and a finished product transfers to a warehouse in which demands are satisfied. Assume that demands arrive according to a Poisson process and processing times at each production line are exponentially distributed. Whenever a demand arrives, it is satisfied immediately from an inventory in the warehouse if available; otherwise, it is backlogged and satisfied later by the next product exiting from production lines. In either case, an arriving demand automatically triggers the production of a part at both production lines. These two parts will be assembled into a product that eventually transfers to the warehouse. We obtain a closed form formula of approximation for delay time or lead time distribution of a demand when a base- stock level is s. Moreover, it can be applied to the optimal base-stock level which minimizes the total inventory cost. Numerical examples are presented to show our optimal base-stock level's quality.

• Structural Engineering and Mechanics
• /
• v.34 no.1
• /
• pp.39-60
• /
• 2010

In Turkey, majority of industrial facilities are composed of precast buildings. However, precast buildings have suffered extensive damage during Kocaeli and Duzce (1999) and Adana-Ceyhan (1998) earthquakes. Therefore, in this study, fragilities of existing building stock and damage probabilities of precast buildings were studied. For this purpose, building inventories were prepared and variation of structural parameters was determined by investigating the design project of 65 precast buildings constructed in Denizli, Turkey. Twelve analysis models which reflect the stiffness, strength and ductility properties of building inventory were constructed. After the definition of strain based displacement limits and corresponding damage states for buildings, displacement demands were calculated by using non linear time history analysis. During the analyses 360 strong ground motion records were used. Exceedence ratios of concerned damage limits was calculated by checking the displacement demands and then PGV based fragility curves were constructed. Efficiency of strength, stiffness and ductility properties of existing precast buildings were investigated by comparing the fragility curves. The results have shown that the most effective parameters that govern the damage probabilities of precast buildings are stiffness and ductility. It was also stated that the results of fragility analysis and damage and failure observations performed after Kocaeli and Duzce Earthquakes are compatible.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.5
• /
• pp.607-616
• /
• 2019

On account of the lack of education of Brazilian worker, this paper analyzed the characteristics of those professionals working in the production sector of timber houses. A sectoral survey was carried out with respective entrepreneurs to investigate the available professionals (career and contract types), evaluate the demands of skilled workers, and indicate solutions to improve the quality of labor qualification. Similarly, over 65% of sampled producers presented both direct-hired and outsourced workforce. For such contract ways, Civil Engineers and Architects were the main careers. Carpenters, Civil Engineers and Architects experienced on timber were the main sectoral demands. Timber Engineers have good potentials of service for this sector. The creation of courses on timber products can emerge as a key alternative to train people.